Outland Technology Portable High Definition Dual Video and Light Console OTI-CON-3700. Its innovative design consolidates the Outland video and light system with the Amron communicator into a single, compact case, while continuing to provide industry-leading quality and reliability.
Features
Dual diver video and light control.
Built-in dual Amron communicator with speaker.
1080P high definition dual diver console.
Dual 0-100% variable lamp control.
Supports SD, HD, and Outland smart cameras.
Supports 2-wire and 4-wire dive communication.
Built-in 45 hr. battery backup for communicator and DVR with 1 TB hard drive.
Specifications
Weight: 35 lbs. (16 kg)
15 in. ~1600nit, 16:9 1080p sunlight readable HD LCD color with audio
Model CON-3700/D Console
Mechanical:
Size: 18.5 in. W x 14.5 in. D x 8 in. D (7.3 x 5.7 x 3.15 cm)
Weight: 35 lbs. (16 kg)
Electrical:
Input Voltage: 110-240 VAC; 50/60Hz
Power: 350 watts max
Light Supply: (2) 24VDC @ 1.85 A Max
Camera Supply: (2) 14.5 VDC @ .25 A Max
Cable Connectors: (2) MS3102-18-08S
Radio:
Radio Connections: (8) 5-way Binding Posts
Headset Connections: (6) Banana Jacks
External Battery Connection: (2) Tip Jacks
OPTIONS
Smart camera controller with dive timer (6200)
Amron deluxe headset with boom mic and dual banana plugs - P/N: 2401-28
DC Option (/DC) 300W pure sign wave inverter
The Amron International Model 3114 Talk Back Speaker is encased in a die-cast housing with a stainless steel front panel. Speaker is 8 watts, 8 ohms. Frequency Range: 250 Hz - 10,000 Hz. Input connection: 3 ft. SJO cable, 18 AWG. Housing is die-cast zinc with gray epoxy powder coat, with a 300 series stainless steel front panel.
DISCLAIMER NOTICE: Amron's communications equipment is designed to be used in air chambers where oxygen concentrations remain below 23.5%. Our communications products (including communicators, speakers, entertainment systems, and other communications accessory items) are NOT designed for oxygen service, are not intrinsically safe, and do not meet the criteria given in NFPA-99, Chapter 20 and other applicable definitions. Use of our products in high-concentration Oxygen environments may result in serious injury and/or death.
Specifications
8 Ω
Voice Range: 8 watts
Frequency Range: 250 Hz – 10,000 Hz
Input Connection: 3 ft. SJO cable, 18 AWG
Material:
Housing: Die-cast zinc with gray powder coat
Front Panel: 300 series stainless steel
Height: 4.25 in. (10.8 cm)
Width: 5.5 in. (14 cm)
Depth 2 in. (5.1 cm)
Weight: 5 lb. (2.3 kg)
RMG-4-FS In-Line Rubber Molded Connector - 4 female sockets with 24 in. pigtail of 18 AWG SJOOW cable. This Marsh Marine-style connector is intermateable between brands in this RMG-4 category.
Applications
Diver umbilical communications, underwater cameras, lighting systems, and instrumentation.
Specifications
Material: Special neoprene, molded
Contacts: Copper alloy-gold plated per ASTM-B-488
Voltage Rating: 300 VDC
Pressure Rating: Up to 20,000 PSI
Cable: 18/4 AWG SJOOW
Cable Length: 24 in.
FAQ's
Why is the SJO cable on the RMG-4-FS only rated to 300 volts when the other RMG connectors are rated to 600 volts?
Amron had to use a SJO cable with a thinner walled jacket to allow the cable to be used with the commercial diving helmet penetrator and diving umbilical.
After I solder my RMG waterproof connector to my umbilical, how do I waterproof the connection?
Amron recommends using an 82-F1 inline splice kit to waterproof your RMG to umbilical connection. We chose this resin because it’s semi-flexible and extremely durable in the harsh underwater environment.
