MS3108B-18-08P Includes
Right angle 8-pin MS-style connector shell with clamp*
*Note: This item is no longer sold with a bushing. Bushings may be purchased separately depending on the size of your video cable. Bushings are used to reduce friction and provide strain-relief, wear and tear to the cable.
There are three recommended Bushing options
P/N: MS-3420-8 - Bushing for cables up to .437 in. diameter (recommended for use with Outland C-2300 video cable).
P/N: MS-3420-10 - Bushing for cables up to .562 in. diameter.
P/N: MS-3420-6 - Bushing for cables up to .312 in. diameter (needs to be purchased with the MS-3420-8 bushing for nesting and proper fitting inside the MS3108B-18-08P shell and clamp).
RMG-4-FS In-Line Rubber Molded Connector - 4 female sockets with 24 in. pigtail of 18 AWG SJOOW cable. This Marsh Marine-style connector is intermateable between brands in this RMG-4 category.
Applications
Diver umbilical communications, underwater cameras, lighting systems, and instrumentation.
Specifications
Material: Special neoprene, molded
Contacts: Copper alloy-gold plated per ASTM-B-488
Voltage Rating: 300 VDC
Pressure Rating: Up to 20,000 PSI
Cable: 18/4 AWG SJOOW
Cable Length: 24 in.
FAQ's
Why is the SJO cable on the RMG-4-FS only rated to 300 volts when the other RMG connectors are rated to 600 volts?
Amron had to use a SJO cable with a thinner walled jacket to allow the cable to be used with the commercial diving helmet penetrator and diving umbilical.
After I solder my RMG waterproof connector to my umbilical, how do I waterproof the connection?
Amron recommends using an 82-F1 inline splice kit to waterproof your RMG to umbilical connection. We chose this resin because it’s semi-flexible and extremely durable in the harsh underwater environment.
Specifications
Type: 5-contact female socket on one end
Cable: 24 in. pigtail 5-conductor 18 AWG SOOW cable
Material: Neoprene rubber
Contacts: Gold-plated
Voltage Rating: 600 VDC-contact factory for higher voltage requirements
Pressure Rating, Mated: Up to 20,000 psi (1370 bar = 13,700 m water depth)
Mates With: RMK-5-MP, RMK-5-MPD, RMK-5-MPD-HP, XSK-5-BCL, RMK-5-BCL
Locking Sleeves: Female K-FLS-D, Male K-MLS-D (purchased separately)
Larger profile than RMG and VMG
The RMG-3-MP In-Line Rubber Molded Connector - 3 Pin Male with 18 SO AWG Cable. Other typical uses are for underwater cameras, lighting systems, instrumentation.
Applications
Underwater cameras, lighting systems and instrumentation.
Specifications
Material: Special neoprene, molded
Contacts: Copper alloy-gold plated per ASTM-B-488
Voltage Rating: 600 VDC
Pressure Rating: Up to 20,000 PSI
Cable: 18/3 AWG SO
Cable: 24 in.
The RMG Dummy Connectors are manufactured in both Low Pressure (LP) and High Pressure (HP). Instead of a cable, it is solid rubber on the end (about 3 in. long rubber).
Features
Standard rubber molded dummy connector
Mated Pressure Rating: 20,000 psi (male pin contact required) or < 4,000 PSI (male pin contact not required)
Female socket
Number of Contacts: 3
Mates with: RMG-3-MP and XSG-3-BCL
Locking Sleeve: G-FLS-D
Specifications
Material: Special neoprene, molded
Voltage Rating: 600 VDC-contact factory for higher voltage requirements
RMG-3-FS In-Line Rubber Molded Connector - 3 Socket Female with 18/3 SOOW cable. This Marsh Marine style connector is inter-mateable between brands in this RMG-3 category.
Applications
Underwater cameras, lighting systems, and instrumentation.
Specifications
Material: Special neoprene, molded
Contacts: Copper alloy-gold plated per ASTM-B-488
Voltage Rating: 600 VDC
Pressure Rating: Up to 20,000 PSI
Cable: 18/3 AWG SOOW
Cable Length: 24 in.
Mating Connectors: RMG-3-MP, RMG-3-MPD (dummy), RMG-3-BCL (bulkhead)
Locking Sleeves: G-FLS-D (delrin), G-FLS-S (stainless steel)
RMG-4-MP In-Line Rubber Molded Connector - 4 Pin Male connector
Applications
A male connector is typically installed on helmets/masks and mates with a female connector on a diver communications cable/umbilical.
Underwater cameras, lighting systems, and instrumentation.
Specifications
Material: Special neoprene, molded
Contacts: Copper alloy gold-plated per ASTM-B-488
Voltage Rating: 300 VDC
Pressure Rating: Up to 20,000 PSI
Cable: 18/4 AWG SJOOW
Pigtail Length: 24 in.
