PVL Underwater Gas Cutting Torch is specially developed for cost-efficient and fast underwater cutting, without constantly changing parts. With the PVL Cutting Torch, the diver is able to cut 20 to 24 meters per hour.
Because the PVL Cutting Torch uses Gas in combination with a specially developed cutting bracket, you can burn up to 1000 meters before the cutting bracket needs to be replaced. Investing in a sustainable PVL Cutting Torch can lead to significant cost savings for your company.
The Underwater Cutting Torch uses Oxygen and Gas as a cutting medium (See table below). It has a three-hose system, which uses one hose for the Gas, one for the Oxygen and one for the cutting Oxygen.
The PVL Cutting torches are delivered in a hard case including the unique in water igniting device.
There are two types of Cutting Torches available:
Model 1 with a 55° cutting head
Model 2 with a 90° cutting head
Your choice of model depends on the diver’s preferences.
The SDA Temperature and Humidity can help monitor comfortable and safe levels of temperature and humidity in diving chambers and dive systems.
The SDA Temperature and Humidity monitor provides a full-colour display of both temperature and humidity.
The alarm set points can be adjusted using the front panel user interface and the SDA Temperature and Humidity provides audio/visual alarms, optional data-logging and 4-20mA/relay outputs (for 1 reading). The monitor interfaces with a state of the art dual temperature and humidity probe.
The SDA Temperature and Humidity replaces the now obsolete Analox 4000 (Temperature) and Analox 7000 (Humidity).
Maintaining a comfortable temperature in a diving chamber or dive system is vital for the comfort and well-being of the divers and is required by classification bodies and industry guidelines. Relatively small changes in temperature can prove to be dangerous due to the thermal conductivity of helium.
Humidity levels also need to be maintained for the comfort and well-being of the divers. If the humidity level is too high this can encourage microbial growth which can cause health issues in the chamber.
The SDA Temperature and Humidity monitor can be located in sat/dive control or at the compressor. The probe is located either in the chamber or in the gas pipework:
Chamber Version
The probe is mounted inside the chamber is ideal for monitoring levels in a hyperbaric chamber, lifeboat or diving bell to help ensure a comfortable and safe living and working environment is maintained in line with industry guidelines.
Inline Version
The probe is mounted inside the gas pipework, ideal for monitoring the breathing gas supply temperature and humidity in line with classification requirements such as the ABS rules for building and classing underwater vehicles, systems and hyperbaric facilities.
The gas monitor reads results from a state-of-the-art, long-life digital electrochemical sensor. These results are shown on a full colour display.
The SDA ROC is used on some of the world’s most advanced diving systems including a new build vessel for the BP Exploration Shah Deniz II project in the Caspian Sea.
To ensure diver safety it is essential to monitor and control the rate of change (ROC) of pressure to avoid hazardous rates of decompression. If the ROC is too high there is an increased risk of divers suffering the bends.
The monitor provides alarms that are based not on the depth level but on the rate at which the depth is changing.
The SDA ROC monitors the pressure of an occupied dive chamber and triggers an alarm if the rate of change is too high. It does this by sampling readings from a depth sensor and applying an algorithm to smooth the effects of any sudden changes. The SDA uses the readings to calculate the ROC value which it then compares against its pre-set alarm thresholds.
The SDA dual oxygen (O₂) monitor measures oxygen (O₂) readings in both partial pressure (mbar O2) and as percent volume (%O2).
The dual SDA O₂ is a panel/rack mountable oxygen monitor with audio/visual alarms which comprises of an SDA monitor and a MEC sensor module, including the oxygen (O₂) cell. It is designed to be highly modular and flexible so it can be easily integrated into custom atmospheric monitoring solutions.
The dual SDA display has the ability to display oxygen (O₂) readings in both partial pressure (mbar O₂) and as percent volume (%O₂). This will allow the end user to read the levels of oxygen (O₂) in either parameter without having to carry out any conversion calculations.
A pressure sensor is required for the SDA O₂ to enable the display to be presented in partial pressure (mbar O2), this must take a reading from the same location as the gas measurement.
Information is communicated via Ethernet to the SDA O₂ display to calculate a partial pressure readout.
The unit monitors the chamber’s internal atmosphere by the use of external sensors. The alarm set points and calibration can be achieved using the front panel user interface. The SDA O₂ provides audio/visual alarms, optional data-logging and 4-20mA/relay outputs.
The SDA ROC sensor is attached to a habitation chamber, hyperbaric lifeboat or diving bell. To comply with DNV Offshore Standard 402, a digital interface is used between the sensor and the SDA. The ROC alarm constants can be changed to suit different chamber sizes and configurations. Two alarm thresholds can be selected: meters/feet of sea water per minute or meters/feet of sea water per hour.
The monitor provides a full-colour display of the oxygen (O₂) reading taken from an electrochemical sensor. The alarm set points and calibration can be achieved using the front panel user interface. The SDA O₂ provides audio/visual alarms, optional data-logging and 4-20mA/relay outputs. The monitor interfaces with our state of the art digital MEC sensor.
The SDA O₂ oxygen monitor replaces the now obsolete Analox 1000 and is fully retrofittable as a direct replacement.
Maintaining a comfortable and safe chamber environment is vital to achieving a successful diving operation. The accuracies supplied by the SDA O2 are compliant with DNV, IMCA, Lloyds, ABS, and ADCi requirements/guidelines.
The SDA O₂ is normally located in sat/dive control and the sensors can be either located at the panel or inside the chamber or diving bell.
We offer an optional flow panel to go alongside the SDA O₂ which provides fine control after the sample has been reduced from the chamber. Both the SDA O₂ and the optional flow panel can be provided as either rack or panel mount.
The SDA Helium (He) monitor is part of a range of panel/rack mountable atmosphere detection monitors designed with commercial diving in mind.
The SDA He monitor provides a full-colour helium (He) reading. To achieve maximum accuracy, it must be used in conjunction with the SDA O2 with the networking option selected.
The alarm set points and calibration can be achieved using the front panel user interface. The SDA He provides audio/visual alarms, optional data-logging and 4-20mA/relay outputs.
Helium is an expensive and vital saturation diving commodity. Monitoring the purity of the heliox in the reclaim system is vital for safety and for operations to remain cost effective.
The SDA He is normally located in sat/dive control and can be supplied in rack or panel mount configurations. Alternatively the SDA He can be placed in the helium reclaim area.
The SDA Depth provides a full-colour display of depth and pressure to help ensure the safety of your divers. The SDA is a range of panel/rack mountable atmosphere monitors originally designed with commercial diving in mind. The monitor provides a full-color display of the depth/pressure reading.
The alarm set points and calibration can be achieved using the front panel user interface. The SDA Depth provides audio/visual alarms, optional data-logging and 4-20mA/relay outputs. The monitor interfaces with a pressure sensor provided by Analox or can be set up to interface with a third party sensor which provides a 4-20mA output.
The SDA Depth replaces the obsolete Analox 6000.
Monitoring the depth of diving chambers is vital to the whole operation. Depth readings are also used with the gas readings to calculate the partial pressures to ensure the safety of the divers.
The SDA Depth is normally located in sat/dive control and can be supplied in rack or panel mount configurations. The pressure sensor is mounted in the hyperbaric environment.
The SDA CO+ carbon monoxide (CO) monitor provides a full colour display of the carbon monoxide (CO) reading taken from an advanced electrochemical cell, as well as offering pinpoint accuracy.
The SDA CO+ carbon monoxide monitor (CO) can be located in sat/dive control or at the compressor.
The CO+ adheres to strict CO standards including NORSOK 4-100, EH74/2 and BS8478 and has data logging capabilities.
The SDA CO monitor provides a full colour display of a carbon monoxide (CO) reading and is fast and accurate – designed for commercial diving in mind.
The gas monitor reads results from a state-of-the-art, long-life digital electrochemical sensor. These results are shown on a full color display.
The alarm set points and calibration can be achieved using the front panel user interface. The SDA CO provides audio/visual alarms, optional data-logging and 4-20mA/relay outputs.
The SDA CO replaces the obsolete Analox 3000 and is fully retrofittable as a direct replacement.
Diving system classification societies and industry bodies such as IMCA require/suggest that carbon monoxide levels are maintained at very low levels in a dive system as carbon monoxide is highly toxic.
Carbon monoxide (CO) can enter the diving system through an air compressor or a gas transfer compressor. It could also be present in the delivered gas and is metabolized by the divers so is produced in the chamber during operations.
The SDA CO can be located in sat/dive control or at the compressor. Both the SDA CO and the optional flow panel can be provided as either rack or panel mount.
The accuracies supplied by the SDA Depth are compliant with DNV, IMCA, Lloyds, ABS, and ADCi requirements/guidelines.
The SDA carbon dioxide (CO₂) monitor provides a full-colour display and can be used alongside a digital sensor like the 5S Mk3 to maintain a comfortable and safe saturation diving chamber.
The alarm set points and calibration can be achieved using the front panel user interface. The SDA carbon dioxide (CO₂) provides audio/visual alarms, optional data-logging and 4-20mA/relay outputs. The SDA carbon dioxide (CO₂) monitor interfaces with our state of the art digital 5S Mk3 sensor.
The SDA carbon dioxide (CO₂) monitor replaces the now obsolete Analox 5001 and is fully retrofittable as a direct replacement.
Maintaining a comfortable and safe chamber environment is vital to achieving a successful diving operation. The accuracies supplied by the SDA carbon dioxide monitor are compliant with DNV, IMCA, Lloyds, ABS, and ADCi requirements/guidelines.
The SDA carbon dioxide (CO₂) monitor is normally located in sat/dive control and can be supplied in rack or panel mount configurations.
Operating in a Hyperbaric or Hypobaric environment can be stressful enough, but how do you make sure that the environment is safe to breathe?
The Sub MkIIIF has been designed to be a flexible gas monitor. Configured to meet your specific requirements, the REM units allow for variable installation and location of sensors too.
Illuminated display providing an easy to read screen
Can connect to 3 REM units allowing for a greater degree of flexibility
Audio and visual alarms ensuring you are notified of a potential issue
Knowing what the oxygen (O₂) content is in your breathing cylinder is vital across various industries including diving and medical. To do this efficiently and cost-effectively, you need the Analox O₂ Portable.
The O₂ Portable is an oxygen monitor designed to provide sample readings from cylinders containing different levels of O₂. The O₂ Portable is supplied with a sampling adaptor to be easily fitted to cylinders.
Fitted with a temperature compensated sensor which offers an expected 3 year life
Water and drop resistance, perfect for when using onboard diving trips
Compact and robust with minimal maintenance costs
Fast and easily transportable
Applications where the O₂ Portable should be used include those working with enriched oxygen in:
Medical environments
Laboratories
Clinics and Hospitals
Dive filling stations and scuba schools where gas cylinders are checked on deck before a dive
The only hydrocarbon monitor in the world which can accurately monitor the hydrocarbon levels present in a deep sea diving bell.
The Hyper-Gas MkII is a unique, hyperbaric hydrocarbon monitor comprising of a bell monitor which contains a sensor manifold and a topside repeater which mimics the status of the bell monitor. The system is set to alarm at 10% of the amount of hydrocarbons required to cause anaesthesia and has both audible and visual alarms. The sound can also be muted so that it does not interfere with comms during an emergency situation.
Analox recommends that the operator keeps a minimum of one spare manifold on the vessel for every operational bell monitor.
Compact Bell monitor (which houses the manifold)
Topside repeater
Datalogging
Calibration and sensor replacement reminders
Audible and visual alarms
Mute function
Internal filtration and dryer
In 2000, IMCA released a reference document D 023 ‘Design for Surface Orientated (Air) Diving Systems’. Within the document, there was a recommendation for an oxygen (O₂) monitor. In response to the requirement, Analox designed the ADM Aspida.
Part of the Aspida family and manufactured in a small and rugged portable case, the ADM Aspida it is a cost-effective oxygen (O₂) and carbon dioxide (CO₂) monitor. It is operator maintained to ensure there is minimal downtime and enable reduced running & maintenance costs.
The ADM Aspida is available with sensors to monitor O₂ only, CO₂ only or dual gas. With a high IP rating, easy calibration functions and data logging, the ADM Aspida, a hyperbaric chamber monitor, offers an amazingly affordable price point for a great specification in the commercial diving industry.
IP65 rated, ensuring the unit is dust tight and protected against water
The unit can be used to analyse the air quality from a portable decompression chamber
ADM Aspida can be a dual monitor by adding a carbon dioxide (CO₂) sensor to the monitor
The ADM Aspida is supplied with datalogging function as standard, assisting you in keeping records
Optional faceplate to make it panel mounted
Applications
Diving
Medical
Say goodbye to fiddly tube tests and expensive lab analysis and say hello to a reliable, accurate monitor which can help you meet EN12021, DEF-STAN 68-284, CGA, CSA and OSHA compliance.
In the highly precise world of compressed breathing air, true professionals demand proven results, consistent reliability along with turnkey installation and maintenance. The Analox team recognises this and has built the ACG+ to answer these challenges.
Provides continuous monitoring 24/7
Low maintenance and is easy to install and maintain
Provides 90 days of datalogging which you can easily retrieve via a USB connection
Cost effective alternative to colorimetric tube testing
Supplied as either a fixed or portable version depending upon your needs
Can be used on any breathing air compressor
Digital display
Diving
Emergency Services
Manufacturing
Paint Spraying
Ships
Medical
The New Generation of Commercial Diving Helmet
D-ONE has been designed around the concept of modularity: One helmet shell to suit varying dive environments by means of interchangeable pods:
• Standard Pod for Air Diving
• Reclaim Pod for Air Diving in polluted/contaminated waters
• Rebreather & Reclaim Pod
STANDARD POD FOR AIR DIVING
D-ONE is supplied with a standard pod for air diving activities. It is easily removed and interchangeable with alternative pods for more specialized diving requirements.
Incorporating the latest smart technology for increased safety, ergonomics and functionality, features unique
to D-ONE include:
Same shell reconfigured as Air, Reclaim or Rebreather by means of interchangeable pods
Wide-angled viewport for increased field of vision
30° rear-angled ergonomic design allowing upward-tilting neck motion
Anti-flood fail-safe donning, sealing & removal
Polyurethane gaskets for premium durability in the saline environment
Balanced Demand Regulator for smooth breathing
Integrated welding shield/hot water shroud/defogger
Integrated video camera & light
DRASS-patented remote diver monitoring for real-time tracking of breathing patterns, bail-out pressure, depth & inclination
Optimized spare parts for easy, safe maintenance
The Amron International 8225iC-01 Three Diver High/Low Pressure Air Control with Depth Monitoring and a Communicator is a portable, self-contained system for surface supplied commercial diving operations.
This system is specifically designed with three independent diver channels that are compliant with the International Marine Contractors Association (IMCA) guidelines - IMCA D023 DESIGN for Surface Oriented Air Systems.
The Model 8225iC-01 is housed in a durable, pressure-fused fiberglass case that provides a convenient, compact, rugged and professional system.
The system comes standard with a field proven AMCOM II Series Communicator that is a full-featured two-diver communicator with independent microphone and earphone volume controls for the tender and each diver. The communicator can operate in both 4-wire (full duplex) or 2-wire modes. The communicator has a built-in internal charger and can be operated using 90-264 VAC, an internal 12 VDC battery, or an external 12 VDC power source.
Providing an invaluable free hand while performing underwater ultrasonic thickness measurement, the Cygnus DIVE is a robust, wrist-mountable ultrasonic underwater thickness meter with a large, bright display with live A-scan making it easily viewable by both the diver and camera - even in the poorest visibility.
The Cygnus DIVE, depth rated to 300 meters, is accurate, reliable and easy to use. The Cygnus DIVE is worn on the diver's forearm, availing an invaluable free hand while performing the thickness survey. A large, very bright color AMOLED display shows the thickness measurements in big numbers along with a live A-scan for verification. Power is supplied by a replaceable, rechargeable, Lithium-Ion battery pack that gives up to 11 hours continuous measurement.
The ultrasonic probe is connected by a coiled double jacket cable and rugged locking connector. Now with the option of Single Echo and Echo-Echo Modes for use with a Twin Crystal Probe, ideal for use on extremely heavy corrosion & anchor chain. Single Echo is for use on uncoated surfaces, and Echo-Echo for use through paint up to 0.5 mm thick.
