Left SurfaceQuote list
Amron Two-Diver Air Control and Depth with Comms
Amron International logoAmron International

Amron Two-Diver Air Control and Depth with Comms

Part no. 8225IC-01

The Amron International 8225iC-01 Two Diver High/Low Pressure Air Control with Depth Monitoring and a Communicator is a portable, self-contained system for surface supplied commercial diving operations. IMCA Compliant

Price on requestMake an enquiry →
Quotes returned within one business day. Defence and government pricing available. Got a question first? Make an enquiry.
Serviced by Left SurfaceWe service, repair and certify this equipment in our Sydney workshop — every job tracked in your Client Portal.Service query →

Overview

This system is specifically designed with three independent diver channels that are compliant with the International Marine Contractors Association (IMCA) guidelines - IMCA D023 DESIGN for Surface Oriented Air Systems.

The Model 8225iC-01 is housed in a durable, pressure-fused fiberglass case that provides a convenient, compact, rugged and professional system.

The system comes standard with a field proven AMCOM II Series Communicator that is a full-featured two-diver communicator with independent microphone and earphone volume controls for the tender and each diver. The communicator can operate in both 4-wire (full duplex) or 2-wire modes. The communicator has a built-in internal charger and can be operated using 90-264 VAC, an internal 12 VDC battery, or an external 12 VDC power source.

Features

  • The Amron International Model 8225iC-01 is designed to support two-divers and is a portable, self-contained high/low pressure air control with depth monitoring (pneumo) and a communication system for surface supplied commercial diving operations.
  • It is a central control point for the supply of breathing air to the divers. This Amron system monitors the divers' depth and provides superior diver communications for two commercial divers and topside personnel.
  • Model 8225iC-01 is housed in a durable, pressure-fused fiberglass case that provides a convenient, compact, rugged and professional system.
  • This system is specifically designed with two independent diver channels that are compliant with the International Marine Contractors Association (IMCA) guidelines - IMCA D023 DESIGN for Surface Oriented Air Systems.
  • The system comes standard with the field proven 2825A-04 AMCOM II Series Communicator and is a full-featured two-diver communicator with independent microphone and earphone volume controls for the tender and each diver. The communicator can operate in both 4-wire (full duplex), or 2-wire modes. The communicator has a built-in internal charger and can be operated using 90-264 VAC, an internal 12 VDC battery, or an external 12 VDC power source.

High Pressure

  • High air pressure inputs are color coded (Red and Blue) for ease of identification.
  • Each input has a 0-6000 PSIG gauge and shut off valve to monitor and switch from one high pressure air source to the other.
  • The added safety feature of check valves provides protection against back flow of air from a full tank into an empty tank when switching high pressure air supply sources.
  • High pressure air is reduced to low pressure via a pressure reducing regulator with a pre-regulator in-line 50 micron filter.
  • A relief valve (factory set at 350 PSIG) prevents over pressurization.

Low Pressure

  • Divers air hose connections are O2 fittings, controlled by quarter turn ball valves permitting unrestricted flow. Note: O2 fittings can be converted to JIC upon request.
  • The LP inputs with safety check valves have a #6 JIC fitting and are protected from over pressurization by an over pressure relief valve set at 350 PSI.

Pneumo (Depth Monitoring)

  • The heart of the pneumo system are 2 ea. 6 in. gauges with 0.25% of full scale accuracy and dual scale readings of 0-250 feet of seawater (FSW) and 0-76 meters of seawater (MSW). The gauge dials have a glare free face, mirror band with clearly marked increments for fast accurate readings with 1 ft. divisions.