The RMG-3-MP In-Line Rubber Molded Connector - 3 Pin Male with 18 SO AWG Cable. Other typical uses are for underwater cameras, lighting systems, instrumentation.
Applications
Underwater cameras, lighting systems and instrumentation.
Specifications
Material: Special neoprene, molded
Contacts: Copper alloy-gold plated per ASTM-B-488
Voltage Rating: 600 VDC
Pressure Rating: Up to 20,000 PSI
Cable: 18/3 AWG SO
Cable: 24 in.
The RMG Dummy Connectors are manufactured in both Low Pressure (LP) and High Pressure (HP). Instead of a cable, it is solid rubber on the end (about 3 in. long rubber).
Features
Standard rubber molded dummy connector
Mated Pressure Rating: 20,000 psi (male pin contact required) or < 4,000 PSI (male pin contact not required)
Female socket
Number of Contacts: 3
Mates with: RMG-3-MP and XSG-3-BCL
Locking Sleeve: G-FLS-D
Specifications
Material: Special neoprene, molded
Voltage Rating: 600 VDC-contact factory for higher voltage requirements
RMG-3-FS In-Line Rubber Molded Connector - 3 Socket Female with 18/3 SOOW cable. This Marsh Marine style connector is inter-mateable between brands in this RMG-3 category.
Applications
Underwater cameras, lighting systems, and instrumentation.
Specifications
Material: Special neoprene, molded
Contacts: Copper alloy-gold plated per ASTM-B-488
Voltage Rating: 600 VDC
Pressure Rating: Up to 20,000 PSI
Cable: 18/3 AWG SOOW
Cable Length: 24 in.
Mating Connectors: RMG-3-MP, RMG-3-MPD (dummy), RMG-3-BCL (bulkhead)
Locking Sleeves: G-FLS-D (delrin), G-FLS-S (stainless steel)
RMG-4-MP In-Line Rubber Molded Connector - 4 Pin Male connector
Applications
A male connector is typically installed on helmets/masks and mates with a female connector on a diver communications cable/umbilical.
Underwater cameras, lighting systems, and instrumentation.
Specifications
Material: Special neoprene, molded
Contacts: Copper alloy gold-plated per ASTM-B-488
Voltage Rating: 300 VDC
Pressure Rating: Up to 20,000 PSI
Cable: 18/4 AWG SJOOW
Pigtail Length: 24 in.
Locking Sleeve: G-MLS-D (Delrin®) or G-MLS-S (stainless steel)
FAQ's
Why is the SJO cable on the RMG-4-MP only rated to 300 volts when the other RMG connectors are rated to 600 volts?
Amron had to use a SJO cable with a thinner walled jacket to allow the cable to be used with the commercial diving helmet penetrator.
DISCLAIMER NOTICE: Left Surface reserves the option to supply this style from multiple manufacturers. If you prefer a particular manufacturer, please let your salesperson know before ordering.
The Amron International Model 2401-28 is a dual-sided medium-weight passive noise reduction deluxe headset with a dynamic noise-canceling boom microphone. This headset comes standard with a 6 ft. straight cord and Dual Banana Plugs that mates to all Amron series communicators. This headset has a superior noise reduction rating of 21 dB; suitable for use in a noisy environment. The 2401-28 features a unique, soft moleskin covered headband for all day comfort. The ergonomic headset design distributes ear cushion pressure evenly over the entire ear with no pressure points. Another great feature is that the headset folds into compact form for ease of transport and storage.
Features
Passive noise reduction deluxe headset.
Adjustable noise-canceling boom microphone can pivot up or down.
Adjustable soft moleskin covered headband for all day comfort.
Dual-sided ergonomic ear cushions distributes pressure evenly over the entire ear with no pressure points.
Built-in comfort for extended use.
6 ft. straight cord with dual banana plugs.