An optional data logging feature is available for storing up to 5000 measurements and A-Scans. CygLink provides surface computer-based viewing and data logging. The Topside Repeater unit with Video On-Screen Display option allows the thickness measurements to be overlaid onto the monitor screen / video recording of the survey. HelmetView™ provides a helmet-mounted remote display of thickness measurements.
Harness in Hypalon neoprene 1500 with reinforced stitching.
Special oversized TIG welded stainless steel triangle ring on the top.
AISI 316 stainless steel D-rings.
Double stitched for extreme durability and resistance.
- Outer material in Cordura® 1000 (optional: PU Hazmat material for contaminated water diving)
- AISI 316 Stainless Steel backplate, Aluminum or Carbon Steel (optional)
- Traditional piston inflator
- Single inflator hose with pipe and inner metal wire
- 3 Over-pressure and exhaust valves
- Plate protection cover
- 4 Heavy duty Hypalon neoprene pockets (Option: fixed or removable)
- Quick connect LP hose
- Brackets for mono and double tank (optional)
- Optional buoyancy wing can be attached/added with interchangeable air cell: 20L, 27L, 22L/35L, 40L or 40+40L (- Inner bladder in Polyurethane Soltane F/B 400®)
Colour Options: Red, Black, Blue, Navy, Military Green, Yellow, White, Rescue Orange, Bordeaux
Breathable Dry suit, created for the activities on the surface.
> Breathable Trilaminate DS330
> Reinforced pads in Cordura® on knees and buttocks
> Neck Protector with velcro strap
> Integrated hood (optional).
Sealed on the inside with Sealing Tape (Aquasure® optional)
Neck and wrists: Neoprene (Latex or silicone on demand)
Socks: H.D. neoprene, Supratex® outer lining (Boots on demand)
Technopolymer dry zipper (front diagonal entry), protected with Cordura® flap
Bag for dry suit (included)
Adjustable internal suspenders (included)
Speleo-boots (optional)
Pockets (optional)
> MOLLE system (optional)
> Heavy Duty Knee protection (optional)
> Relief Zipper (optional)
> High Visibility Stripess (optional)
> Oral inflator (optional)
This Dry Suit is Made in Italy, in DiveSystem
Strong points:
> Breathable
> Resistance
> Excellent Lightness
> Excellent mobility
> Requires no assistance to be dressed
> Fast drying
Fully Breathable Dry suit, created for the activities on the surface. Realised in collaboration with military special task forces, using special materials and special tailoring techniques. Sealed with Aquasure like a dry suit for diving.
> Breathable Trilaminate DS330
> Special preformed knees ("pence") for maximum legs mobility.
> Diamond Underarm Gusset for maximum arms mobility.
> Neck Protector with velcro strap
> Reinforced pads in Cordura® on request.
Sealed on the inside with heavy duty polymer, Aquasure®
Neck and wrists: Neoprene (Latex or silicone on demand)
Socks: H.D. neoprene, Supratex® outer lining or Trilaminate
Technopolymer dry zipper (front diagonal entry) Protected with Cordura® flap or with extra Protection zipper
Bag for dry suit (included)
Adjustable internal suspenders (included)
Speleo-boots (optional)
Pockets (optional)
> MOLLE system (optional)
> Removable Neoprene Knee Pads (optional)
> Heavy Duty Knee protection (optional)
> Relief Zipper (optional)
> Pee Valve (optional)
> Valve ports (optional)
> Hideable High Visibility Stripess (optional)
> Oral inflator (optional)
This Dry Suit is Made in Italy, in DiveSystem
Strong points:
> Breathable
> Resistance
> Excellent Lightness
> Excellent mobility
> Requires no assistance to be dressed
> Fast drying
Breathable on the upper part and Trilaminate 4-1-4 on the lower part. Created for the activities on the surface that require the high-visibility of the operator. Sealed with
Aquasure like a dry suit for diving. Certified as PPE against chemicals (EN14605 and EN13034) and biological hazards (EN14126).
Breathable Trilaminate DS330 on the upper part, NATO Trilaminate 4-1-4 on the lower part. (Full Trilaminate NATO 4-1-4 or full Breathable DS330 on request, Fire retardant on request)
> Neck Protector with velcro strap.
> Inserti ad alta visibilità in Tilaminato di Nylon su petto, spalle e braccia.
> Reflective Bands compliant with EN 20471.
> Preformed knees (“pence”) for maximum legs mobility.
Special tailoring technique that ensures the maximum mobility on the knee.
> Diamond Underarm Gusset for maximum arms mobility:
Special tailoring technique that ensures the maximum mobility on the arm.
> Neck and Wrists Seal: Neopren, Latex (on request), Latex HD (on request), or Silicon (optional)
> Technopolymer dry zipper (front diagonal entry) protected with Trilaminate flap or with extra Protection zipper
> Footwear: H.D. Neoprene Socks in Supratex® or in Trilaminate with separated Speleo boots (included if standard), or FlexBoot (optional, integrated in the dry suit).
> Pockets: Big Cargo style. Both pockets have the internal partition and 2 bungee strings. Right pocket has an additional zipped pocket on the flap with 2 bungee strings.
> Valve Seats (allows the user to add scuba valves to the suit, transforming the Surface Shield in a proper Dru Suit for scuba).
> Adjustable elastic on the lumbar zone for fine adjustementof the waist circumference.
> Included Accessories:
Bag for dry suit
Adjustable internal suspenders
---
> Available optionals:
- MOLLE system
- Removable Neoprene Knee Pads
- Heavy Duty knee Pads
- Relief Dry Zipper
- Pee Valve
- Oral inglator
- Swiveling inflate valve and high-profile adjustable outlet valve
Strong points:
> Breatheable
> Superb Resistance
> Excellent mobility
> Requires no assistance to be dressed
> Lightness
> Fast drying
EXTRA Certifications (PPE CAT III):
> EN 14605 and EN 13034
(Certified as Protective Equipment against Chemicals hazard exposure)
> EN 14126
(Certified as Protective Equipment against Infective Agents exposure.)
DiveSystem Trilaminate Surface Dry Suit: Surface Shield RESCUE
A special BCD created looking for the maximum resistance possible. The air cell on the back allows the diver to choose to work in negative, neutral or positive buoyancy condition.
Harness in Hypalon neoprene 1500 with reinforced stitching.
Special oversized TIG welded stainless steel triangle ring on the top.
AISI 316 stainless steel D-rings.
Double stitched outer cell for extreme durability and resistance.
- Interchangeable air cell: 20L, 27L, 22L/35L, 40L or 40+40L
- Outer shell in Cordura® 1000 (optional: PU Hazmat material for contaminated water diving)
- Inner bladder in Polyurethane Soltane F/B 400®
- AISI 316 Stainless Steel backplate, Aluminum
or Carbon (optional)
- Traditional piston inflator
- Single inflator hose with pipe and inner metal wire
- 3 Over-pressure and exhaust valves
- Plate protection cover
- 4 Heavy duty Hypalon neoprene pockets (Option: fixed or removable)
- Quick connect LP hose
- Brackets for mono and double tank (optional)
Colour Options: Red, Black, Blue, Navy, Military Green, Yellow, White, Rescue Orange, Bordeaux
The best for CWD and Hazmat (hazardous materials) contaminated water and OTS operations.
Multi-layer polyurethane for fast decontamination, universal helmet collar, and steel-toe boots with stainless-steel sole.
Certified PPE for chemical and biological protection, both WITH and WITHOUT valves.
Made in Italy by DiveSystem
Fully CE certified as PPE Cat. III against chemical and biological agents with or without drysuit valves installed, ensuring complete regulatory compliance in every configuration.
Neck Dam compatibility with leading professional helmet makers (DRASS-Galeazzi, Kirby Morgan, Divex, etc.).
Supplied with polyurethane safety boots featuring a steel toe cap and stainless anti-penetration plate. Class: S5 CI SRC – EN 20345:2022.
CE-certified PPE Cat. III against chemical and biological agents, with or without drysuit valves.
Polyurethane / Nylon / Polyurethane multilayer fabric, resistant to chemical and biological agents:
Easy to clean and decontaminate.
Highest available abrasion resistance.
H.D. nylon core, tear- and puncture-resistant.
Taped welded seams inside and outside; designed with fewer seams to minimize weld points.
Reinforced knees (sealed double-layer polyurethane).
Latex neck seal as standard.
• User-replaceable SI-Tech neck seal (opt.)
• User-replaceable SI-Tech hood seal (opt.)
SI-Tech wrist ring as standard — user-replaceable SI-Tech wrist seals.
Contaminated Water Diving (CWD) valve setup with dual exhaust valves and a standard inflation valve.
Zipper: T-Zip (bronze on request).
Adjustable braces.
Included: LP inflation hose, drysuit carry bag.
Certifications
EN 14225 • EN 14126 • EN 14605 • EN 13034 • Cat. III
PPE Cat. III with or without valves
Material
Polyurethane / Nylon / Polyurethane multilayer
Outstanding abrasion, tear and puncture resistance
The 2+ is a simple, versatile thickness meter designed for “hands free” operation; the unit employs an end-mounted display and three distinct measuring modes to measure the wall thickness of a variety of metals of any level of corrosion and pitting. This meter can also be used on a wide range of engineering materials such as plastics/HDPE etc.
To compliment Cygnus' ultrasonic thickness gauges, Cygnus offers a range of ultrasonic transducers. The performance of any ultrasonic thickness gauge relies heavily on the transducer and its suitability to the material being measured. Therefore, selecting the right transducer is vital. All Cygnus’ transducers are made from stainless steel and have a hard wear face or a wear membrane to protect the transducer.
The Xstream 1st Stage Deep G5/8 in. regulator has a patented ruby ball seal that is automatically positioned by the floating seat which balances any upstream pressure equally with the pressure adjustment spring, maintaining the benefits of having a perfect ball as the sealing element. This makes the Xstream Range self-balancing, giving the same high performance, irrespective of the pressure in the cylinder. Added to this, the range has a built-in antifreeze protection in its construction. The TDA (Thermo Dynamic Antifreeze) ensures that the through-flowing water keeps the ice away, entirely without fluids or extra diaphragms.
Features
Patented ruby ball seal that is automatically positioned by the floating seat which balances any upstream pressure equally with the pressure adjustment spring, maintaining the benefits of having a perfect ball as the sealing element.
Self-balancing, giving the same high performance, irrespective of the pressure in the cylinder.
Range has a built-in antifreeze protection in its construction.
TDA (Thermo Dynamic Antifreeze) ensures that the through-flowing water keeps the ice away, entirely without fluids or extra diaphragms.
Specifications
Gases: Air, nitrox, trimix, and heliox
Connection: DIN G5/8 in.
Ports:
5 LP ports
2 HP ports
Flowrate (l/cu. ft. per min): 5500/194
Safety Valve: Yes
Separate Yoke: Accessory
Technique: Rolling diaphragm
Thermodynamic Anti-Freeze Protection: Yes
Valve Technique: Spheric
Wheel Mount: Side
Zytel HP Seat: Yes
Weight: 750 g
Material: Chrome plated brass construction
The Outland Technology UWL-400 LED Light is a low voltage LED light 24 VDC 36 watt, (equivalent to 300 watt halogen) which has a 1920 lux at 1 meter output. The LED light has a life of 50,000 hours, and has a depth range of 4000 ft. (1200 meters).
Features:
50,000 hr. life LED
Equivalent to 300 watt Halogen
Can Operate in Water or Air
24 VDC, 36 Watts
Specifications:
Mechanical:
Measurements: 2.5 in. Dia. x 4.6 in. L
Depth rating: 4000 ft. (1200 meters)
Weight in Air: 10.7 oz. (0.30 kg)
Weight in Seawater: 4.3 oz. (0.12 kg)
Housing Material: 6061 T6 hard coat anodized aluminum
Port Material: Acrylic
Electrical:
Input Voltage: 24 VDC 36 watt
Power: 36 Watts (Equivalent to 300 watt halogen)
Light Properties:
Light Output: 2200 lux @ 1 meter (5000 lumens; equivalent to 300 watts halogen)
Color Temperature: 3000 K
Beam Angle: 100 degrees
Connector:
Power (+)
Ground / Common
0-24 VDC Control
MS3108B-18-08P Includes
Right angle 8-pin MS-style connector shell with clamp*
*Note: This item is no longer sold with a bushing. Bushings may be purchased separately depending on the size of your video cable. Bushings are used to reduce friction and provide strain-relief, wear and tear to the cable.
There are three recommended Bushing options
P/N: MS-3420-8 - Bushing for cables up to .437 in. diameter (recommended for use with Outland C-2300 video cable).
P/N: MS-3420-10 - Bushing for cables up to .562 in. diameter.
P/N: MS-3420-6 - Bushing for cables up to .312 in. diameter (needs to be purchased with the MS-3420-8 bushing for nesting and proper fitting inside the MS3108B-18-08P shell and clamp).
Outland Technology's UWC-330 Underwater Dive Camera, the HD version of a diver's favorite. This high-definition (1080P) fixed-focus camera is specifically crafted for underwater exploration, delivering exceptional clarity and reliability.
Choose between the lightweight delrin housing for optimal maneuverability or the durable stainless steel housing for maximum protection in challenging conditions. The UWC-330's fixed-focus lens eliminates the need for constant adjustments, allowing divers to focus on capturing the moment effortlessly.
Elegantly designed and housed in a rugged casing, the UWC-330 is the go-to dive camera for both professionals and enthusiasts. Dive into the depths with confidence, capturing the wonders of the underwater world in stunning detail. Outland Technology's UWC-330 Dive Camera – where HD meets durability for unparalleled underwater experiences.
Applications
Helmet mount
Manipulator arm (ROV)
Hand-held
Drop camera
Features
High definition
Durable, corrosion-free housing
Color
Compact size
Specifications
Body Materials:
Stainless Steel
Black Delrin
Video Formats:
NTSC (U.S.)
PAL (Europe & Asia)
Mechanical:
Diameter: 1.62 in. (41 mm)
Length (excluding connector): 5 in. (127 mm)
Weight in Air: 9.8 oz. (0.28 kg)
Weight in Seawater: 3.1 oz. (0.09 kg)
Depth Rating: 6560 ft. (2000 m)
Housing Material: Delrin
Port Material: Acrylic
Camera Properties:
Image Device: 1/2.7 in. 2MP CMOS (1933 H x 1088 V pixels)
Sensitivity: 1.3 lux @ F2.0
Resolution: Up to 1933x1088
Lens: 3.6 mm, F2.0
Focus: Fixed
Horizontal FOV (in water): 70 degrees
Standard Format: PAL
Electrical:
Input Voltage 12-24 VDC
Power 90 mA @ 12 VDC
Connector:
Standard Connector (included): OTI-XSK-5-BCL
Mate for Standard Connector (not included): RMK-5-FS
Locking Sleeve (not included): K-FLS-D
Note: This will not work with Standard Definition recorders or video systems. Currently limited to 150 m cable transmission or 300 m with post amp.
Explore the depths with Outland Technology's UWC-325 Dive Camera, a favored choice among divers. This underwater camera delivers stunning Standard Definition (SD) images at 480i resolution, capturing the beauty beneath the waves with ease. Its fixed focus ensures hassle-free operation, allowing you to focus on your underwater adventures.
Choose between the lightweight Delrin housing for optimal maneuverability or the durable stainless steel housing for maximum protection in challenging conditions. Distinguished by its sleek and durable housing, the UWC-325 Dive Camera is built to withstand the challenges of underwater environments. Whether you're navigating coral reefs or exploring dark caverns, this camera is your reliable companion for deep-sea exploration.
Choose the UWC-325 Camera by Outland Technology for a seamless blend of simplicity and reliability, ensuring an extraordinary underwater experience that's optimized for capturing and sharing your underwater adventures.
Features
Stainless steel or delrin housing options
Standard definition
Color
Compact size
Uses Include
Helmet mount
Manipulator arm
Hand-held
Drop camera
Specifications
Mechanical Specifications
Diameter: 1.62 in. (41 mm)
Length (Excluding Connector): 5 in. (127 mm)
Weight in Air (SS): 1.23 lbs. (0.56 kg)
Weight in Seawater (SS): 0.63 lbs. (0.28 kg)
Weight in Air (Plastic): 1.77 lbs. (0.24 kg)
Weight in Seawater (Plastic): 0.11 lbs. (0.05 kg)
Depth Rating: 6560 ft. (2000 m)
Housing Material: 316 stainless steel or delrin
Port Material: Acrylic (options available)
Camera Specifications
Image Device: .5 in. Sony sensor
Sensitivity (BW): 0.0008 lux
Sensitivity (Color): 0.017 lux
Resolution: SD 4:3
Focus: Fixed
Horizontal FOV (in Air): ~60°
Standard Format: NTSC
Signal Type: Composite analog
Electrical Specifications
Input Voltage: 10-24 VDC
Power: 135 mA (typical) @ 12 VDC
Connectors
Standard Connector: OTI-XSK-5-BCL
Mate for Standard Connector: OTI-RMK-5-FS
Options
1. PAL format
2. Port material
3. Housing material
Outland Technology Portable High Definition Dual Video and Light Console OTI-CON-3700. Its innovative design consolidates the Outland video and light system with the Amron communicator into a single, compact case, while continuing to provide industry-leading quality and reliability.