Communication

  • The 2825A-04 Two-Diver Hardwire Communicator is a full-featured communicator with independent microphone and earphone volume controls for the tender and each diver.
  • The communicator has a built-in internal charger and can be operated using 90-264 VAC, an internal 12 VDC battery, or an external 12 VDC power source.
  • Can be operated in both 2-Wire and/or Full Duplex (4-Wire) communication modes. Modes can also be used simultaneously.
  • The communicator comes standard with Microphone Auto Detection that identifies the type of microphone each diver is using and automatically adjusts for optimum performance. This communicator can operate with any combination for both dynamic and pre-amplified microphones.
  • Ultra-low noise, wide band width amplifier circuit combined with noise suppression circuitry produces crystal clear speech. The amplifier’s Automatic Gain Control (AGC) circuit prevents audio signal distortion and enhances speaker protection and audio quality.
  • The audio amplifier card deploys a state-of-the-art, Class-D digital audio power amplifier. It has very low power dissipation, generates minimal heat, and enhances battery life.
  • EMI is minimized through spread-spectrum and de-phase control techniques providing for optimum integration with diving systems.
  • The built-in internal charger allows for simultaneous charging and operation of the unit while protecting the rechargeable battery from being overcharged. Automatically supplies power to the audio amplifier when AC power is disconnected to allow for continued operation.
  • The noise canceling, hand-held, push-to-talk microphone improves the quality of communication by eliminating topside noise to the divers.

Specifications

High Pressure
(2) Inlet Connection#4 JIC (stainless steel)
(2) Inlet ValveRegulating type
(2) Input Gauge0-6000 PSI: accuracy +/- 1.5%
(2) In-Line Filter50 micron
Regulator Input Range500-5000 PSI
Regulator Outlet Range0-400 PSI
Regulator High FlowCv = 0.8
Low Pressure
(2) Inlet Fitting#6 JIC
(4) Check Valve1 PSI
(4) Control SourceBall valve
(1) CrossoverBall valve
(2) Diver OutletBall valve
(2) Output FittingOxygen
(2) Pressure Gauge0-600 PSI: accuracy +/- 1.5%
(1) Over Pressure Relief Valve Set Pressure350 PSIG
Pneumo (Depth)
(2) Pneumo GaugeMirrored scale, 6 in., dual scale 0-250 FSW/0-76 MSW, 0.25% of full scale
(2) Pneumo ValveRegulating type, KEL-F seat
(2) Pneumo Output FittingOxygen
Communication
Input Impedance (Each Input)250 Ω
Frequency Response300 - 10000 Hz
Common Mode Rejection40 dB minimum
Current Drain Maximum Full Volume3 amps
Minimum Quiescent0.190 amps
Output Impedance4 Ω
Power Supply Voltage12 VDC nominal (9 VDC min - 16 VDC max)
AC Power Operating Range90-264 VAC, 50-60 Hz
Sensitivity (Input)0.5 mV
Output Power (RMS @ 4 Ω load, 12 VDC)10 watts audio
Battery Life45 hours
Panel
Panel MaterialBlack Textured Semi-Gloss Polyester coated over Stainless Steel
GraphicsRed, White and Blue
Dimensions
Lid Closed25-1/2 in. W x 20 in. D x 14-3/4 in. H
Lid Open25-1/2 in. W x 25 in. D x 28-3/4 in. H
Weight81 lb. (37 kg)
Case
Case MaterialPressure molded fiberglass, with aluminum and or stainless steel hardware. Includes carrying handle, latches, and stay hinge to lock unit in open position - upper section is locked upright in respect to lower section
ColorInternational Yellow

Options & accessories

Frequently asked questions

What is the input voltage range for the 2823-603 External Battery Charger?
The 2823-603 can operate over an input voltage range from 90-264 VAC. It operates over an input frequency range from 47-440 Hz.
Does this air control come with any documentation?
Yes, an inspection report is included with each unit. The pneumo gauges come with a calibration certificate and sticker.
What type of cable do I need to connect my Amron communicator to my Outland video system?
Amron communicators and Outland Technology’s video systems have a RCA Phono Jack. To connect the two systems together, you will need an audio cable with RCA Plugs on each end.
Can I operate my communicator while I’m charging the internal battery?
Yes, however, the charger will charge the battery at a slower rate as some of the charger power is being used to operate the communicator.