Headset folds into compact form for ease of transport and storage.
Custom length straight cords available.
Optional replacement ear cushions & ear cushion sock covers available.
How long is the spiral cord on the Amron Standard Headset?
The compressed cord is 20 inches long but can be stretched to roughly 8 ft.
DISCLAIMER NOTICE: Amron International’s communications equipment is designed to be used in air chambers where oxygen concentrations remain below 23.5%. Our communications products (including communicators, speakers, entertainment systems, and other communications accessory items) are NOT designed for oxygen service, are not intrinsically safe, and do not meet the criteria given in NFPA-99, Chapter 20 and other applicable definitions. Use of our products in high-concentration Oxygen environments may result in serious injury and/or death.
The Amron International Model 2401SM-28 is a single muff medium-weight passive noise reduction deluxe headset with a dynamic noise-canceling boom microphone. This headset comes standard with a 6-foot straight cord and dual banana plugs that mates to all Amron series communicators. This headset has a superior noise reduction rating of 21 dB suitable for use in a noisy environment. The 2401-28 features a unique, soft moleskin covered headband for all day comfort. The ergonomic headset design distributes ear cushion pressure evenly over the entire ear with no pressure points. Another great feature is that the headset folds into compact form for ease of transport and storage.
Features
Passive noise reduction deluxe headset.
Adjustable noise-canceling boom microphone can pivot up or down.
Adjustable soft moleskin covered headband for all day comfort.
Ergonomic single ear muff cushion distributes pressure evenly over the entire ear with no pressure points.
Built-in comfort for extended use.
6 ft. straight cord with dual banana plugs.
Headset folds into compact form for ease of transport and storage.
Custom length straight cords available.
Optional replacement ear cushion & ear cushion sock cover available.
DISCLAIMER NOTICE: Amron International’s communications equipment is designed to be used in air chambers where oxygen concentrations remain below 23.5%. Our communications products (including communicators, speakers, entertainment systems, and other communications accessory items) are NOT designed for oxygen service, are not intrinsically safe, and do not meet the criteria given in NFPA-99, Chapter 20 and other applicable definitions. Use of our products in high-concentration Oxygen environments may result in serious injury and/or death.
This communication unit is specifically designed to meet the needs of professional and commercial divers that cannot compromise on a full duplex, hands free, super clear communication system. Cable communication is still unequaled in quality, while needing a hard connection diver to surface.
Features
Hardwired, full duplex surface unit for underwater communications.
2 ports for 2 communication cables.
On/off and volume adjustment switches.
Microphone.
Switch for communication between surface & diver 1, surface & diver 2, surface & diver 1 & diver 2.
Headset port (headset optional).
External 12v power port (cable optional).
Battery charger port.
Audio/video recall.
Incorporated speaker.
12V rechargeable battery.
Underwater unit volume adjustment (for both divers).
Stand-by autonomy: 24h.
The OCEAN REEF GSM CUBE3 is an Underwater Communication Unit capable of operating wireless/hardwired or interfaced with a VHF radio - 3 units in one. If the unit is connected to the Alpha Pro X-DIVERS surface unit via a cable, then communication is in full duplex mode with the surface unit (no need to press the transceiver button to communicate). At the same time, the unit is capable of communicating with other wireless underwater units such as the OCEAN REEF GSM G.divers, GSM DC, GSM G-Power and GSM G-Power SL, M105 and M100 G.divers.
By pressing the button of the PTT, the unit is transmitting on channel 1 of ultrasonic frequency (channel 1 - 32.768 kHz). The GSM CUBE3 can be connected to a VHF radio through the waterproof carrying bag and other relevant connectors and interfaces. The GSM CUBE3 is equipped with a special plug for the six pin connector which can be used when you don't need to connect the cable. You can also connect and disconnect the unit to/from the cable while underwater.
Features
GSM Cube 3 Wireless Communication System
Underwater Communication Unit capable of operating wireless or hardwire or VHF.