Features
Dual diver video and light control.
Built-in dual Amron communicator with speaker.
1080P high definition dual diver console.
Dual 0-100% variable lamp control.
Supports SD, HD, and Outland smart cameras.
Supports 2-wire and 4-wire dive communication.
Built-in 45 hr. battery backup for communicator and DVR with 1 TB hard drive.
Specifications
Weight: 35 lbs. (16 kg)
15 in. ~1600nit, 16:9 1080p sunlight readable HD LCD color with audio
Model CON-3700/D Console
Mechanical:
Size: 18.5 in. W x 14.5 in. D x 8 in. D (7.3 x 5.7 x 3.15 cm)
Weight: 35 lbs. (16 kg)
Electrical:
Input Voltage: 110-240 VAC; 50/60Hz
Power: 350 watts max
Light Supply: (2) 24VDC @ 1.85 A Max
Camera Supply: (2) 14.5 VDC @ .25 A Max
Cable Connectors: (2) MS3102-18-08S
Radio:
Radio Connections: (8) 5-way Binding Posts
Headset Connections: (6) Banana Jacks
External Battery Connection: (2) Tip Jacks
OPTIONS
Smart camera controller with dive timer (6200)
Amron deluxe headset with boom mic and dual banana plugs - P/N: 2401-28
DC Option (/DC) 300W pure sign wave inverter
DIVATOR FULL FACE MASK; EXCLUDING BREATHING VLV; SILICONE BLACK; HATCH 96319-XX
Features:
The Divator breathing valve is one of the best-tested valves available, performing well even in extreme conditions such as mud, oil, and fast flowing cold currents.
The breathing valve maintains extremely low breathing resistance at all diving depths, even if variations occur in the secondary pressure, enhancing diver performance and endurance.
The optional Safety Pressure is turned on automatically when the user takes his first breath in the mask, reducing the risk of inward leakage of water (or air at surface) and is very important when diving in contaminated water.
The inhalation channel features a one-way valve that prevents water from penetrating into the valve mechanism, reducing the risk of freezing and sticking in the open position.
Low volume visor reduces positive buoyancy generated from air inside the mask, improving underwater stability.
The inner mask design minimizes "dead space," reducing the chances of re-inhalation of carbon dioxide.
Equipped with a purge button on the breathing valve, making it easy to drain water from the mask.
Retainers for spectacle inserts and is prepared for underwater communication, enhancing divers' communication capabilities.
The airflow design of the mask considerably reduces turbulence noise, improving communication clarity underwater.
Rubber head harness with five straps that can be tightened and locked using stainless steel buckles, providing a secure and adjustable fit.
Optional Hatch feature designed to give the diver ambient air while on stand-by or at surface level; select under *Options.
Available with Safety Pressure or with Normal Pressure Breathing Valve, select under *Options.
Available in black or yellow silicone and black or gray natural rubber under *Options.
Specifications:
Approval: 89/686/EEC
Breathing Valve Connection: Bayonet
Breathing Hose Connection: M16 x 1 male
Dimensions:9.0 x 6.3 x 4.3 in. / 230 x 160 x 110 mm
Dimensions (packaging): 11.4 x 7.5 x 6.1 in. / 290 x 190 x 155 mm
Mask Material: Natural rubber or silicone
Visor Material: Polycarbonate
Medium Pressure: 5-11 bar / 72-160 psi
Standard: EN250
Standard (2): EN250 §5.12.3 cold water performance
Weight: 1.8 lbs./ 0.8 kg
Weight (packaging): 2.2 lbs. / 1.0 kg
The Amron International Model 3114 Talk Back Speaker is encased in a die-cast housing with a stainless steel front panel. Speaker is 8 watts, 8 ohms. Frequency Range: 250 Hz - 10,000 Hz. Input connection: 3 ft. SJO cable, 18 AWG. Housing is die-cast zinc with gray epoxy powder coat, with a 300 series stainless steel front panel.
DISCLAIMER NOTICE: Amron's communications equipment is designed to be used in air chambers where oxygen concentrations remain below 23.5%. Our communications products (including communicators, speakers, entertainment systems, and other communications accessory items) are NOT designed for oxygen service, are not intrinsically safe, and do not meet the criteria given in NFPA-99, Chapter 20 and other applicable definitions. Use of our products in high-concentration Oxygen environments may result in serious injury and/or death.
Specifications
8 Ω
Voice Range: 8 watts
Frequency Range: 250 Hz – 10,000 Hz
Input Connection: 3 ft. SJO cable, 18 AWG
Material:
Housing: Die-cast zinc with gray powder coat
Front Panel: 300 series stainless steel
Height: 4.25 in. (10.8 cm)
Width: 5.5 in. (14 cm)
Depth 2 in. (5.1 cm)
Weight: 5 lb. (2.3 kg)
Features
Touch switch with 6-level light intensity dimmer.
Long-lasting LED technology (50,000 hour life).
Frosted lens for diffuse lighting.
Compact, low profile design.
Mounting plate can be rotated to orient connector & switch.
Low heat, high-performance heat sink.
Vented design requires no pressure relief valve.
3-pin wiring (V+, V-, Safety GND).
3-pin Marsh Marine style connector (mates with RMG-3-FS).
Optional magnetic base (P/N: 540-0021-01).
Optional lens filters - Red (P/N: 245-0003-01) and Blue (P/N: 245-0004-01).
Dimensions
Height: 2.6 in. (67 mm)
Body Diameter: 3.3 in. (84 mm)
Mounting Plate: 4.5 in. dia. (114 mm)
Weight: 1.50 lbs. (0.68 kg)
Mounting Holes: 2x 0.25 in. (6.35 mm) dia. with 3.82 in. (97 mm) spacing
Electrical Specifications
Lamp Type: Bright white LED (5000K)
Operating Voltage Range: 9-28 VDC
Input Power: 15 watts (max.)
Beam Angle: 120°
Light Level: Adjustable - 1000 lumens (max.)
Electrical Connection
Male 3-Pin Marsh Marine (RMG-3-MP style equivalent)
Mating Connector / Cable Options:
RMG-3-FS Marsh Marine (not included)
WPC-3-FS-10 Low Smoke Zero Halogen Cable (not included)
Mating Connector Locking Sleeve Options:
Other Specifications
Lens: Borosilicate glass (frosted)
Housing: 6061 aluminum
Finish: Black hard anodized (MIL-A-8625, Type III Class 2)
Pressure Rating: 1000 FSW (300 MSW)
The Model H203-U Sound Powered Phone with unterminated coiled retractable cord provides safe, reliable transmission for chamber communications. The Model H203 Sound Powered Phone generates signal from sound waves, no electrical power required. Comes with 6 feet of extended coiled retractable cord.
Note: Phone cord and plate color/material are subject to change without notice.
Features:
Safe and reliable transmission for chamber communications
Generates signal from sound waves, no electrical power required
Specifications:
Height: 9 in. (22.8 cm)
Width: 2.30 in. (5.84 cm)
Depth: 4 in. (10.1 cm)
Coil Cable Length: 36 in. (91.44 cm)
Weight: 2 lbs. 6 oz. (21 kg)
FAQ's
Will the SPT-550RC Sound Powered Phone work with the model H203-XX Sound Powered Phone?
Yes.
Does the Sound Powered Phone have a ringer?
No.
What´s the difference between model SPT-550RC and this one ?
The H203-U is manufactured to be more durable and is heavier than the SPT-550RC.
Features
50,000 hours of LED life
Equivalent to 150 watt halogen
Can operate in water or air
Specifications
Mechanical:
Diameter: 1.62 in. (41 mm)
Length (Excluding Connector): 4 in. (102 mm)
Weight in Air: 7.7 oz. (0.22 kg)
Weight in Seawater: 2.8 oz. (0.08 kg)
Depth Rating: 6560 ft. (2000 m)
Housing Material: Anodized aluminum
Port Material: Acrylic
Electrical:
Input Voltage: 24 VDC 18 watt
Power: 20 watts
Light Properties:
Light Output: 960 lux @ 1 m (2150 lumens; equivalent to 150 watt halogen)
Color Temperature: 3000 K
Beam Angle: 100 degrees
Connectors:
Power (+)
Ground / Common
0-24 VDC Control
FAQ's
Can Outland Technology install another manufacturer’s connector on their cameras and/or lights?
Yes, they can install any connector you request as long as the connector will fit on the camera or light housing. You will also have to provide a wiring diagram for the new connector that will mate with the camera system you’re planning to use with the camera or light. There will be an additional cost as well.
RMG-4-FS In-Line Rubber Molded Connector - 4 female sockets with 24 in. pigtail of 18 AWG SJOOW cable. This Marsh Marine-style connector is intermateable between brands in this RMG-4 category.
Applications
Diver umbilical communications, underwater cameras, lighting systems, and instrumentation.
Specifications
Material: Special neoprene, molded
Contacts: Copper alloy-gold plated per ASTM-B-488
Voltage Rating: 300 VDC
Pressure Rating: Up to 20,000 PSI
Cable: 18/4 AWG SJOOW
Cable Length: 24 in.
FAQ's
Why is the SJO cable on the RMG-4-FS only rated to 300 volts when the other RMG connectors are rated to 600 volts?
Amron had to use a SJO cable with a thinner walled jacket to allow the cable to be used with the commercial diving helmet penetrator and diving umbilical.
After I solder my RMG waterproof connector to my umbilical, how do I waterproof the connection?
Amron recommends using an 82-F1 inline splice kit to waterproof your RMG to umbilical connection. We chose this resin because it’s semi-flexible and extremely durable in the harsh underwater environment.
Amron International's new 350M BIBS mask is the perfect combination of performance, durability and comfort. The Amron 350M BIBS Mask was specifically designed and tested to meet the rigorous Norsok U-101:1999 breathing standard. Unlike other BIBS on the market today, Amron's 350M BIBS Mask is built to withstand the extreme conditions found in a saturation diving environment.
The Amron 350M BIBS Mask demand regulator is fully adjustable to allow for easy breathing from surface decompression all the way down to 350 meters pressurized depth. Diver's comfort was a major consideration so the 350M BIBS Mask comes standard with a comfortable oral nasal and a supportive head strap.
For chamber depths over 99 feet of seawater, a secondary vacuum regulator must be installed (see Tescom Regulator (Part Number: 26-2912-282A). A hull-stop valve should be an integral part of the hyperbaric system; used as a safety device to shut down the vacuum should a pressure loss occur. The vacuum regulator allows the exhaled gases to be carried to the outside of the chamber thereby eliminating oxygen buildup or contamination of the chamber environment
Features
Third party tested to Norsok U-101:1999.
Easy breathing (light inhalation and exhalation resistance, resulting in a low work of breathing).
Rugged regulator housing with stainless steel valve assemblies.
Tool-less removal of demand and exhaust valve assemblies for ease of maintenance and service.
Pneumatically balanced demand regulator with fine tune adjustment.
Pneumatically balanced exhaust regulator with overboard dump, permits minimum ventilation of the chamber.
Vacuum relief valve included.
Gas router and CO2 purge mechanism attached to the valves.
Double diaphragm design with removable diaphragms and locking diaphragm covers for proper alignment and compression.
Ultrafit, hi-comfort silicone oral nasal, designed to fit most faces and designed to accommodate a microphone option.
Full head harness for added comfort during long administration.
Pressure and collapse tested 10 ft. hose assembly with quick disconnects included.
For use with Air, Oxygen, or Heliox.
A unique microphone (P/N: 550-0010-01) can be linked to an Amcom ™ series communicator, allowing the person inside the chamber to clearly communicate with people outside the chamber.
US Patent No. 8,336,547
Int. PCT. Pat. No. US2012/066144
350M BIBS Mask - P/N: 350M-01 Includes:
(1) 10 Foot Hose Assembly - P/N: 540-0004-01
(1) Oxygen Cleaned Quick Disconnect Socket - Brass - P/N: 59853-00
(1) Oxygen Cleaned Quick Disconnect Socket - P/N: 18969-00
(1) 350M BIBS Mask User's Manual - P/N: 350M-UM
(1) Certificate of Conformance
Amron Low-Pressure Hose Assembly for AGA Divator MK II Full Face Mask - 30 in. 5/16 in. ID Hose LP5-AGAF-O2M-30
Application
Low pressure hose assembly to be used in conjunction with the AGA Divator MK II Full Face Mask and umbilical with female O2 fitting.
Specifications
Hose Type: Low pressure hose 30 in. 5/16 in. ID
Working Pressure: 400 PSI / 27.6 bar
Minimum Burst Pressure: 2000 PSI / 137.9 bar
Listed on the SEA 00C3 Authorization for Navy Use (ANU) Program list,
Category 2.2.9 MK 20 Umbilical to Mask Hose Assembly
Fittings
AGA Divator MK II Full Face Mask female swivel fitting with o-ring.
9/16-18 Male O2 swivel fitting connects with umbilical O2 fitting.
Made from brass, plated with Hi-phosphorus electroless nickel or copper, nickel, chrome.
Tests
Tested to EN250: 2014 standards.
Certificate available upon request.
The FAK376 Commercial Diver DMAC15 (Diving Medical Advisory Committee) First Aid Kit is one of the largest and most comprehensive kits for commercial dive operations. This kit is so extensive, it’s practically a portable hospital.
The Commercial Diver DMAC First Aid Kit is compliant with the standards set by DMAC (Diving Medical Advisory Committee) associated with IMCA (International Marine Contractors Association), while also meeting those set by the ADCI (Association of Diving Contractors International), USCG (United States Coast Guard), OSHA (Occupational Safety and Health Administration), and USACE (United States Army Corps of Engineers), and is approved for use in hyperbaric/decompression chambers.
This FAK376 kit is broken out into three separate kits (Diving Bell First Aid Kit, Hyperbaric Rescue Unit or HRU First Aid Kit, and Medical First Aid Kit), each utilizing a Seahorse© hard case. Each kit is available on its own, but when these kits are combined (the DMAC), they create the ultimate medical resource for any commercial dive operations, no matter how remote.
NOTE: The end user must provide vessel registration documentation and the name of the medical director and medical technician on board the vessel for prescriptions.
OTI-UWS-3510
This is a single diver high definition HD (1080p) camera system. The CON-3500 console is the same as the high-end dual diver system but includes a single camera, light, cable, and bracket.
Features
Complete single diver HD video system
Compact HD camera
LED light, 2500 lumens
1 TB HDD DVR with built-in overlay
Backwards compatible with older SD cameras
Standard System Includes
1 UWC-330/P: HD 1080p camera
1 ea. UWL-401: LED light
1 ea. DHM-60: Bracket
1 ea. C-2303: 500 ft. cable
CON-3500/D: 16:9 HD monitor (15 in.), HDD recorder, power supply with variable light control
All mounted in a weather-resistant shipping case
Camera Model: UWC-330/P Specifications
Camera Properties:
Image Device: .5 in. Sony sensor
Sensitivity: 0.017 lux
Resolution: 1080p
Lens: 3.6 mm, F2.0
Focus: Fixed
Horizontal FOV (in Water): ~ 80°
Standard Form: NTSC
Mechanical:
Diameter: 1.62 in. (41 mm)
Length (Excluding Connector): 5 in. (127 mm)
Weight Air: 0.63 lbs. (0.28 kg)
Weight in Seawater: 3.1 oz. (0.09 kg)
Depth Rating: 6560 ft. (2000 m)
Housing Material: Delrin
Port Material: Acrylic
Light Model: UWL-401 Specifications
Mechanical:
Weight Air: 0.48 lbs. (0.22 kg)
Weight in Seawater: 0.18 lbs. (0.08 kg)
Depth Rating: 6,560 ft. (2000 m)
Housing Material: Anodized aluminum
Electrical:
Input Voltage: 24 VDC
Power: 20 watts
Light Properties:
Light Output: 1,100 lux @ 1 m (2,500 lumens) @ 3000 K
Cable Model: C-2303 Specifications
Mechanical:
Length: 500 ft. (150 m) standard
Diameter: 0.35 in. (8.9 mm)
Jacket: Polyurethane (orange)
Breaking Strength: 1,200 lbs. (540 kg)
Electrical:
Conductors: 16 ea. #22 awg; 1 RG-59 coax
Console Model: CON-3500/D Specifications
Mechanical:
Size: 18.5 in. W x 14.5 in. D x 6 in. H (7.3 cm x 5.7 cm x 2.36 cm)
Weight: 25 lbs. (11.8 kg)
Electrical:
Power: 110-240 VAC; 50/60 Hz.; 350 W max
Light Control: Variable control 0 - 100%.