Locking Sleeve: G-MLS-D (Delrin®) or G-MLS-S (stainless steel)
FAQ's
Why is the SJO cable on the RMG-4-MP only rated to 300 volts when the other RMG connectors are rated to 600 volts?
Amron had to use a SJO cable with a thinner walled jacket to allow the cable to be used with the commercial diving helmet penetrator.
DISCLAIMER NOTICE: Left Surface reserves the option to supply this style from multiple manufacturers. If you prefer a particular manufacturer, please let your salesperson know before ordering.
Specifications
Dimensions:
7.5 in. x 50 ft.
7.5 in. x 100 ft.
Max Umbilical Inside Diameter: 1.75 in.
2 in. velcro edge closure and end snaps
Fits:
Standard 3-part diving umbilical (air, pneumo, and comms)
Standard 4-part diving umbilical with hot water hose (air, pneumo, comms, and hot water)
5-part diving umbilical with max inside diameter of 1.75 in.
Material: Vinyl coated fabric, UV and mildew resistant
Colors:
Green
Red
Yellow
Note: If you have a 5-Part Diving Umbilical, you will need to confirm your umbilical diameter does not exceed 1.75 in. This umbilical sheath has been confirmed to fit a standard 3-Part Diving Umbilical (Air, Pneumo, and Comms) and 4-Part Diving Umbilical with Hot Water Hose (Air, Pneumo, Comms, and Hot Water).
Features
Rugged, flexible and long-lasting.
Resistant to abrasion and kinking.
Buoyant in seawater and freshwater.
Clean and odor-free hoses.
Spiral wound elements.
3-Part Umbilical-Air, Pneumo, and Comms with Strength Element Includes
Length: 330 ft.
3-Part spiral wound umbilical - air, pneumo, and comms/strength
Oxygen fittings installed on both ends of the diver's hose and surface end of the pneumo hose.
4-pin female waterproof connector installed on the diver's end of the comm cable.
U.S. Navy 5-pin male MS connector on the surface end of the comm cable.
Snap shackle (MWL 2980 lb. / BL 5950 lb.) with welded D-ring installed on diver end, seized 48 in. from the umbilical end.
D-ring installed on the surface end, seized 10 ft. from the umbilical end.
Brass tag showing manufacturing and testing information.
Fully tested, includes testing certification.
3/4 IN #12 JIC HOSE FITTING
Applications:
#12 JIC Hose fitting for 3/4 inch I.D. Cortland Fibrolite and Fibroflex Umbilical Hoses
Specifications:
Hose Details:
Bore (ID): 3/4 inch
Hose Type: Fibrolite, Fibroline and Fibroflex
Hose Fitting: #12 JIC
Part Number: FBL12
O.D.: 30.60 MM
Max Working Pressure: 500 PSI
Ferrule O.D.:
Body Material: Swageable Phosphor-Bronze
Pre Crimp: 39.60 mm
Post Crimp: 33.20 CDD ± 0.20 mm
Cortland 1/2 inch #8 JIC Hose Fitting Swagable Phosphor - Bronze
The Fibroline (FBL series) and Fibrolite (FLT series) pneumo, gas and hot water hoses have an extruded polyurethane final finish (Fibroline with a thicker cover for greater robustness). These are typically used in surface demand / air dive applications.
Applications:
#8 JIC Hose fitting for 1/2 inch I.D. Cortland Fibrolite and Fibroflex Umbilical Hoses
Specifications:
Hose Details:
Body Material: Swagable Phosphor - Bronze
Bore: 1/2 inch
Hose Type: Fibrolite and Fibroflex
Hose Fitting: #6 JIC
Part Number: FLT06R*
O.D.: 18.50 mm
Max Working Pressure: 400 PSI
Ferrule O.D.:
Pre Crimp: 25.40 mm
Post Crimp: 20.00 CDD ± 0.20 mm
Note: Crimp down diameters (CDD) are for Cortland phosphor bronze hose end fittings for the Cortland ranges of diving hoses.
Fibron 1/4 inch Oxygen Hose Fitting Swagable Phosphor - Bronze
The Fibroflex pneumo, gas and hot water hoses (FDH series), light-weight collapse and recover (C/R) reclaim (FRH series) and non-collapse reclaim hoses (FXH series), all have a fibre braided final finish. These are typically used in both main services umbilicals and bell excursion umbilicals.
Applications:
Oxygen Hose fitting for 1/4 inch ID Fibron Fibrolite and Fibroflex Umbilical Hoses
Specifications:
Hose Details:
Body Material: Swagable Phosphor - Bronze
Bore: 1/4 inch
Hose Type: Fibroflex and Fibrolite
Hose Fitting: Oxygen
Part Number: FDH04
O.D.: 11.90 mm
Max Working Pressure: 1000 PSI
Ferrule O.D.:
Pre Swage: 19.00 mm
Post Swage: 15.85 CDD ± 0.15 mm
Note: Crimp down diameters (CDD) are for Fibron phosphor bronze hose end fittings for the Fibron ranges of diving hoses.