Operating Modes:
Connected to an ALPHA PRO X-DIVERS surface unit by cable - Hardwire
Connected to a Gamma 105 surface unit - Wireless
Connected to the VHF system - Becomes a GSM-VHF
Can connect to other wireless systems transmitting on channel 1 – 32.768 kHz
Communicates with other wireless underwater units such as the OCEAN REEF GSM G.divers, GSM DC, GSM G-Power and GSM G-Power SL, M105 and M100 G.divers
Specifications
Rated Depth: 120 ft. (40 m)
Powered By: 9V alkaline battery
Color: Orange and black
Weight: 1.44 lb.
Sold Per Meter
OCEAN REEF's Professional Cable with Rope, Audio or Video is sold per meter and is available in any length. The professional cable includes a polyurethane jacket and yellow exterior rope to protect the cable from damage. The Professional Cable has a 900 lbs (4,000-newton resistance) breaking strength..
Specifications:
Materials: Polyurethane jacket and yellow exterior rope to protect the cable from damage
Strength: 900 lbs (4,000-newton resistance) breaking strength
Audio or Video is sold per meter and is available in any length
FAQ's
What is the wire gauge size for the Ocean Reef Professional Cable?
1x Micro-coaxial: Conductor 28AWG, Tinned copper braid coverage >90%
4x Conductor 25AWG
Amron Field Spares Kit for 28XXA-XX Communicators w/ Internal Power Supply
Amron 28XXA-FS-02 Field Spares Kit for 28XXA-XX Communicators Includes
(1) Toggle Switch – P/N: 7580K6
(1) Toggle Switch – P/N: 757-3522
(2) Yellow Push-To-Talk Buttons – P/N: PBSWITCH
(2) Knurled Thumb Screws (Brass) – P/N: 8-32X3/4KTSB
(1) Potentiometer 10K with Knob – P/N: P16NP-10K
(1) Tip Jack (Red) – P/N: 105-0602-001
(1) Tip Jack (Black) – P/N: 105-0603-001
(2) Banana Jacks (Red) – P/N: 1498-102
(2) Banana Jacks (Black) – P/N: 1498-103
(2) Banana Jacks (Yellow) – P/N: 1498-107
(2) Cooper Bussman Fuses, 4A/250V, Slo-Blo 5X20MM Glass Tube - P/N: 130-1002-01
(2) Toggle Switch Seal Half Boots (Grey) – P/N: 5168
(2) 5-Way Binding Posts (Black) – P/N: 14002B
(2) 5-Way Binding Posts (Red) – P/N: 14002R
(1) Fuses 3.15A/250V Micro Quick Acting – P/N: 0034.6019
(2) Mounting Clips for 5mm LED – P/N: LEDHOLDER-BLK.25
(1) LED Bi-Color Red/Green – P/N: LT2462-24-D51
(1) LED Bright Green – P/N: LEDGREEN
*NOTE: To be used with Power Supply - P/N: 190-0101-00.
Amron 12 VDC Sealed Lead Acid Rechargeable Battery with Slide terminals
Specifications
Standby Use:
Voltage Regulation: 13.6 -1 3.8v
Initial Current: 1.1A
Cyclic Use:
Voltage Regulation: 14.5 - 14.9v
Initial Current: 2.2A
Amron 12 VDC Sealed Lead Acid Rechargeable Battery with Slide terminals supports the following
AMCOM II - 2820A/24; 2820A-01; 2825A/24; 2825A-01; 2825A/24/26DSP3; 2825A-02
AMCOM II - 2825A/24/28FDW
AMCOM III - 2830A/24; 2830A-01; 2830A/24-MS; 2830A-05; 2830A/24/26DSP3; 2830A-02
AMCOM III - 2830A/24/26-MS; 2830A/24/28FDW
AMCOM III - 2830A/24/28FDW-MS
AMCOMMAND II - 8225-HP2
Note: Amron reserves the right to change the battery brand at any time without notice.