Monitor: 15 in. ~ 1600 nit, 16:9 HD LCD color w/audio
Safety: Low voltage output to diver
Connections: Front panel connections for umbilicals
Recorder: High definition 1 TB HDD DVR
Options
Camera:
Stainless steel camera housing (UWC-330/SS)
PAL video format (/E)
Optional connectors
Cable:
User-specified cable lengths:
Standard Lengths:
330 ft.
500 ft.
C-2304 cable (replaceable whip at dive)
Bracket: HM-300 helmet mount
Light: UWL-400 LED light 2,200 lux @ 1m (5,000 lumens) @ 3000 K 36 watts
Console:
Smart camera controller with dive timer (6200)
DC option (/DC) 300W true sign wave inverter
Hydraulics International 5G-SD-60 Booster Pump is a Single Action, Double Drive, Single Stage Booster Pump with 9,000 psi Max Outlet Pressure and 200 psi Min Inlet Pressure both based on 95 psi Drive.
An air (or gas) driven gas booster has a continuously reciprocating drive that includes a four-way air cycling valve and dual air pilot valves to provide the continuous reciprocation. Normally, start/stop control is accomplished by cutting off drive- or pilotair input. The drive section includes a four-way air cycling valve and dual air pilot valves to provide the continuous reciprocation. Normally, start/stop control is accomplished by cutting off drive- or pilotair input.
The Maximum Gas Section Pressures vary by model. The Maximum Drive Section Pressure is 150 PSI for all models.
GAS PURITY: Most gases used in industry and life support must be clean and dry. Otherwise, the end use is severely compromised. Gases needing purity include argon (Ar), carbon dioxide (CO2), helium (He), hydrogen (H2), neon (Ne), nitrogen (N2), nitrous oxide (N2O), oxygen (O2) and breathing air. If gas purity is needed, all devices used to transfer gas or increase gas pressure must be completely dry and free of any lubricants. Hydraulics International, Inc.’s (HII’s) air driven gas boosters satisfy this requirement. No hydrocarbon lubrication is needed in the gas sections because the high pressure pistons slide on inert PTFE dynamic seals. And because gas barrel temperature is controlled with the cold drive air exhaust, long seal life is ensured.
HIGH PRESSURE OUTLET: Most mechanically driven gas compressors can only handle 5,000- to 6,000-PSI requirements. Mechanically driven units that can handle over 6,000 PSI are rare and costly. If gas purity is required, most of these higher-PSI units need high-pressure and high-maintenance purifiers installed—to compensate for hydrocarbon carryover created by oil-lubricated pistons. Air driven gas boosters do not suffer from these shortcomings and are therefore better suited for higher-PSI applications. HII’s standard air driven models are hydrocarbon-free and available in 50- to 25,000-PSI capacities.
BOOST DIRECTLY FROM HIGH PRESSURE GAS CYLINDERS: A mechanical compressor cannot inhale common industrial gas cylinder pressure. The inlet pressure must be reduced, usually close to 0 PSI. This is a costly waste of energy. Air driven gas boosters have no such limitation, greatly enhancing the efficiency and simplicity of high pressure gas applications where the gas source is typically supplied from portable DOT cylinders.
Hydraulics International Air Driven Gas Booster is designed to boost gas directly from a cascade system, a gas generation system, a cryogenic system or a high pressure compressor to outlet pressures of 3,450 psi (238 bar). The unit ensures full fills even if the supply storage pressure drops as low as 300 psi (20 bar). The unit may be driven manually, by means of its integral hand pump assembly (optional); a low pressure conventional air compressor; or regulated high-pressure air storage supply (SCUBA, SCBA or NITROGEN bottles). There is a maximum of 150 psi (10 bar) air supply.
The high-pressure sections of the booster are cooled by the drive exhaust air and operate dry, non-lubricated. In the shop air drive mode, non-contaminated outlet gas is assured because of complete dual vented separation from the drive section.
This Air Driven Gas Booster is ideal for general aviation, municipal fire, rescue, recreational and technical divers, dive shops, yachts and rescue services.
Hydraulics International 5G-SS-75 Booster Pump is a Single Action, Single Drive, Single Stage Booster Pump with 7,000 psi Max Outlet Pressure and 500 psi Min Inlet Pressure both based on 95 psi Drive.
An air (or gas) driven gas booster has a continuously reciprocating drive piston section directly connected to one or two gas boosting sections. The drive section includes a four-way air cycling valve and dual air pilot valves to provide the continuous reciprocation. Normally, start/stop control is accomplished by cutting off drive- or pilotair input.
The Maximum Gas Section Pressures vary by model. The Maximum Drive Section Pressure is 150 PSI for all models.
GAS PURITY: Most gases used in industry and life support must be clean and dry. Otherwise, the end use is severely compromised. Gases needing purity include argon (Ar), carbon dioxide (CO2), helium (He), hydrogen (H2), neon (Ne), nitrogen (N2), nitrous oxide (N2O), oxygen (O2) and breathing air. If gas purity is needed, all devices used to transfer gas or increase gas pressure must be completely dry and free of any lubricants. Hydraulics International, Inc.’s (HII’s) air driven gas boosters satisfy this requirement. No hydrocarbon lubrication is needed in the gas sections because the high pressure pistons slide on inert PTFE dynamic seals. And because gas barrel temperature is controlled with the cold drive air exhaust, long seal life is ensured.
HIGH PRESSURE OUTLET: Most mechanically driven gas compressors can only handle 5,000- to 6,000-PSI requirements. Mechanically driven units that can handle over 6,000 PSI are rare and costly. If gas purity is required, most of these higher-PSI units need high-pressure and high-maintenance purifiers installed—to compensate for hydrocarbon carryover created by oil-lubricated pistons. Air driven gas boosters do not suffer from these shortcomings and are therefore better suited for higher-PSI applications. HII’s standard air driven models are hydrocarbon-free and available in 50- to 25,000-PSI capacities.
BOOST DIRECTLY FROM HIGH PRESSURE GAS CYLINDERS: A mechanical compressor cannot inhale common industrial gas cylinder pressure. The inlet pressure must be reduced, usually close to 0 PSI. This is a costly waste of energy. Air driven gas boosters have no such limitation, greatly enhancing the efficiency and simplicity of high pressure gas applications where the gas source is typically supplied from portable DOT cylinders.
Hydraulics International 5G-TD-28/60 Booster Pump is a Two Stage, Double Drive Booster Pump with 10,875 psi Max Outlet Pressure and 120 psi Min Inlet Pressure both based on 95 psi Drive.
An air (or gas) driven gas booster has a continuously reciprocating drive piston section directly connected to one or two gas boosting sections. The drive section includes a four-way air cycling valve and dual air pilot valves to provide the continuous reciprocation. Normally, start/stop control is accomplished by cutting off drive- or pilotair input.
The Maximum Gas Section Pressures vary by model. The Maximum Drive Section Pressure is 150 PSI for all models.
GAS PURITY: Most gases used in industry and life support must be clean and dry. Otherwise, the end use is severely compromised. Gases needing purity include argon (Ar), carbon dioxide (CO2), helium (He), hydrogen (H2), neon (Ne), nitrogen (N2), nitrous oxide (N2O), oxygen (O2) and breathing air. If gas purity is needed, all devices used to transfer gas or increase gas pressure must be completely dry and free of any lubricants. Hydraulics International, Inc.’s (HII’s) air driven gas boosters satisfy this requirement. No hydrocarbon lubrication is needed in the gas sections because the high pressure pistons slide on inert PTFE dynamic seals. And because gas barrel temperature is controlled with the cold drive air exhaust, long seal life is ensured.
HIGH PRESSURE OUTLET: Most mechanically driven gas compressors can only handle 5,000- to 6,000-PSI requirements. Mechanically driven units that can handle over 6,000 PSI are rare and costly. If gas purity is required, most of these higher-PSI units need high-pressure and high-maintenance purifiers installed—to compensate for hydrocarbon carryover created by oil-lubricated pistons. Air driven gas boosters do not suffer from these shortcomings and are therefore better suited for higher-PSI applications. HII’s standard air driven models are hydrocarbon-free and available in 50- to 25,000-PSI capacities.
BOOST DIRECTLY FROM HIGH PRESSURE GAS CYLINDERS: A mechanical compressor cannot inhale common industrial gas cylinder pressure. The inlet pressure must be reduced, usually close to 0 PSI. This is a costly waste of energy. Air driven gas boosters have no such limitation, greatly enhancing the efficiency and simplicity of high pressure gas applications where the gas source is typically supplied from portable DOT cylinders.
Hydraulics International 5G-TS-14/30 Booster Pump is a Two Stage, Single Drive Booster Pump with 8,435 psi Max Outlet Pressure and 60 psi Min Inlet Pressure both based on 95 psi Drive.
An air (or gas) driven gas booster has a continuously reciprocating drive piston section directly connected to one or two gas boosting sections. The drive section includes a four-way air cycling valve and dual air pilot valves to provide the continuous reciprocation. Normally, start/stop control is accomplished by cutting off drive- or pilotair input.
The Maximum Gas Section Pressures vary by model. The Maximum Drive Section Pressure is 150 PSI for all models.
GAS PURITY: Most gases used in industry and life support must be clean and dry. Otherwise, the end use is severely compromised. Gases needing purity include argon (Ar), carbon dioxide (CO2), helium (He), hydrogen (H2), neon (Ne), nitrogen (N2), nitrous oxide (N2O), oxygen (O2) and breathing air. If gas purity is needed, all devices used to transfer gas or increase gas pressure must be completely dry and free of any lubricants. Hydraulics International, Inc.’s (HII’s) air driven gas boosters satisfy this requirement. No hydrocarbon lubrication is needed in the gas sections because the high pressure pistons slide on inert PTFE dynamic seals. And because gas barrel temperature is controlled with the cold drive air exhaust, long seal life is ensured.
HIGH PRESSURE OUTLET: Most mechanically driven gas compressors can only handle 5,000- to 6,000-PSI requirements. Mechanically driven units that can handle over 6,000 PSI are rare and costly. If gas purity is required, most of these higher-PSI units need high-pressure and high-maintenance purifiers installed—to compensate for hydrocarbon carryover created by oil-lubricated pistons. Air driven gas boosters do not suffer from these shortcomings and are therefore better suited for higher-PSI applications. HII’s standard air driven models are hydrocarbon-free and available in 50- to 25,000-PSI capacities.
BOOST DIRECTLY FROM HIGH PRESSURE GAS CYLINDERS: A mechanical compressor cannot inhale common industrial gas cylinder pressure. The inlet pressure must be reduced, usually close to 0 PSI. This is a costly waste of energy. Air driven gas boosters have no such limitation, greatly enhancing the efficiency and simplicity of high pressure gas applications where the gas source is typically supplied from portable DOT cylinders.
*Note: This Booster Pump is not O2 cleaned, if O2 option is required please talk to Left Surface Representatives
Specifications
Materials:
O-Ring: Viton®
Body: Naval brass
Temperature: −20° F to +400° F (-29°C to +204°C)
Valve Size: ⅜ in.
Inlet Connections: Male pipe & lockwire
Set Pressure: 300 psi
This valve has been tested in accordance with procedures in Paragraph UG 131, Section V111 of the ASME Unified Pressure Vessel Code: ASME Certificate of Authorization, Number 4599. This valve is not certified for steam or liquid service and is intended for air service applications only.
IMPORTANT: The ASME requires that valves be set at a “pop point." The ASME refers to this as the set pressure. This point is higher than the traditional Circle Seal Controls definition of cracking pressure.
NOTE: After a prolonged period of storage with no system pressure, this relief valve will evidence an apparent high set pressure on first pop; therefore, in receiving inspection tests, true set pressure should be determined after first pop.
FOR YOUR SAFETY: It is solely the responsibility of the system designer and user to select products suitable for their specific application requirements and to ensure proper installation, operation, and maintenance of these products. Material compatibility, product ratings, and application details should be considered in the selection. Improper selection or use of products described herein can cause personal injury or property damage.
Specifications
Accuracy: 0.25% full scale (calibration certification included)
Product Type: Pneumo depth gauge
Dial Size: 6 in. (external zero adjust included)
Pointer Type: Test (knife-edged, precision reading)
Mirror Band: Yes
Pointer Dampening: Yes
External Zero Adjust: Yes
Pressure Range: 250 FSW / 76 MSW
Color: Black
Dial Trim Material: Stainless steel
Fitting Position: Rear
Fitting Type: 1/4 in. NPT
Front flange
The TESCOM 44-2200 Series is a compact, lightweight high purity single-stage regulator for specialty, flammable, and industrial gas flows of less than 5 SCFM / 141 SLPM. Its diffusion-resistant metal diaphragm seal ensures gas purity and integrity.
Applications
Laboratory and point-of-use gas systems
Sampling systems, zero, span, and calibration analyzer gases
Specialty and industrial gas cylinder regulator
Chromatograph flame detector fuel supply
Features
Compact size.
Designed to reduce contamination and provide accurate regulation of any corrosive, non-corrosive, or toxic gas.
Brass model provides added economy for control of non-corrosive media.
Metal to metal diaphragm to body seal assures minimum inboard and outboard leakage.
Convoluted diaphragm gives excellent accuracy and long life.
Panel mounting available.
NACE compliant designs are available upon request and at an additional cost.
Regulator incorporates an adjustable stop which allows the maximum outlet pressure to be limited to any value between the maximum rated value and 50% of the maximum rated value.
Specifications
Body Material: Brass
Outlet Pressure Range: 0-500 psig / 0-34.5 bar
Maximum Inlet Pressure and Flow Capacity: 3500 psig / 241 bar Inlet: Cv = 0.06
3500 psig inlet models have 1/4 in. NPTF Inlet and Outlet Gauge Ports
Valve Inlet & Outlet Port Size: 1/4 in. NPTF
Design Proof Pressure: 150% maximum rated
Leakage:
Internal: Bubble-tight
External: Design to meet ≤ 2 x 10-8 atm cc/sec He
Operating Temperature: -40°F to 165°F / -40°C to 74°C
Maximum Operating Torque: 30 in-lbs. / 3.4 N∙m
Diaphragm: 316 Stainless Steel, Elgiloy®
Seat: Teflon®
Internal Volume: 6 cc
Weight (without gauges): 2 lbs. / 0.9 kg
CAUTION: This product is cleaned in accordance with the intermediate level of ASTM-G93 and CGA-4.1 (The intermediate level assures removal of visible particles and combustible residues). System designers must verify the compatibility of the materials used in this product before installation and operation. Specification of materials for oxygen service is the user's responsibility. Consult an expert.
Specifications
Series: F
Material: Brass
Thread Size: 3/8 in. MNPT
Socket Size: 3/8 in.
Maximum Operating Pressure: 3,000 PSI
Seal Material: BUNA
Oxygen Cleaned IAW MIL-STD-1330 & CGA G4.1
Compatible with
Dummy Plug for Exhaust Quick Disconnect, Brass - P/N: B-6QDP
BIBS Brass Manifold, 4-Port, with 1/4 in. & 3/8 in. MNPT Plugs - P/N: 8000-004
BIBS Brass Manifold, 2-Port, with 1/4 in. & 3/8 in. MNPT Plugs - P/N: 8000-002
Exhaust Hose Plug, 3/8 in. Barb x 3/8 in. Plug, Brass - P/N: 59852-00
Hose Clamp, 3/16 in. Stainless Steel - P/N: MLT2S-CP
FAQ's
Is this the female quick disconnect that is used with the Amron and Avox BIBS Masks?
Yes.
What size is the thread on the 59853-00 quick disconnect?
3/8 inch NPT.
What is the maximum pressure for P.N. 59853-00 Oxygen Cleaned Quick Disconnect Socket - Brass?
