Image 1 of 8
Image 2 of 8
Image 3 of 8
Image 4 of 8
Image 5 of 8
Image 6 of 8
Image 7 of 8
Image 8 of 8
Specifications
DCS0001 Communication Cable
Shielded, Twisted Pairs: 2 x 0.5 mm2 (20 AWG)
Polyester Strength Braid: 500 kg minimum break strength
Red Polyurethane Outer Sheath: 1.7 mm nominal thickness
Weight in Air: 120 kg/km
Weight in Sea Water: 25 kg/km
O.D. mm: 11.0 mm
Diver side rubber molded connector - 4 socket female - used with KMDSI helmets P/N: RMG-4-FS
Surface side MS connector straight plug - 5-pin male P/N: MS-3116F-14-5P
Insulation Color: Red
FLT04 - 1/4 In. Pneumo Hose
Hose Type: Fibrolite
Max Working Pressure: 400 PSI / 27.5 bar
Minimum Burst Pressure: 1600 PSI / 110 bar
Nominal Bore: 1/4 in. / 6.3 mm
Outside Diameter: 11.5 mm
Weight in Air: 82 kg/km
Weight in Sea Water: -25 kg/km
Minimum Bend Radius (Static): 75 mm
Minimum Bend Radius (Dynamic): 115 mm
Tensile Rating: 100 kg
1/4 in. oxygen hose fitting, swaged (phosphor-bronze) P/N: FPBSF/M/04-04OXY
Hose Color: Yellow
FLT06 - 3/8 In. Breathing Air Hose
Hose Type: Fibrolite
Max Working Pressure: 500 PSI / 35 bar
Minimum Burst Pressure: 2000 PSI / 140 bar
Nominal Bore: 3/8 in. / 9.5 mm
Outside Diameter: 17.5 mm
Weight in Air: 193 kg/km
Weight in Sea Water: -53 kg/km
Minimum Bend Radius (Static): 105 mm
Minimum Bend Radius (Dynamic): 1160 mm
Tensile Rating: 100 kg
3/8 in. oxygen hose fitting, swaged (phosphor-bronze) P/N: FPBSF/M/06-04OXY
Hose Color: Blue
Notes
Umbilical lengths are subject to +/- 2% over/under the quoted length.
Australian Standards AS2299.1 3.13.6 requires that the minimum breaking strength of any potential load bearing component of a diver’s umbilical or lifeline shall be at least 6 kn (600 kg). This umbilical does not meet that standard. Please contact your Amron sales representative for alternate spiral umbilical material that can meet this standard.