Amron Standard Operator Headset with Boom Mic and Dual Banana Plugs
Features
Adjustable boom microphone
Cushioned adjustable headband
Dual banana plugs
Ergo-formed ear cushions for extended use.
Coiled cord that extends up to 6 ft. overall length.
Custom length straight cords available.
Optional replacement ear cushions & ear cushion sock covers also available.
Specifications
Overall Length: 6 ft.
The Amron International Model 2460-28 is a dual-sided medium-weight headset with Dual Banana Plugs and coiled cord that extends up to 6 ft. The 2460-28 headset is designed for extended comfortable "full ear-cup" and features a unique heptagonal design that covers the ear naturally and completely. The ear cushions are not only wide and soft, but slightly thicker to the bottom and rear. Together, these "ergo-formed" shapes are the reason why the 2460-28 headset simply fits better!
DISCLAIMER NOTICE: Amron International’s communications equipment is designed to be used in air chambers where oxygen concentrations remain below 23.5%. Our communications products (including communicators, speakers, entertainment systems, and other communications accessory items) are NOT designed for oxygen service, are not intrinsically safe, and do not meet the criteria given in NFPA-99, Chapter 20 and other applicable definitions. Use of our products in high-concentration Oxygen environments may result in serious injury and/or death.
NEWLY DESIGNED ENHANCEMENTS
Low-impedance, balanced-line shock-mounted dynamic microphone provides an improved smooth, peak-free response and trouble-free performance.
Microphone housing is constructed of molded ABS plastic, which will withstand the day-to-day abuse of hand-held mobile microphone applications.
Features
Push-to-talk Switch is located on the microphone housing.
Output impedance is 200 ohms for matching low impedance input circuits.
Color-coded banana plugs mate directly to the color-coded inputs of all Amcom™ Communicators.
Amron 2830A-11 Three-Diver Rechargeable Portable Communicator with Outdoor AC Power Module and International Locking Power Cord
ENHANCEMENTS
High Audio Fidelity
Ultra-low noise circuit combined with noise suppression circuitry produces crystal clear speech. Automatic gain adjustment will guard audio signal from distortion, enhance speaker protection and audio quality. Increases band width 47%.
Extended Battery Operation Time
Audio amplifier card deploys the state-of-the-art Class-D digital audio power amplifier. Has very low power dissipation, produces less heat, and extends battery life up to 32%.
Flexible Gain Settings
The audio amplifier card has adjustable gain settings to accommodate different communication applications and environments.
Ultra-Low Electromagnetic Interference (EMI)
EMI is achieved through spread-spectrum and de-phase control techniques providing for optimum integration with diving systems.
Outdoor Rated AC Power Module
Weather resistant, IP65 rated AC power entry module accommodates country specific AC power cords.
Country Specific V-Lock AC Power Cord
At time of order, simply choose the IP54 rated Locking AC power cord you need.
FEATURES
Separate channels and volume controls for each diver and tender to accommodate individual earphone and microphone adjustments, equipment variations and individual comfort levels.
Divers’ umbilicals can be set to 4-wire mode (full duplex) or 2-wire mode (push-to-talk) or any combination of the two modes for any diver.
Ability to use both dynamic and pre-amplified diver microphones with a unique circuit that detects microphone type and automatically adjusts volume levels.
Weatherproof push-to-talk microphone for better voice intelligibility topside. For optimum clarity, see Tech Note (below) for other recommended equipment.
Internal charger allows for simultaneous charging and operation of the unit while protecting the rechargeable battery from being over-charged. Automatically supplies power to the audio amplifier when AC power is disconnected to allow for continued operation.