2,700 PSI
The Amron International 8000-004 Chamber BIBS Manifold Block was designed to operate with up to four Oxygen BIBS Masks. The BIBS Manifold Block is made of high quality brass and has a working pressure up to 1800 PSI. For systems that require more than four masks, multiple manifolds can be installed in series. The manifold is supplied with a 1/4 in. and 3/8 in. female NPT plug.
Features
Designed to operate with up to four Oxygen BIBS Masks.
Includes 4 supply ports and 4 exhaust ports for a maximum of 4 Oxygen BIBS Masks with overboard discharge.
Unit is supplied with 1/4 in. and 3/8 in. Female NPT plugs (qty. 4 each plug size).
Specifications
Maximum Working Pressure: 1800 PSI
Supply Ports: 1/8 in. Female NPT (4)
Exhaust Ports: 3/8 in. Female NPT (4)
Manifold Supply Connection: 1/4 in. Female NPT
Manifold Exhaust Connection: 3/8 in. Female NPT
Supply Passage Inside Diameter: 0.422 in.
Exhaust Passage Inside Diameter: 0.562 in.
Mounting Holes: 1/4-20 UNC-2B (2)
Dimensions:
Height: 2.5 in. (6.4 cm)
Width: 7.88 in. (20 cm)
Height: 1.25 in. (3.2 cm)
Weight: 6.25 lbs. (2.8 kg)
Enclosure: Brass
Note: For requirements of more than 4 masks, the manifolds can be installed in series.
FAQ's
Is the BIBS Manifold Block oxygen clean?
No. However, if you require the BIBS Manifold Block to be oxygen cleaned, please contact your Left Surface representative for a written quote.
What is the safe working pressure for the BIBS Manifold Block?
1800 PSI
What is the threaded hole in the center of my Chamber BIBS Manifold Block used for?
This is an accessory mounting hole used to attach the lanyard from the B-6QDP Brass Plug to the Chamber BIBS Manifold Block. The threaded hole accepts a 6-32 UNC screw.
The Amron International 18969-00 Oxygen Cleaned Quick Disconnect Socket is designed for Oxygen use in a hyperbaric environment. The fitting incorporates a self-sealing feature for the purpose of automatically shutting off the flow of gas when disconnected from its mating half.
Specifications
Quick Disconnect Socket Size: 1/4 in. (female)
Thread Size: 1/8 in. MNPT
Oxygen cleaned & packaged
Working Pressure: 300 PSI
Materials:
Brass body and valve
Stainless steel spring and locking balls
Color Coded: Green for Oxygen service
FAQ's
Is this the female quick disconnect that is used with the Amron and Avox BIBS Masks?
Yes.
What size is the thread on this quick disconnect?
1/8 inch NPT.
Specifications
Type: 5-contact female socket on one end
Cable: 24 in. pigtail 5-conductor 18 AWG SOOW cable
Material: Neoprene rubber
Contacts: Gold-plated
Voltage Rating: 600 VDC-contact factory for higher voltage requirements
Pressure Rating, Mated: Up to 20,000 psi (1370 bar = 13,700 m water depth)
Mates With: RMK-5-MP, RMK-5-MPD, RMK-5-MPD-HP, XSK-5-BCL, RMK-5-BCL
Locking Sleeves: Female K-FLS-D, Male K-MLS-D (purchased separately)
Larger profile than RMG and VMG
The RMG-3-MP In-Line Rubber Molded Connector - 3 Pin Male with 18 SO AWG Cable. Other typical uses are for underwater cameras, lighting systems, instrumentation.
Applications
Underwater cameras, lighting systems and instrumentation.
Specifications
Material: Special neoprene, molded
Contacts: Copper alloy-gold plated per ASTM-B-488
Voltage Rating: 600 VDC
Pressure Rating: Up to 20,000 PSI
Cable: 18/3 AWG SO
Cable: 24 in.
The RMG Dummy Connectors are manufactured in both Low Pressure (LP) and High Pressure (HP). Instead of a cable, it is solid rubber on the end (about 3 in. long rubber).
Features
Standard rubber molded dummy connector
Mated Pressure Rating: 20,000 psi (male pin contact required) or < 4,000 PSI (male pin contact not required)
Female socket
Number of Contacts: 3
Mates with: RMG-3-MP and XSG-3-BCL
Locking Sleeve: G-FLS-D
Specifications
Material: Special neoprene, molded
Voltage Rating: 600 VDC-contact factory for higher voltage requirements
RMG-3-FS In-Line Rubber Molded Connector - 3 Socket Female with 18/3 SOOW cable. This Marsh Marine style connector is inter-mateable between brands in this RMG-3 category.
Applications
Underwater cameras, lighting systems, and instrumentation.
Specifications
Material: Special neoprene, molded
Contacts: Copper alloy-gold plated per ASTM-B-488
Voltage Rating: 600 VDC
Pressure Rating: Up to 20,000 PSI
Cable: 18/3 AWG SOOW
Cable Length: 24 in.
Mating Connectors: RMG-3-MP, RMG-3-MPD (dummy), RMG-3-BCL (bulkhead)
Locking Sleeves: G-FLS-D (delrin), G-FLS-S (stainless steel)
Amron 5/16 in. ID Low Pressure Breathing Air Hose for Divers with Customizable Diver and Supply Fittings - Price per Inch
Applications
Diving
Low pressure air breathing hose assemblies
Bailout whips
Emergency gas supply hose (EGS)
Specifications
Hose Type: Low pressure hose, 5/16 in. ID
Working Pressure: 400 PSI / 27.6 bar
Minimum Burst Pressure: 2000 PSI / 137.9 bar
Nominal Bore: 0.290 in. to 0.330 in. / 7.37 mm to 8.38 mm
Outside Diameter: 0.540 in. to 0.566 in. / 13.72 mm to 14.38 mm
Temperature Range: -40°F to +190°F / -40°C to +88°C
Weight: 9.6 lbs. per 100 ft. of hose
Standard Color: Black
Hose Construction
Tube: Black odorless nitrile rubber
Reinforcement: Single braid synthetic yarn
Cover: Black neoprene rubber
Fittings
Fitting Types:
9/16-18 female swivel X 5/16 barb
AGA female swivel X 5/16 barb
1/4 male NPT X 5/16 barb
3/8-24 male X 5/16 barb
Oxygen male x 5/16 barb
Made from brass
Plated with hi-phosphorus electroless nickel OR copper, nickel, chrome
RMG-4-MP In-Line Rubber Molded Connector - 4 Pin Male connector
Applications
A male connector is typically installed on helmets/masks and mates with a female connector on a diver communications cable/umbilical.
Underwater cameras, lighting systems, and instrumentation.
Specifications
Material: Special neoprene, molded
Contacts: Copper alloy gold-plated per ASTM-B-488
Voltage Rating: 300 VDC
Pressure Rating: Up to 20,000 PSI
Cable: 18/4 AWG SJOOW
Pigtail Length: 24 in.
Locking Sleeve: G-MLS-D (Delrin®) or G-MLS-S (stainless steel)
FAQ's
Why is the SJO cable on the RMG-4-MP only rated to 300 volts when the other RMG connectors are rated to 600 volts?
Amron had to use a SJO cable with a thinner walled jacket to allow the cable to be used with the commercial diving helmet penetrator.
DISCLAIMER NOTICE: Left Surface reserves the option to supply this style from multiple manufacturers. If you prefer a particular manufacturer, please let your salesperson know before ordering.
The 44-1300 Series Regulator is a spring-loaded, hand-operated, pressure-reducing regulator with an integral self-relieving vent valve.
Applications
Commercial diving - breathing air
Special gas mix regulation hard suit diving
High-pressure tube trailer gas reduction
Features
A large piston sensor gives excellent sensitivity.
Balanced valve design ensures stable downstream pressure.
A large hand knob provides fast, low-torque pressure settings.
This model is venting.
This model is modified to have a left-hand inlet with 1/4-inch NPT gauge ports at 60°.
Dome and air-loaded models are available (non-venting only).
Flanged end connections are available.
Notes
For extended temperatures from -40°F to 400°F/-40°C to 204°C, consult Amron or Tescom.
A secondary pressure drop due to the outlet-cross-hole can significantly affect the rated flow capacity. Flow curves should be used for critical sizing applications. See the Resources tab for more information.
Interspiro Service Kit for Divator Breathing Valve with Safety Pressure 460-190-904
InterspiroService Kit for Divator Breathing Valve with Safety Pressure includes:
(1) Diaphragm unit MK II P/N: 336-190-360
(1) Valve insert Sub Assembly without Safety Pressure P/N:97083-51
(1) Non Return Valve Assembly P/N: 460-190-559
(1) O-Ring POS 7 P/N: 346-190-198
(1) O-Ring POS 6 P/N: 99486-01
(1) O-Ring POS 5 P/N: 331-900-064
(1) O-Ring POS 10 P/N: 336-900-008
(1) Lever Assembly P/N: 336-190-142
Interspiro Service Kit for Divator Breathing Valve with Safety Pressure supports the following:
Divator MK II Full Face Mask with Positive Pressure Regulator - Silicone - Yellow P/N: 96319-02
Divator MK II Full Face Mask with Positive Pressure Regulator - Natural Rubber - Grey P/N: 96319-04
Divator MK II Full Face Mask with Positive Pressure Regulator - Silicone - Black P/N: 96319-06
Divator Mask Si Hatch with Safety Pressure, Breathing Valve Included - Yellow P/N: 96319-15
Divator Valve Housing with Positive Pressure - Black P/N: 336-101-158
Divator Cover with Purge Button - Black P/N: 460-190-518
This service part kit is intended for component-level maintenance of the DIVATOR Full Face Mask. The service part kit contains the required soft rubber parts that are listed on the Specs tab. The replacement of the parts shall be done according to the instructions in the DIVATOR Service and Repair manual for the DIVATOR Full Face Mask unit - IS-document # 30 930 - Divator service and repair manual.
NOTE: Service on the Divator Full Face Mask and Breathing Valve shall only be carried out by a qualified service technician carrying a valid Interspiro service certificate.
This service part kit is intended for component-level maintenance of the DIVATOR Full Face Mask. The service part kit contains the required soft rubber parts that are listed below. The replacement of the parts shall be done according to the instructions in the DIVATOR Service and Repair manual for the DIVATOR Full Face Mask unit - IS-document # 30 930 - Divator service and repair manual.
Service Part Kit for Divator Mask (460-200-503) - Breathing Valve Includes
Non-return valve disc - 2 x P/N: 331-100-791
O-ring for the cover - 1 x P/N: 944-610-221
O-ring lever assembly (to be used for safety pressure and octopus valve only) - 1 x P/N: 336-900-001
Non-return valve assembly - 1 x P/N: 336-190-332
*O-ring mask connection -1 x P/N: 336-900-008
Sealing sleeve - 1 x P/N: 336-100-019
O-ring, inner - 1 x P/N: 331-900-064
O-ring, outer - 1 x P/N: 99-486-01
Balancing diaphragm - 1 x P/N: 331-100-641
Valve cone assembly - 1 x P/N: 336-190-064
Exhalation diaphragm, natural rubber (as per product bulletin 30417A01, January 2009) - 1 x P/N: 30-005-01
Diaphragm - 1 x P/N: 336-100-009
O-ring - 1 x P/N: 336-900-009
O-ring - 1 x P/N: 944-610-206
O-ring (for regulator hose 3/8" fitting) - 1 x P/N: 336-900-099
*WARNING: This O-ring must not be fitted to a breathing valve with a mouthpiece.
Interspiro Service Kit for Divator Breathing Valve without Safety Pressure 460-190-902
Interspiro Service Kit for Divator Breathing Valve without Safety Pressure includes:
(1) Diaphragm unit MK II P/N: 336-190-360
(1) Valve insert Sub Assembly without Safety Pressure P/N: 97083-51
(1) Non Return Valve Assembly P/N: 460-190-559
(1) O-Ring POS 7 P/N: 346-190-198
(1) O-Ring POS 6 P/N: 99486-01
(1) O-Ring POS 5 P/N: 331-900-064
(1) O-Ring POS 10 P/N: 336-900-008
Interspiro Service Kit for Divator Breathing Valve without Safety Pressure supports the following:
Divator MK II Full Face Mask with Demand Regulator - Silicone - Black P/N: 96319-05
Divator MK II Full Face Mask with Demand Regulator - Silicone - Yellow P/N: 96319-01
Divator MK II Full Face Mask with Demand Regulator PR - Silicone - Black P/N: OTS-900157-008
Divator Breathing Valve Assembly w/o Positive Pressure - Black P/N: 336-101-150
The TESCOM 44-1100 series high-pressure, low-flow venting regulator offers a piston-sensed design, control pressures of 0-6,000 psig / 0-414 bar, a low torque setting, and a large hand knob. Multiple pressure range kits are available.
Applications
Ground support equipment (GSE)
Support pressure panels
Aircraft charging carts
Calibration equipment
R & D laboratories
Features
Removable valve assembly module permits easy repair
Excellent sensitivity through a wide range of pressure settings
Piston style sensor offers extra safety and reliability
Unbalanced stem assists positive shut-off
Inlet and outlet gauge ports standard
Venting is standard
Regulator vents to zero psig/bar in all pressure ranges
TESCOM Pressure Reducing Regulator Brass, Inlet 3750 PSIG, Outlet 600 PSIG, 3/4 NPTF, Cv 2, Venting w/ Gauge Ports
The 44-1300 Series Regulator is a spring-loaded, hand-operated, pressure-reducing regulator with an integral self-relieving vent valve.
Applications
Commercial diving - breathing air
Special gas mix regulation hard suit diving
High-pressure tube trailer gas reduction
Features
A large piston sensor gives excellent sensitivity.
Balanced valve design ensures stable downstream pressure.
A large hand knob provides fast, low-torque pressure settings.
This model is venting.
This model is modified to have a left-hand inlet with 1/4-inch NPT gauge ports at 60°.
Dome and air-loaded models are available (non-venting only).
Flanged end connections are available.
Notes
For extended temperatures from -40°F to 400°F/-40°C to 204°C, consult Amron or Tescom.
A secondary pressure drop due to the outlet-cross-hole can significantly affect the rated flow capacity. Flow curves should be used for critical sizing applications. See the Resources tab for more information.
Specifications
Dimensions:
7.5 in. x 50 ft.
7.5 in. x 100 ft.
Max Umbilical Inside Diameter: 1.75 in.
2 in. velcro edge closure and end snaps
Fits:
Standard 3-part diving umbilical (air, pneumo, and comms)
Standard 4-part diving umbilical with hot water hose (air, pneumo, comms, and hot water)
5-part diving umbilical with max inside diameter of 1.75 in.
Material: Vinyl coated fabric, UV and mildew resistant
Colors:
Green
Red
Yellow
Note: If you have a 5-Part Diving Umbilical, you will need to confirm your umbilical diameter does not exceed 1.75 in. This umbilical sheath has been confirmed to fit a standard 3-Part Diving Umbilical (Air, Pneumo, and Comms) and 4-Part Diving Umbilical with Hot Water Hose (Air, Pneumo, Comms, and Hot Water).
The Dräger DiveSorb® Pro was developed specifically for closed or semi-closed rebreathers in order to allow a high degree of CO2 absorption, and thus long dive times. ANU Approved
Dräger DiveSorb® Pro Carbon Dioxide Absorbents 16.8 kg - 37 lb Canister 0099-LL-HOC-4490
Application:
The absorbent is perfectly aligned for modern diving apparatus and is suitable for demanding usage.
DiveSorb® Pro is highly resistant to abrasion, therefore levels of dust formation are very low.
Features:
The unique mispherical pill shape of the absorbent ensures low respiratory resistance and long life cycles.
Specifications:
Composition: Calcium hydroxide, Alkali hydroxide, Water
Shape: Hemispherical pellet
Grain size: Ø approx. 4 mm, ISO 3310, 2 - 4 mm, ASTM E11, 5 to 10 No
Water content: (16 +/- 2) %
Density: 875+/-125 g/L
CO2 absorption capacity: Depending on the operation parameters and the absorption system
Storage temperature: -30°C to +50°C
Shelf life after production: 5 years
Indicator: No color indicator
Weight: 16.8 kg - 37 lb
Features
Rugged, flexible and long-lasting.
Resistant to abrasion and kinking.
Buoyant in seawater and freshwater.
Clean and odor-free hoses.
Spiral wound elements.
3-Part Umbilical-Air, Pneumo, and Comms with Strength Element Includes
Length: 330 ft.
3-Part spiral wound umbilical - air, pneumo, and comms/strength
Oxygen fittings installed on both ends of the diver's hose and surface end of the pneumo hose.
4-pin female waterproof connector installed on the diver's end of the comm cable.
U.S. Navy 5-pin male MS connector on the surface end of the comm cable.
Snap shackle (MWL 2980 lb. / BL 5950 lb.) with welded D-ring installed on diver end, seized 48 in. from the umbilical end.
D-ring installed on the surface end, seized 10 ft. from the umbilical end.
Brass tag showing manufacturing and testing information.
Fully tested, includes testing certification.
The Amron International 8330iC-01 Three Diver High/Low Pressure Air Control, with Depth Monitoring and a Communicator is a portable, self-contained system for surface supplied commercial diving operations.
This system is specifically designed with three independent diver channels that are compliant with the International Marine Contractors Association (IMCA) guidelines - IMCA D023 DESIGN for Surface Oriented Air Systems.
The Model 8330iC-01 is housed in a durable, pressure-fused fiberglass case that provides a convenient, compact, rugged and professional system.
The system comes standard with a field proven AMCOM III Series Communicator that is a full-featured three-diver communicator with independent microphone and earphone volume controls for the tender and each diver. The communicator can operate in both 4-wire (full duplex) or 2-wire modes. The communicator has a built-in internal charger and can be operated using 90-264 VAC, an internal 12 VDC battery, or an external 12 VDC power source.
The Amron International Model 8211-01 Compact Two Diver Air Control Surface Command Unit (SCU) is ergonomically designed with the customer in mind. The 8211-01 is a compact, portable and affordable 2-diver Surface Command Unit that uses the high quality 2825A-07 AMCOM™ II 2-Diver Deluxe Communicator.
This Surface Command Unit is a self-contained high and low pressure air control and depth monitoring (pneumo) system for surface supplied commercial diving operations.
Easy set-up of high pressure or low pressure air sources greatly extends search and rescue diving capabilities. To use the Amron AMCOMMAND™ II with 4500 PSIG inlet air supply, simply change the yoke assembly to the SAA-5300 DIN Adapter 300 Bar.
The system comes standard with the field proven 2825A-07 AMCOM™ II 2-Diver Deluxe Communicator that is a full-featured, hard-wired two-diver communicator with independent microphone and earphone volume controls for the tender and each diver. It can be operated in both 2-Wire and/or Full Duplex (4-Wire) communication modes. Different modes can be used simultaneously. The communicator has a built-in internal charger and can be operated using a 90-264 VAC, internal 12 VDC battery, or an external 12 VDC power source.
It is manufactured with Amron’s high quality standards and over 40 years of experience in the diving industry. Ideal for the inland diver, but rugged enough for the offshore diver, the 8211-01 is a great Surface Command Unit for either application.
WARNING: DO NOT USE THE AMRON 8211-01 FOR THE FOLLOWING:
Mixed gas diving operations with an oxygen level greater than 25%.
Oxygen or oxygen enriched breathing mixtures above 25%.
3/4 IN #12 JIC HOSE FITTING
Applications:
#12 JIC Hose fitting for 3/4 inch I.D. Cortland Fibrolite and Fibroflex Umbilical Hoses
Specifications:
Hose Details:
Bore (ID): 3/4 inch
Hose Type: Fibrolite, Fibroline and Fibroflex
Hose Fitting: #12 JIC
Part Number: FBL12
O.D.: 30.60 MM
Max Working Pressure: 500 PSI
Ferrule O.D.:
Body Material: Swageable Phosphor-Bronze
Pre Crimp: 39.60 mm
Post Crimp: 33.20 CDD ± 0.20 mm
Cortland 1/2 inch #8 JIC Hose Fitting Swagable Phosphor - Bronze
The Fibroline (FBL series) and Fibrolite (FLT series) pneumo, gas and hot water hoses have an extruded polyurethane final finish (Fibroline with a thicker cover for greater robustness). These are typically used in surface demand / air dive applications.
Applications:
#8 JIC Hose fitting for 1/2 inch I.D. Cortland Fibrolite and Fibroflex Umbilical Hoses
Specifications:
Hose Details:
Body Material: Swagable Phosphor - Bronze
Bore: 1/2 inch
Hose Type: Fibrolite and Fibroflex
Hose Fitting: #6 JIC
Part Number: FLT06R*
O.D.: 18.50 mm
Max Working Pressure: 400 PSI
Ferrule O.D.:
Pre Crimp: 25.40 mm
Post Crimp: 20.00 CDD ± 0.20 mm
Note: Crimp down diameters (CDD) are for Cortland phosphor bronze hose end fittings for the Cortland ranges of diving hoses.
Fibron 1/2 inch #8 JIC Hose Fitting Swagable Phosphor - Bronze
The Fibrolite (FLT series) pneumo, gas and hot water hoses have an extruded polyurethane final finish (Fibroline with a thicker cover for greater robustness). These are typically used in surface demand / air dive applications.
Applications:
#8 JIC Hose fitting for 1/2 inch I.D. Fibron Fibrolite Umbilical Hoses
Specifications:
Hose Details:
Body Material: Swagable Phosphor - Bronze
Bore: 1/2 inch
Hose Type: Fibrolite
Hose Fitting: #8 JIC
Part Number: FLT08
O.D.: 18.50 mm
Max Working Pressure: 400 PSI
Ferrule O.D.:
Pre Crimp: 25.40 mm
Post Crimp: 22.00 CDD ± 0.20 mm
Note: Crimp down diameters (CDD) are for Fibron phosphor bronze hose end fittings for the Fibron ranges of diving hoses.
Fibron 1/4 inch Oxygen Hose Fitting Swagable Phosphor - Bronze
The Fibroflex pneumo, gas and hot water hoses (FDH series), light-weight collapse and recover (C/R) reclaim (FRH series) and non-collapse reclaim hoses (FXH series), all have a fibre braided final finish. These are typically used in both main services umbilicals and bell excursion umbilicals.
Applications:
Oxygen Hose fitting for 1/4 inch ID Fibron Fibrolite and Fibroflex Umbilical Hoses
Specifications:
Hose Details:
Body Material: Swagable Phosphor - Bronze
Bore: 1/4 inch
Hose Type: Fibroflex and Fibrolite
Hose Fitting: Oxygen
Part Number: FDH04
O.D.: 11.90 mm
Max Working Pressure: 1000 PSI
Ferrule O.D.:
Pre Swage: 19.00 mm
Post Swage: 15.85 CDD ± 0.15 mm
Note: Crimp down diameters (CDD) are for Fibron phosphor bronze hose end fittings for the Fibron ranges of diving hoses.
Fibron 3/8 inch #6 JIC Hose Fitting Swageable Phosphor-Bronze
Applications:
#6 JIC Hose fitting for 3/8 inch I.D. Fibron Fibrolite and Fibroflex Umbilical Hoses
Specifications:
Hose Details:
Bore (ID): 3/8 inch
Hose Type: Fibrolite, Fibroline and Fibroflex
Hose Fitting: #6 JIC
Part Number: FLT06/R - Fibrolite, FBL06 - Fibroline and FDH06 - Fibroflex
D.: FLT06/R - 17.50 mm, FBL06 - 18.50 mm FDH06 - 18.25 mm
Max Working Pressure: FLT06/R - 500 PSI, FBL06 - 500 PSI and 1000 PSI
Ferrule O.D.:
Body Material: Swageable Phosphor-Bronze
Pre Swage: 25.4 mm
Post Swage: FLT06/R - 21.5 CDD ± 0.20 mm, FBL06 - 23.0 CDD ± 0.20 mm and FDH06 - 21.8 CDD ± 0.15 mm
Note:
Crimp down diameters (CDD) are for Fibron phosphor bronze hose end fittings for the Fibron ranges of diving hoses.
FLT06R has a thicker sheath than FLT06 and associated larger OD. This became Fibrolite standard in Aug 2004.
Fibron 1/4 inch #4 JIC Hose Fitting Swagable Phosphor - Bronze
The Fibroline (FBL series) and Fibrolite (FLT series) pneumo, gas and hot water hoses have an extruded polyurethane final finish (Fibroline with a thicker cover for greater robustness). These are typically used in surface demand / air dive applications.
Applications:
#4 JIC Hose fitting for 1/4 inch I.D.Fibron Fibrolite and Fibroflex Umbilical Hoses
Specifications:
Hose Details:
Body Material: Swagable Phosphor - Bronze
Bore: 1/4 inch
Hose Type: Fibrolite or Fibriflex
Hose Fitting: #4 JIC
Part Number: FLT04
O.D.: 11.50 mm
Max Working Pressure: 400 PSI
Ferrule O.D.:
Pre Crimp: 19.00 mm
Post Crimp: 16.00 CDD ± 0.20 mm
Note: Crimp down diameters (CDD) are for Fibron phosphor bronze hose end fittings for the Fibron ranges of diving hoses.
Fibron 3/8 inch Oxygen Hose Fitting Swageable Phosphor-Bronze
Applications:
Oxygen Hose fitting for 3/8 inch ID Fibron Fibrolite, Fibroline and Fibroflex Umbilical Hoses
Specifications:
Hose Details:
Bore (ID): 3/8 inch
Hose Type: Fibrolite, Fibroline and Fibroflex
Hose Fitting: Oxygen
Part Number: FLT06/R - Fibrolite, FBL06 - Fibroline and FDH06 - Fibroflex
O.D.: FLT06/R - 17.50 mm, FBL06 - 18.50 mm FDH06 - 18.25 mm
Max Working Pressure: FLT06/R - 500 PSI, FBL06 - 500 PSI and 1000 PSI
Ferrule O.D.:
Body Material: Swageable Phosphor-Bronze
Pre Swage: 25.4 mm
Post Swage: FLT06/R - 21.5 CDD ± 0.20 mm, FBL06 - 23.0 CDD ± 0.20 mm and FDH06 - 21.8 CDD ± 0.15 mm
Note:
Crimp down diameters (CDD) are for Fibron phosphor bronze hose end fittings for the Fibron ranges of diving hoses
FLT06R has a thicker sheath than FLT06 and associated larger OD. This became Fibrolite standard in Aug 2004.
Note: Australian Standards AS2299.1 3.13.6 requires that the minimum breaking strength of any potential load bearing component of a diver’s umbilical or lifeline shall be at least 6kn (600kg). This umbilical meets that standard.
Application (All members are spiraled together):
DC0671 - Surface dive umbilicals for communication.
FBL04P - Pneumo hose
FBL06G - Hose delivers gas for the diver to breathe underwater.
Note: Fittings and terminations are not included
Featured:
Fibrolite hoses with optimized outer covers for air end use – for standard arduous worksites requiring normal abrasion.
High kink, abrasion and fatigue resistance
Custom-built and extremely flexible
Lightweight with balanced load distribution
Rope-like construction for easy handling and storage
Inherent strength braid in communications cable - no need for a dedicated rope
Color coding for different services
3 Part umbilical-Air, Pneumo and Comms/Strength Includes:
DC0671 Reinforced Two Pair Communication Cable Specifications:
Two each individually screen 0.5 mm2 plain copper twisted pairs
Screens comprise polyester/aluminium laminate tape and tinned copper drain wire
Fiber filler element
Vectran fiber braid
Solid filled polyurethane sheath with 1.7 mm nominal thickness
Standard Color: Red
FBL04P - 1/4 Inch NB Fibroline Pneumo Hose Specifications:
Hose Type: Fibrolite
Max Working Pressure: 500 PSI / 35 bar
Minimum Burst Pressure: 2500 PSI / 172 bar
Nominal Bore: 1/4 inch / 6.35 mm
Outside Diameter: 12.5 mm
Minimum Bend Radius (Operational): 82 mm
Weight in Air: 101 kg/km
Weight in Sea Water: -25 kg/km
Standard Color: Yellow
FBL06G - 3/8 Inch NB Fibroline Gas Hose Specifications:
Hose Type: Fibrolite
Max Working Pressure: 500 PSI / 35 bar
Minimum Burst Pressure: 4000 PSI / 276 bar
Nominal Bore: 3/8 inch / 9.53 mm
Outside Diameter: 18.5 mm
Minimum Bend Radius (Operational): 121 mm
Weight in Air: 227 kg/km
Weight in Sea Water: -49 kg/km
Standard Color: Blue
Note: Umbilical lengths are subject to +/- 2% over/under to the quoted length.
Note: Fittings and terminations are not included
Application (All members are spiraled together):
DCS0001 - Surface dive umbilicals for communication.
FLT04 - Hose delivers air to measure the diver's depth underwater.
FLT06 - Hose delivers air for the diver to breathe underwater.
C-2300C - Outland Video Cable
FLT08 - Hot Water Hose delivers heated water from the surface to the diver
Featured:
Tough, kink and abrasion resistant
Buoyant in sea and fresh water
Clean and odor free
Flexible and non-aging
5 Part umbilical-Air, Pneumo, Comms/Strength and Video/Light Includes:
DCS0001 Communication Cable Specifications:
Screened Pairs: 2 x 0.5 mm2
Polyester Strength Braid: 500 kg minimum break strength
Red polyurethane outer sheath: 1.7 mm nominal thickness
Weight in Air: 120 kg/km
Weight in Sea Water: 25 kg/km
O.D. mm: 11.0 mm
Standard Color: Red
FLT04 - 1/4 Inch Pneumo Hose Specifications:
Hose Type: Fibrolite
Max Working Pressure: 400 PSI / 27.5 bar
Minimum Burst Pressure: 1600 PSI / 110 bar
Nominal Bore: 1/4 inch / 6.3 mm
Outside Diameter: 11.5 mm
Weight in Air: 82 kg/km
Weight in Sea Water: -25 kg/km
Minimum Bend Radius (Static): 75 mm
Minimum Bend Radius (Dynamic): 115 mm
Tensile Rating: 100 kg
Standard Color: Yellow
FLT06 - 3/8 Inch Breathing Air Hose Specifications:
Hose Type: Fibrolite
Max Working Pressure: 500 PSI / 35 bar
Minimum Burst Pressure: 2000 PSI / 140 bar
Nominal Bore: 3/8 inch / 9.5 mm
Outside Diameter: 17.5 mm
Weight in Air: 193 kg/km
Weight in Sea Water: -53 kg/km
Minimum Bend Radius (Static): 105 mm
Minimum Bend Radius (Dynamic): 1160 mm
Tensile Rating: 100 kg
Standard Color: Blue
C-2300C - Outland Video Cable Specifications:
Small, rugged, “Orange cable”.
Replaces the C-1500, C-2000, C-2300 and C5500 cables.
Braided Kevlar strength member (1200 lbs)
Lengths to 3000 ft.
Material: Orange Polyurethane jacket.
Temp. rating -40 to +90C.
Diameter .380 inch
38 lbs.(17.5 kg) per 500 ft.
Conductors: 16 #22 awg and 1 mini RG-59 coax.
300 volt rated conductors.
FLT08 - 1/2 Inch Hot Water Hose Specifications:
Hose Type: Fibrolite
Max Working Pressure: 400 PSI / 27.5 bar
Minimum Burst Pressure: 1600 PSI / 110 bar
Nominal Bore: 1/2 inch / 12/.5 mm
Outside Diameter: 18.5 mm
Weight in Air: 167 kg/km
Weight in Sea Water: -109 kg/km
Minimum Bend Radius (Static): 120 mm
Minimum Bend Radius (Dynamic): 185 mm
Tensile Rating: 100 kg
Standard Color: Red
Note: Umbilical lengths are subject to +/- 2% over/under to the quoted length.
Note: Australian Standards AS2299.1 3.13.6 requires that the minimum breaking strain of any potential load bearing component of a diver’s umbilical or lifeline shall be at least 6kn (600kg). This umbilical does not meet that standard. Please contact your Amron sales representative for an alternate spiral umbilical that can meet this standard.
Note: Fittings and terminations are not included
Fibron 4 Part Umbilical that includes 1/4 in. Pneumo Hose, 3/8 inch Breathing Air Hose, Communications Cable and Video/Light Cable
Note: Fittings and terminations are not included
Application (All members are spiraled together):
DCS0001 - Surface dive umbilicals for communication.
FLT04 - Hose delivers air to measure the diver's depth underwater.
FLT06 - Hose delivers air for the diver to breathe underwater.