SPECIFICATIONS
Input Impedance (Each Input): 250 Ω
Frequency Response: 300–10000 Hz
Common Mode Rejection: 40 dB minimum
Current Drain Maximum Full Volume: 3 amps
Minimum Quiescent: 0.190 amps
Output Impedance: 4 Ω
Power Supply Voltage: 12 VDC nominal (9 volts minimum - 16 volts maximum)
AC Power Operating Range: 90-264 VAC, 50-60 Hz
Sensitivity (Input): 5 mV
Output Power (RMS @ 4 Ω load, 12 VDC): 10 watts audio
Battery Life: 41 hours
Dimensions: 10 in. H x 9 in. W x 14.5 in. L (25.4 cm x 22.9 cm x 36.8 cm)
Weight: 17.05 lbs. (7.73 kg)
INCLUDED WITH COMMUNICATOR
AMCOM™ III 2830A-11 Three-Diver Portable Communicator with AC Power, Internal Charger and Rechargeable Battery includes:
(1) Amron 2890-05 12 VDC Sealed Lead Acid Gel-Cell Rechargeable Battery with Slide terminals
(1) Amron 283XA-UM Three-Diver Portable Communicator User Manual
AVAILABLE OPTIONS
Amron 2821-28 Remote Walk-and-Talk (2-wire mode)
TECH NOTE: All communicators will inherently transfer topside noise to the divers when the tender speaks directly into the communicator’s panel speaker. To eliminate background noise at the surface, use the 2405-28 Push-to-Talk Microphone, included with this model. For optimum communications, we recommend purchasing the 2401-28 Deluxe Headset with Boom Mic, topside. For tender maneuverability, use the 2401-28 Deluxe Headset with Boom Mic along with the 2822-28 Remote Walk-and-Talk (4-wire mode) or the 2821-28 Remote Walk-and-Talk (2-wire mode). For wireless tender communications, order the 2825A-03 Three-Diver Deluxe Portable Communicator with built-in Wireless Tender option.
The AMCOM™ II 2825A-11 Two-Diver Deluxe Portable Communicator features separate channels and volume controls for each diver and the tender so that uplink and downlink paths can be customized for varying equipment configurations and individual comfort levels.
TECH NOTE: This newest version of the AMCOM™ II has the same versatile user-interface, rugged durability and great sound quality as its predecessor with separate channels and volume controls for both divers and the tender so uplink and downlink paths can be customized for various equipment configurations and individual comfort levels in addition to: (1) Inhalation Noise Reduction (INR); (2) Higher Audio Fidelity; (3) Automatic Gain Adjustment; (4) Extended Battery Life; (5) Flexible Gain Settings; (6) Ultra-Low Electromagnetic Interference (EMI); (7) Outdoor IP65 Rated AC Power Module and; (8) Customer’s Choice of Country-Specific V-Lock IP54 Rated AC Power Cord.
Amron 2825A-11 Two-Diver Rechargeable Portable Communicator with Outdoor AC Power Module and International Locking Power Cord
ENHANCEMENTS
High Audio Fidelity
Ultra-low noise circuit combined with noise suppression circuitry produces crystal clear speech. Automatic gain adjustment will guard audio signal from distortion, enhance speaker protection and audio quality. Increases band width 47%.
Extended Battery Operation Time
Audio amplifier card deploys the state-of-the-art Class-D digital audio power amplifier. Has very low power dissipation, produces less heat, and extends battery life up to 32%.
Flexible Gain Settings
The audio amplifier card has adjustable gain settings to accommodate different communication applications and environments.
Ultra-Low Electromagnetic Interference (EMI)
EMI is achieved through spread-spectrum and de-phase control techniques providing for optimum integration with diving systems.
Outdoor Rated AC Power Module
Weather resistant, IP65 rated AC power entry module accommodates country specific AC power cords.
Country Specific V-Lock AC Power Cord
At time of order, simply choose the IP54 rated Locking AC power cord you need.
FEATURES
Separate channels and volume controls for each diver and tender to accommodate individual earphone and microphone adjustments, equipment variations and individual comfort levels.