C-2300C - Outland Video Cable
Featured:
Tough, kink and abrasion resistant
Buoyant in sea and fresh water
Clean and odor free
Flexible and non-aging
4 Part umbilical-Air, Pneumo, Comms/Strength and Video/Light Includes:
DCS0001 Communication Cable Specifications:
Screened Pairs: 2 x 0.5 mm2
Polyester Strength Braid: 500 kg minimum break strength
Red polyurethane outer sheath: 1.7 mm nominal thickness
Weight in Air: 120 kg/km
Weight in Sea Water: 25 kg/km
O.D. mm: 11.0 mm
Standard Color: Red
FLT04 - 1/4 Inch Pneumo Hose Specifications:
Hose Type: Fibrolite
Max Working Pressure: 400 PSI / 27.5 bar
Minimum Burst Pressure: 1600 PSI / 110 bar
Nominal Bore: 1/4 inch / 6.3 mm
Outside Diameter: 11.5 mm
Weight in Air: 82 kg/km
Weight in Sea Water: -25 kg/km
Minimum Bend Radius (Static): 75 mm
Minimum Bend Radius (Dynamic): 115 mm
Tensile Rating: 100 kg
Standard Color: Yellow
FLT06 - 3/8 Inch Breathing Air Hose Specifications:
Hose Type: Fibrolite
Max Working Pressure: 500 PSI / 35 bar
Minimum Burst Pressure: 2000 PSI / 140 bar
Nominal Bore: 3/8 inch / 9.5 mm
Outside Diameter: 17.5 mm
Weight in Air: 193 kg/km
Weight in Sea Water: -53 kg/km
Minimum Bend Radius (Static): 105 mm
Minimum Bend Radius (Dynamic): 1160 mm
Tensile Rating: 100 kg
Standard Color: Blue
C-2300C - Outland Video Cable Specifications:
Small, rugged, “Orange cable”.
Replaces the C-1500, C-2000, C-2300 and C5500 cables.
Braided Kevlar strength member (1200 lbs)
Lengths to 3000 ft.
Material: Orange Polyurethane jacket.
Temp. rating -40 to +90C.
Diameter .380 inch
38 lbs.(17.5 kg) per 500 ft.
Conductors: 16 #22 awg and 1 mini RG-59 coax.
300 volt rated conductors.
Please see Product Ordering Information below.
The unique materials and cabled 'ropelike' construction combine to produce the most flexible, neutrally buoyant umbilicals available today. With no need to tape, much reduced repairs and longer life.
Unlike rubber or PVC compounds used in some commercial diving hoses, Fibron uses a particularly clean unfilled polymer containing no plasticizers or potentially harmful additives. This ensures breathing air gas quality is maintained under all conditions from -40°C to 60°C. Fibron diving umbilical hoses will not deteriorate significantly with age and remain flexible and abrasion resistant, thereby easily outlasting rubber and PVC type hoses.
Diving umbilicals in long, continuous lengths can be delivered. Standard lengths are 305m (1,000 ft.). Longer lengths are available upon request. The rugged abrasion resistant construction of Fibron diving umbilicals is ideal for surface supplied diving and can be incorporated with various electrical cables for compact, flexible diving umbilicals that are neutral or float in seawater.
Spiraling of diving umbilicals produces a unified flexible structure that allows components to realign when flexed, minimizing stresses induced by bending. No individual component is always on the inside or outside of the bend. This ensures the diving umbilicals are neither compressed nor stretched.
Note: Fittings and terminations are not included
Note: Umbilical lengths are subject to +/- 2% over/under to the quoted length.
Note: Australian Standards AS2299.1 3.13.6 requires that the minimum breaking strain of any potential load bearing component of a diver’s umbilical or lifeline shall be at least 6kn (600kg). This umbilical does not meet that standard. Please contact your Amron sales representative for an alternate spiral umbilical that can meet this standard.
FAQ's
All cables are sold with their connection?
No. The umbilical material pages listed on our website come un-terminated. Amron does list terminated umbilicals in limited configurations in the "Umbilicals" category of our web site. Also, if you wish to receive a price quote for terminated umbilicals, please request a price quote at https://www.amronintl.com/request-for-quote.
Hi,What is the hose made of? Thanks
Fibrolite Gas and hot water hoses : - Polyether based polyurethane liner - food grade. - 1 layer (all sizes) braided (open weave) polyester fibre reinforcement - Overall optimum polyurethane extruded cover
Fibron 3 Part Umbilical Material that includes 1/4 in. Pneumo Hose, 3/8 in. Breathing Air Hose and a Communications Cable.
Application (All members are spiraled together)
DCS0001 - Surface dive umbilicals for communication.
FLT04 - Hose delivers air to measure the diver's depth underwater.
FLT06 - Hose delivers air for the diver to breathe underwater.
Note: Fittings and terminations are not included
Amron sells many different diving umbilical configurations. Discounted umbilical material applies to continuous reel lengths of 2,001 feet./610 meters. If you don’t see the configuration you need, please contact us.
Featured
Tough, kink and abrasion resistant
Buoyant in sea and fresh water
Clean and odor free
Flexible and non-aging
3 Part umbilical-Air, Pneumo and Comms/Strength Includes
DCS0001 Communication Cable Specifications
Screened Pairs: 2 x 0.5 mm2
Polyester Strength Braid: 500 kg minimum break strength
Red polyurethane outer sheath: 1.7 mm nominal thickness
Weight in Air: 120 kg/km
Weight in Seawater: 25 kg/km
O.D. mm: 11.0 mm
Standard Color: Red
FLT04 - 1/4 Inch Pneumo Hose Specifications
Hose Type: Fibrolite
Max Working Pressure: 400 psi / 27.5 bar
Minimum Burst Pressure: 1600 psi / 110 bar
Outside Diameter: 11.5 mm
Weight in Air: 82 kg/km
Weight in Seawater: -25 kg/km
Minimum Bend Radius (Static): 75 mm
Minimum Bend Radius (Dynamic): 115 mm
Tensile Rating: 100 kg
Standard Color: Yellow
FLT06 - 3/8 Inch Breathing Air Hose Specifications
Max Working Pressure: 500 psi / 35 bar
Nominal Bore: 3/8 in. / 9.5 mm
Outside Diameter: 17.5 mm
Weight in Air: 193 kg/km
Weight in Seawater: -53 kg/km
Minimum Bend Radius (Static): 105 mm
Minimum Bend Radius (Dynamic): 1160 mm
Tensile Rating: 100 kg
Standard Color: Blue
Please see Product Ordering Information below.
The unique materials and cabled 'ropelike' construction combine to produce the most flexible, neutrally buoyant umbilicals available today. With no need to tape, reducing repairs and extending its life.
Unlike rubber or PVC compounds used in some commercial diving hoses, Fibron uses a particularly clean unfilled polymer containing no plasticizers or potentially harmful additives. This ensures breathing air gas quality is maintained under all conditions from -40°C to 60°C. Fibron diving umbilical hoses will not deteriorate significantly with age and remain flexible and abrasion resistant, thereby easily outlasting rubber and PVC type hoses.
Diving umbilicals in long, continuous lengths can be delivered. Standard lengths are 305m (1,000 ft.). Longer lengths are available upon request. The rugged abrasion resistant construction of Fibron diving umbilicals is ideal for surface supplied diving and can be incorporated with various electrical cables for compact, flexible diving umbilicals that are neutral or float in seawater.
Spiraling of diving umbilicals produces a unified flexible structure that allows components to realign when flexed, minimizing stresses induced by bending. No individual component is always on the inside or outside the bend. This ensures the diving umbilicals are neither compressed nor stretched.
Note: Umbilical lengths are subject to +/- 2% over/under to the quoted length.
Note: Australian Standards AS2299.1 3.13.6 requires that the minimum breaking strain of any potential load bearing component of a diver’s umbilical or lifeline shall be at least 6 kn (600 kg). This umbilical does not meet that standard. Please contact your Amron sales representative for an alternate spiral umbilical that can meet this standard.
The Amron International Model 2401-28 is a dual-sided medium-weight passive noise reduction deluxe headset with a dynamic noise-canceling boom microphone. This headset comes standard with a 6 ft. straight cord and Dual Banana Plugs that mates to all Amron series communicators. This headset has a superior noise reduction rating of 21 dB; suitable for use in a noisy environment. The 2401-28 features a unique, soft moleskin covered headband for all day comfort. The ergonomic headset design distributes ear cushion pressure evenly over the entire ear with no pressure points. Another great feature is that the headset folds into compact form for ease of transport and storage.
Features
Passive noise reduction deluxe headset.
Adjustable noise-canceling boom microphone can pivot up or down.
Adjustable soft moleskin covered headband for all day comfort.
Dual-sided ergonomic ear cushions distributes pressure evenly over the entire ear with no pressure points.
Built-in comfort for extended use.
6 ft. straight cord with dual banana plugs.
Headset folds into compact form for ease of transport and storage.
Custom length straight cords available.
Optional replacement ear cushions & ear cushion sock covers available.
How long is the spiral cord on the Amron Standard Headset?
The compressed cord is 20 inches long but can be stretched to roughly 8 ft.
DISCLAIMER NOTICE: Amron International’s communications equipment is designed to be used in air chambers where oxygen concentrations remain below 23.5%. Our communications products (including communicators, speakers, entertainment systems, and other communications accessory items) are NOT designed for oxygen service, are not intrinsically safe, and do not meet the criteria given in NFPA-99, Chapter 20 and other applicable definitions. Use of our products in high-concentration Oxygen environments may result in serious injury and/or death.
The Amron International Model 2401SM-28 is a single muff medium-weight passive noise reduction deluxe headset with a dynamic noise-canceling boom microphone. This headset comes standard with a 6-foot straight cord and dual banana plugs that mates to all Amron series communicators. This headset has a superior noise reduction rating of 21 dB suitable for use in a noisy environment. The 2401-28 features a unique, soft moleskin covered headband for all day comfort. The ergonomic headset design distributes ear cushion pressure evenly over the entire ear with no pressure points. Another great feature is that the headset folds into compact form for ease of transport and storage.
Features
Passive noise reduction deluxe headset.
Adjustable noise-canceling boom microphone can pivot up or down.
Adjustable soft moleskin covered headband for all day comfort.
Ergonomic single ear muff cushion distributes pressure evenly over the entire ear with no pressure points.
Built-in comfort for extended use.
6 ft. straight cord with dual banana plugs.
Headset folds into compact form for ease of transport and storage.
Custom length straight cords available.
Optional replacement ear cushion & ear cushion sock cover available.
DISCLAIMER NOTICE: Amron International’s communications equipment is designed to be used in air chambers where oxygen concentrations remain below 23.5%. Our communications products (including communicators, speakers, entertainment systems, and other communications accessory items) are NOT designed for oxygen service, are not intrinsically safe, and do not meet the criteria given in NFPA-99, Chapter 20 and other applicable definitions. Use of our products in high-concentration Oxygen environments may result in serious injury and/or death.
The Neptune III System includes the NEPTUNE III Integrated Diving Mask, a backpack, quick removal system, extender frame accessories, and a multi-tool.
Features
Includes:
NEPTUNE III Integrated Diving Mask
SL35TX INT 1st Stage Regulator
2nd Stage Regulator
Standard Hose
30 Features Backpack
QRS (Quick Removal System)
Surface Air Valve
Extender Frame Accessories
Doffing Handle
Multi-tool
Specifications
Size: Medium/Large
Color: Black
This communication unit is specifically designed to meet the needs of professional and commercial divers that cannot compromise on a full duplex, hands free, super clear communication system. Cable communication is still unequaled in quality, while needing a hard connection diver to surface.
Features
Hardwired, full duplex surface unit for underwater communications.
2 ports for 2 communication cables.
On/off and volume adjustment switches.
Microphone.
Switch for communication between surface & diver 1, surface & diver 2, surface & diver 1 & diver 2.
Headset port (headset optional).
External 12v power port (cable optional).
Battery charger port.
Audio/video recall.
Incorporated speaker.
12V rechargeable battery.
Underwater unit volume adjustment (for both divers).
Stand-by autonomy: 24h.
The OCEAN REEF GSM CUBE3 is an Underwater Communication Unit capable of operating wireless/hardwired or interfaced with a VHF radio - 3 units in one. If the unit is connected to the Alpha Pro X-DIVERS surface unit via a cable, then communication is in full duplex mode with the surface unit (no need to press the transceiver button to communicate). At the same time, the unit is capable of communicating with other wireless underwater units such as the OCEAN REEF GSM G.divers, GSM DC, GSM G-Power and GSM G-Power SL, M105 and M100 G.divers.
By pressing the button of the PTT, the unit is transmitting on channel 1 of ultrasonic frequency (channel 1 - 32.768 kHz). The GSM CUBE3 can be connected to a VHF radio through the waterproof carrying bag and other relevant connectors and interfaces. The GSM CUBE3 is equipped with a special plug for the six pin connector which can be used when you don't need to connect the cable. You can also connect and disconnect the unit to/from the cable while underwater.
Features
GSM Cube 3 Wireless Communication System
Underwater Communication Unit capable of operating wireless or hardwire or VHF.
Operating Modes:
Connected to an ALPHA PRO X-DIVERS surface unit by cable - Hardwire
Connected to a Gamma 105 surface unit - Wireless
Connected to the VHF system - Becomes a GSM-VHF
Can connect to other wireless systems transmitting on channel 1 – 32.768 kHz
Communicates with other wireless underwater units such as the OCEAN REEF GSM G.divers, GSM DC, GSM G-Power and GSM G-Power SL, M105 and M100 G.divers
Specifications
Rated Depth: 120 ft. (40 m)
Powered By: 9V alkaline battery
Color: Orange and black
Weight: 1.44 lb.
Sold Per Meter
OCEAN REEF's Professional Cable with Rope, Audio or Video is sold per meter and is available in any length. The professional cable includes a polyurethane jacket and yellow exterior rope to protect the cable from damage. The Professional Cable has a 900 lbs (4,000-newton resistance) breaking strength..
Specifications:
Materials: Polyurethane jacket and yellow exterior rope to protect the cable from damage
Strength: 900 lbs (4,000-newton resistance) breaking strength
Audio or Video is sold per meter and is available in any length
FAQ's
What is the wire gauge size for the Ocean Reef Professional Cable?
1x Micro-coaxial: Conductor 28AWG, Tinned copper braid coverage >90%
4x Conductor 25AWG
Amron Field Spares Kit for 28XXA-XX Communicators w/ Internal Power Supply
Amron 28XXA-FS-02 Field Spares Kit for 28XXA-XX Communicators Includes
(1) Toggle Switch – P/N: 7580K6
(1) Toggle Switch – P/N: 757-3522
(2) Yellow Push-To-Talk Buttons – P/N: PBSWITCH
(2) Knurled Thumb Screws (Brass) – P/N: 8-32X3/4KTSB
(1) Potentiometer 10K with Knob – P/N: P16NP-10K
(1) Tip Jack (Red) – P/N: 105-0602-001
(1) Tip Jack (Black) – P/N: 105-0603-001
(2) Banana Jacks (Red) – P/N: 1498-102
(2) Banana Jacks (Black) – P/N: 1498-103
(2) Banana Jacks (Yellow) – P/N: 1498-107
(2) Cooper Bussman Fuses, 4A/250V, Slo-Blo 5X20MM Glass Tube - P/N: 130-1002-01
(2) Toggle Switch Seal Half Boots (Grey) – P/N: 5168
(2) 5-Way Binding Posts (Black) – P/N: 14002B
(2) 5-Way Binding Posts (Red) – P/N: 14002R
(1) Fuses 3.15A/250V Micro Quick Acting – P/N: 0034.6019
(2) Mounting Clips for 5mm LED – P/N: LEDHOLDER-BLK.25
(1) LED Bi-Color Red/Green – P/N: LT2462-24-D51
(1) LED Bright Green – P/N: LEDGREEN
*NOTE: To be used with Power Supply - P/N: 190-0101-00.
Amron 12 VDC Sealed Lead Acid Rechargeable Battery with Slide terminals
Specifications
Standby Use:
Voltage Regulation: 13.6 -1 3.8v
Initial Current: 1.1A
Cyclic Use:
Voltage Regulation: 14.5 - 14.9v
Initial Current: 2.2A
Amron 12 VDC Sealed Lead Acid Rechargeable Battery with Slide terminals supports the following
AMCOM II - 2820A/24; 2820A-01; 2825A/24; 2825A-01; 2825A/24/26DSP3; 2825A-02
AMCOM II - 2825A/24/28FDW
AMCOM III - 2830A/24; 2830A-01; 2830A/24-MS; 2830A-05; 2830A/24/26DSP3; 2830A-02
AMCOM III - 2830A/24/26-MS; 2830A/24/28FDW
AMCOM III - 2830A/24/28FDW-MS
AMCOMMAND II - 8225-HP2
Note: Amron reserves the right to change the battery brand at any time without notice.