Divers’ umbilicals can be set up on 4-wire mode (full duplex) or 2-wire mode (push-to-talk) or any combination of the two modes for each diver.
Ability to use both dynamic and pre-amplified diver microphones with a unique circuit that detects microphone type and automatically adjusts volume levels.
Weatherproof push-to-talk microphone for better voice intelligibility topside. For optimum clarity, see Tech Note (below) for other recommended equipment.
Internal charger allows for simultaneous charging and operation of the unit while protecting the rechargeable battery from being overcharged. Automatically supplies power to the audio amplifier when AC power is disconnected to allow for continued operation.
SPECIFICATIONS
Input Impedance (Each Input): 250 Ohms
Frequency Response: 300 - 10000 Hz
Common Mode Rejection: 40 dB Minimum
Current Drain Maximum Full Volume: 3 Amps
Minimum Quiescent: 0.190 Amps
Output Impedance: 4 Ohm
Power Supply Voltage: 12 VDC Nominal(9 Volts Minimum - 16 Volts Maximum)AC Power Operating Range: 90-264 VAC, 50-60 Hz
Sensitivity (Input): 0.5 mV
Output Power (RMS @ 4 Ohm Load, 12 VDC): 10 Watts Audio
Battery Life: 45 hours
Dimensions: 10 in. H x 9 in. W x 14.5 in. L (25.4 cm x 22.9 cm x 36.8 cm)
Weight: 16.95 Lbs. (7.69 Kg)
INCLUDED WITH COMMUNICATOR
AMCOM ™ II 2825A-11 Two-Diver Deluxe Portable Communicator with Weather Resistant AC Power and Internal Charger includes:
(1) Amron 2405-28 Hand-Held Push-to-Talk Microphone
(1) Amron 2890-05 12 VDC Sealed Lead Acid Gel-Cell Rechargeable Battery with Slide terminals
(1) Amron 282XA-UM Two Diver Portable Communicator User Manual
AVAILABLE OPTIONS
Amron 2401-28 Deluxe Headset with Boom Mic
Amron 2460-28 Standard Headset with Boom Mic
Amron 2822-28 Remote Walk-and-Talk (4-wire mode)
Amron 2821-28 Remote Walk-and-Talk (2-wire mode)
TECH NOTE: All communicators will inherently transfer topside noise to the divers when the tender speaks directly into the communicator’s panel speaker. To eliminate background noise at the surface, use the 2405-28 Push-to-Talk Microphone, included with this model. For optimum communications, we recommend purchasing the 2401-28 Deluxe Headset with Boom Mic, topside. For tender maneuverability, use the 2401-28 Deluxe Headset with Boom Mic along with the 2822-28 Remote Walk-and-Talk (4-wire mode) or the 2821-28 Remote Walk-and-Talk (2-wire mode). For wireless tender communications, order the 2825A-03 Three-Diver Deluxe Portable Communicator with built-in Wireless Tender option.
The AMCOM™ II 2825A-11 Two-Diver Deluxe Portable Communicator features separate channels and volume controls for each diver and the tender so that uplink and downlink paths can be customized for varying equipment configurations and individual comfort levels.
TECH NOTE: This newest version of the AMCOM™ II has the same versatile user-interface, rugged durability and great sound quality as its predecessor with separate channels and volume controls for both divers and the tender so uplink and downlink paths can be customized for various equipment configurations and individual comfort levels in addition to: (1) Inhalation Noise Reduction (INR); (2) Higher Audio Fidelity; (3) Automatic Gain Adjustment; (4) Extended Battery Life; (5) Flexible Gain Settings; (6) Ultra-Low Electromagnetic Interference (EMI); (7) Outdoor IP65 Rated AC Power Module and; (8) Customer’s Choice of Country-Specific V-Lock IP54 Rated AC Power Cord.
No results match your search. Try removing a few filters.