Amron Standard Operator Headset with Boom Mic and Dual Banana Plugs
Features
Adjustable boom microphone
Cushioned adjustable headband
Dual banana plugs
Ergo-formed ear cushions for extended use.
Coiled cord that extends up to 6 ft. overall length.
Custom length straight cords available.
Optional replacement ear cushions & ear cushion sock covers also available.
Specifications
Overall Length: 6 ft.
The Amron International Model 2460-28 is a dual-sided medium-weight headset with Dual Banana Plugs and coiled cord that extends up to 6 ft. The 2460-28 headset is designed for extended comfortable "full ear-cup" and features a unique heptagonal design that covers the ear naturally and completely. The ear cushions are not only wide and soft, but slightly thicker to the bottom and rear. Together, these "ergo-formed" shapes are the reason why the 2460-28 headset simply fits better!
DISCLAIMER NOTICE: Amron International’s communications equipment is designed to be used in air chambers where oxygen concentrations remain below 23.5%. Our communications products (including communicators, speakers, entertainment systems, and other communications accessory items) are NOT designed for oxygen service, are not intrinsically safe, and do not meet the criteria given in NFPA-99, Chapter 20 and other applicable definitions. Use of our products in high-concentration Oxygen environments may result in serious injury and/or death.
NEWLY DESIGNED ENHANCEMENTS
Low-impedance, balanced-line shock-mounted dynamic microphone provides an improved smooth, peak-free response and trouble-free performance.
Microphone housing is constructed of molded ABS plastic, which will withstand the day-to-day abuse of hand-held mobile microphone applications.
Features
Push-to-talk Switch is located on the microphone housing.
Output impedance is 200 ohms for matching low impedance input circuits.
Color-coded banana plugs mate directly to the color-coded inputs of all Amcom™ Communicators.
Amron 2830A-11 Three-Diver Rechargeable Portable Communicator with Outdoor AC Power Module and International Locking Power Cord
ENHANCEMENTS
High Audio Fidelity
Ultra-low noise circuit combined with noise suppression circuitry produces crystal clear speech. Automatic gain adjustment will guard audio signal from distortion, enhance speaker protection and audio quality. Increases band width 47%.
Extended Battery Operation Time
Audio amplifier card deploys the state-of-the-art Class-D digital audio power amplifier. Has very low power dissipation, produces less heat, and extends battery life up to 32%.
Flexible Gain Settings
The audio amplifier card has adjustable gain settings to accommodate different communication applications and environments.
Ultra-Low Electromagnetic Interference (EMI)
EMI is achieved through spread-spectrum and de-phase control techniques providing for optimum integration with diving systems.
Outdoor Rated AC Power Module
Weather resistant, IP65 rated AC power entry module accommodates country specific AC power cords.
Country Specific V-Lock AC Power Cord
At time of order, simply choose the IP54 rated Locking AC power cord you need.
FEATURES
Separate channels and volume controls for each diver and tender to accommodate individual earphone and microphone adjustments, equipment variations and individual comfort levels.
Divers’ umbilicals can be set to 4-wire mode (full duplex) or 2-wire mode (push-to-talk) or any combination of the two modes for any diver.
Ability to use both dynamic and pre-amplified diver microphones with a unique circuit that detects microphone type and automatically adjusts volume levels.
Weatherproof push-to-talk microphone for better voice intelligibility topside. For optimum clarity, see Tech Note (below) for other recommended equipment.
Internal charger allows for simultaneous charging and operation of the unit while protecting the rechargeable battery from being over-charged. Automatically supplies power to the audio amplifier when AC power is disconnected to allow for continued operation.
SPECIFICATIONS
Input Impedance (Each Input): 250 Ω
Frequency Response: 300–10000 Hz
Common Mode Rejection: 40 dB minimum
Current Drain Maximum Full Volume: 3 amps
Minimum Quiescent: 0.190 amps
Output Impedance: 4 Ω
Power Supply Voltage: 12 VDC nominal (9 volts minimum - 16 volts maximum)
AC Power Operating Range: 90-264 VAC, 50-60 Hz
Sensitivity (Input): 5 mV
Output Power (RMS @ 4 Ω load, 12 VDC): 10 watts audio
Battery Life: 41 hours
Dimensions: 10 in. H x 9 in. W x 14.5 in. L (25.4 cm x 22.9 cm x 36.8 cm)
Weight: 17.05 lbs. (7.73 kg)
INCLUDED WITH COMMUNICATOR
AMCOM™ III 2830A-11 Three-Diver Portable Communicator with AC Power, Internal Charger and Rechargeable Battery includes:
(1) Amron 2890-05 12 VDC Sealed Lead Acid Gel-Cell Rechargeable Battery with Slide terminals
(1) Amron 283XA-UM Three-Diver Portable Communicator User Manual
AVAILABLE OPTIONS
Amron 2821-28 Remote Walk-and-Talk (2-wire mode)
TECH NOTE: All communicators will inherently transfer topside noise to the divers when the tender speaks directly into the communicator’s panel speaker. To eliminate background noise at the surface, use the 2405-28 Push-to-Talk Microphone, included with this model. For optimum communications, we recommend purchasing the 2401-28 Deluxe Headset with Boom Mic, topside. For tender maneuverability, use the 2401-28 Deluxe Headset with Boom Mic along with the 2822-28 Remote Walk-and-Talk (4-wire mode) or the 2821-28 Remote Walk-and-Talk (2-wire mode). For wireless tender communications, order the 2825A-03 Three-Diver Deluxe Portable Communicator with built-in Wireless Tender option.
The AMCOM™ II 2825A-11 Two-Diver Deluxe Portable Communicator features separate channels and volume controls for each diver and the tender so that uplink and downlink paths can be customized for varying equipment configurations and individual comfort levels.
TECH NOTE: This newest version of the AMCOM™ II has the same versatile user-interface, rugged durability and great sound quality as its predecessor with separate channels and volume controls for both divers and the tender so uplink and downlink paths can be customized for various equipment configurations and individual comfort levels in addition to: (1) Inhalation Noise Reduction (INR); (2) Higher Audio Fidelity; (3) Automatic Gain Adjustment; (4) Extended Battery Life; (5) Flexible Gain Settings; (6) Ultra-Low Electromagnetic Interference (EMI); (7) Outdoor IP65 Rated AC Power Module and; (8) Customer’s Choice of Country-Specific V-Lock IP54 Rated AC Power Cord.
Amron 2825A-11 Two-Diver Rechargeable Portable Communicator with Outdoor AC Power Module and International Locking Power Cord
ENHANCEMENTS
High Audio Fidelity
Ultra-low noise circuit combined with noise suppression circuitry produces crystal clear speech. Automatic gain adjustment will guard audio signal from distortion, enhance speaker protection and audio quality. Increases band width 47%.
Extended Battery Operation Time
Audio amplifier card deploys the state-of-the-art Class-D digital audio power amplifier. Has very low power dissipation, produces less heat, and extends battery life up to 32%.
Flexible Gain Settings
The audio amplifier card has adjustable gain settings to accommodate different communication applications and environments.
Ultra-Low Electromagnetic Interference (EMI)
EMI is achieved through spread-spectrum and de-phase control techniques providing for optimum integration with diving systems.
Outdoor Rated AC Power Module
Weather resistant, IP65 rated AC power entry module accommodates country specific AC power cords.
Country Specific V-Lock AC Power Cord
At time of order, simply choose the IP54 rated Locking AC power cord you need.
FEATURES
Separate channels and volume controls for each diver and tender to accommodate individual earphone and microphone adjustments, equipment variations and individual comfort levels.
Divers’ umbilicals can be set up on 4-wire mode (full duplex) or 2-wire mode (push-to-talk) or any combination of the two modes for each diver.
Ability to use both dynamic and pre-amplified diver microphones with a unique circuit that detects microphone type and automatically adjusts volume levels.
Weatherproof push-to-talk microphone for better voice intelligibility topside. For optimum clarity, see Tech Note (below) for other recommended equipment.
Internal charger allows for simultaneous charging and operation of the unit while protecting the rechargeable battery from being overcharged. Automatically supplies power to the audio amplifier when AC power is disconnected to allow for continued operation.
SPECIFICATIONS
Input Impedance (Each Input): 250 Ohms
Frequency Response: 300 - 10000 Hz
Common Mode Rejection: 40 dB Minimum
Current Drain Maximum Full Volume: 3 Amps
Minimum Quiescent: 0.190 Amps
Output Impedance: 4 Ohm
Power Supply Voltage: 12 VDC Nominal(9 Volts Minimum - 16 Volts Maximum)AC Power Operating Range: 90-264 VAC, 50-60 Hz
Sensitivity (Input): 0.5 mV
Output Power (RMS @ 4 Ohm Load, 12 VDC): 10 Watts Audio
Battery Life: 45 hours
Dimensions: 10 in. H x 9 in. W x 14.5 in. L (25.4 cm x 22.9 cm x 36.8 cm)
Weight: 16.95 Lbs. (7.69 Kg)
INCLUDED WITH COMMUNICATOR
AMCOM ™ II 2825A-11 Two-Diver Deluxe Portable Communicator with Weather Resistant AC Power and Internal Charger includes:
(1) Amron 2405-28 Hand-Held Push-to-Talk Microphone
(1) Amron 2890-05 12 VDC Sealed Lead Acid Gel-Cell Rechargeable Battery with Slide terminals
(1) Amron 282XA-UM Two Diver Portable Communicator User Manual
AVAILABLE OPTIONS
Amron 2401-28 Deluxe Headset with Boom Mic
Amron 2460-28 Standard Headset with Boom Mic
Amron 2822-28 Remote Walk-and-Talk (4-wire mode)
Amron 2821-28 Remote Walk-and-Talk (2-wire mode)
TECH NOTE: All communicators will inherently transfer topside noise to the divers when the tender speaks directly into the communicator’s panel speaker. To eliminate background noise at the surface, use the 2405-28 Push-to-Talk Microphone, included with this model. For optimum communications, we recommend purchasing the 2401-28 Deluxe Headset with Boom Mic, topside. For tender maneuverability, use the 2401-28 Deluxe Headset with Boom Mic along with the 2822-28 Remote Walk-and-Talk (4-wire mode) or the 2821-28 Remote Walk-and-Talk (2-wire mode). For wireless tender communications, order the 2825A-03 Three-Diver Deluxe Portable Communicator with built-in Wireless Tender option.
The AMCOM™ II 2825A-11 Two-Diver Deluxe Portable Communicator features separate channels and volume controls for each diver and the tender so that uplink and downlink paths can be customized for varying equipment configurations and individual comfort levels.
TECH NOTE: This newest version of the AMCOM™ II has the same versatile user-interface, rugged durability and great sound quality as its predecessor with separate channels and volume controls for both divers and the tender so uplink and downlink paths can be customized for various equipment configurations and individual comfort levels in addition to: (1) Inhalation Noise Reduction (INR); (2) Higher Audio Fidelity; (3) Automatic Gain Adjustment; (4) Extended Battery Life; (5) Flexible Gain Settings; (6) Ultra-Low Electromagnetic Interference (EMI); (7) Outdoor IP65 Rated AC Power Module and; (8) Customer’s Choice of Country-Specific V-Lock IP54 Rated AC Power Cord.
The New Generation of Commercial Diving Helmet
D-ONE has been designed around the concept of modularity: One helmet shell to suit varying dive environments by means of interchangeable pods:
• Standard Pod for Air Diving
• Reclaim Pod for Air Diving in polluted/contaminated waters
• Rebreather & Reclaim Pod
For diving in contaminated waters, the helmet can be configured with a reclaim valve that prevents contact of the valve with polluted water. Coupled with a dry-suit and water shroud, the diver is effectively sealed off and protected from the surrounding environment
Incorporating the latest smart technology for increased safety, ergonomics and functionality, features unique
to D-ONE include:
Same shell reconfigured as Air, Reclaim or Rebreather by means of interchangeable pods
Wide-angled viewport for increased field of vision
30° rear-angled ergonomic design allowing upward-tilting neck motion
Anti-flood fail-safe donning, sealing & removal
Polyurethane gaskets for premium durability in the saline environment
Balanced Demand Regulator for smooth breathing
Integrated welding shield/hot water shroud/defogger
Integrated video camera & light
DRASS-patented remote diver monitoring for real-time tracking of breathing patterns, bail-out pressure, depth & inclination
Optimized spare parts for easy, safe maintenance
Camera
Compact and slim PAL video camera module, completed with a connectorized cable (Wetcon MCIL-4M), ready to be installed on top of Drass D-ONE diving helmet. It is the perfect companion of the helmet light. Maximum depth 300 msw. The camera features a high-resolution module with 850 TV lines in PAL standard (CVBS); the internal CCD sensor is a full-featured 1.3 Mpixel Sony: WDR (Wide Dynamic Range), 2D-DNR (Dynamic Noise Reduction), digital day&night. The CCD module has been specifically selected to ensure the best possible performances in diving activities, with low and uneven light levels. FOV (Field of View) is 90° in air and 80° in water. The camera is made with black anodized aluminum, and it has very limited dimensions: 147 mm length, 70 mm wide and only 50 mm height; moreover, the camera body is bent on the left so to perfectly align with the eyeline of the diver when installed on the D-ONE. Power supply is 24 Vdc, current consumption 80 mA @ 24 Vdc (2 W). To obtain the best signal quality, it is recommended to use a cable with 2xSTP, especially when the camera is used in conjunction with dimmable lights or other electromagnetically noisy devices – maximum recommended connection cable length is 100 meters. Each camera has its own SN and is subject to a complete FAT (functional test and pressure test at 47 bar) before delivery or installation on the helmet
Light
Compact and slim light module, completed with a connectorized cable (Wetcon MCIL-2M), ready to be installed on top of the Drass D-ONE diving helmet. It is the ideal companion for the helmet camera. Maximum depth 300 msw. The core of the light is a new high performance, round led cluster including 4 cool white leds, delivering a total of 940 lumens at full power. Color temperature Is cold white (5650 K typical). The led cluster is completed with a circular narrow beam optic with 10° aperture, capable to increase by more than 10 times the light intensity of the beam, so to be able to light even far spots - 4000 lux @ 1m typical intensity. The led cluster is supplied by and internal driver, which can be powered directly with a continuous 24 Vdc for maximum power (typical power 10W), or with a dimmed power to be able to control the light intensity from 0% to 100%. This is possible thanks to the capability of the driver to be controlled by means of PWM signals (Pulse-Width Modulation) in CV Mode (Constant Voltage) – ask Drass for details. The light is made with black anodized aluminum, and it has very limited dimensions: 143 mm length, 70 mm wide and only 50 mm height; moreover, the camera body is bent on the right so to perfectly align with the eyeline of the diver when installed on the D-ONE. Each light has its own SN and is subject to a complete FAT (functional test and pressure test at 47 bar) before delivery or installation on the helmet.
PLUS POD FOR AIR DIVING IN CONTAMINATED/POLLUTED WATERS
D-ONE PLUS Pod, interchangeable with D-ONE Air Pod, comes in stainless steel and titanium and is designed for air diving in contaminated/polluted waters. Its robust Gas Reclaim Back Pressure Regulator valve enables the recovery of exhaled Heliox mixture during saturation dives to 400msw.
D-ONE diving helmet is innovatively modular, granting one helmet shell to be seamlessly adaptable to various diving environments thanks to its dive-specific pods.
Gas Reclaim Valve: 0.5 Kg lighter compared to other commercial valves;
Optimized breathing effort: Perfect synergy of its critical elements ensures smooth breathing and maximized gas reclaim at any depth;
Titanium Flow-Disc: Lightweight and durable. Allows easy access to the inner valve area;
Efficiency: Flow-Disc configurations specific to each working depth for maximum gas recovery on every dive;
Intuitive placement: Reclaim Isolation and Emergency Valves positioned at same height for convenient reach;
Seamless Ball-Valve installation: Mirroring diving helmet for simplicity;
Easy removal of dirt and debris, unlike other commercial valves on the market;
Maintenance in 15-minutes using standard tools. No special tools required.
No results match your search. Try removing a few filters.