Fibron 1/2 inch #8 JIC Hose Fitting Swagable Phosphor - Bronze
The Fibrolite (FLT series) pneumo, gas and hot water hoses have an extruded polyurethane final finish (Fibroline with a thicker cover for greater robustness). These are typically used in surface demand / air dive applications.
Applications:
#8 JIC Hose fitting for 1/2 inch I.D. Fibron Fibrolite Umbilical Hoses
Specifications:
Hose Details:
Body Material: Swagable Phosphor - Bronze
Bore: 1/2 inch
Hose Type: Fibrolite
Hose Fitting: #8 JIC
Part Number: FLT08
O.D.: 18.50 mm
Max Working Pressure: 400 PSI
Ferrule O.D.:
Pre Crimp: 25.40 mm
Post Crimp: 22.00 CDD ± 0.20 mm
Note: Crimp down diameters (CDD) are for Fibron phosphor bronze hose end fittings for the Fibron ranges of diving hoses.
Fibron 3/8 inch #6 JIC Hose Fitting Swageable Phosphor-Bronze
Applications:
#6 JIC Hose fitting for 3/8 inch I.D. Fibron Fibrolite and Fibroflex Umbilical Hoses
Specifications:
Hose Details:
Bore (ID): 3/8 inch
Hose Type: Fibrolite, Fibroline and Fibroflex
Hose Fitting: #6 JIC
Part Number: FLT06/R - Fibrolite, FBL06 - Fibroline and FDH06 - Fibroflex
D.: FLT06/R - 17.50 mm, FBL06 - 18.50 mm FDH06 - 18.25 mm
Max Working Pressure: FLT06/R - 500 PSI, FBL06 - 500 PSI and 1000 PSI
Ferrule O.D.:
Body Material: Swageable Phosphor-Bronze
Pre Swage: 25.4 mm
Post Swage: FLT06/R - 21.5 CDD ± 0.20 mm, FBL06 - 23.0 CDD ± 0.20 mm and FDH06 - 21.8 CDD ± 0.15 mm
Note:
Crimp down diameters (CDD) are for Fibron phosphor bronze hose end fittings for the Fibron ranges of diving hoses.
FLT06R has a thicker sheath than FLT06 and associated larger OD. This became Fibrolite standard in Aug 2004.
Fibron 1/4 inch #4 JIC Hose Fitting Swagable Phosphor - Bronze
The Fibroline (FBL series) and Fibrolite (FLT series) pneumo, gas and hot water hoses have an extruded polyurethane final finish (Fibroline with a thicker cover for greater robustness). These are typically used in surface demand / air dive applications.
Applications:
#4 JIC Hose fitting for 1/4 inch I.D.Fibron Fibrolite and Fibroflex Umbilical Hoses
Specifications:
Hose Details:
Body Material: Swagable Phosphor - Bronze
Bore: 1/4 inch
Hose Type: Fibrolite or Fibriflex
Hose Fitting: #4 JIC
Part Number: FLT04
O.D.: 11.50 mm
Max Working Pressure: 400 PSI
Ferrule O.D.:
Pre Crimp: 19.00 mm
Post Crimp: 16.00 CDD ± 0.20 mm
Note: Crimp down diameters (CDD) are for Fibron phosphor bronze hose end fittings for the Fibron ranges of diving hoses.
Fibron 3/8 inch Oxygen Hose Fitting Swageable Phosphor-Bronze
Applications:
Oxygen Hose fitting for 3/8 inch ID Fibron Fibrolite, Fibroline and Fibroflex Umbilical Hoses
Specifications:
Hose Details:
Bore (ID): 3/8 inch
Hose Type: Fibrolite, Fibroline and Fibroflex
Hose Fitting: Oxygen
Part Number: FLT06/R - Fibrolite, FBL06 - Fibroline and FDH06 - Fibroflex
O.D.: FLT06/R - 17.50 mm, FBL06 - 18.50 mm FDH06 - 18.25 mm
Max Working Pressure: FLT06/R - 500 PSI, FBL06 - 500 PSI and 1000 PSI
Ferrule O.D.:
Body Material: Swageable Phosphor-Bronze
Pre Swage: 25.4 mm
Post Swage: FLT06/R - 21.5 CDD ± 0.20 mm, FBL06 - 23.0 CDD ± 0.20 mm and FDH06 - 21.8 CDD ± 0.15 mm
Note:
Crimp down diameters (CDD) are for Fibron phosphor bronze hose end fittings for the Fibron ranges of diving hoses
FLT06R has a thicker sheath than FLT06 and associated larger OD. This became Fibrolite standard in Aug 2004.
Note: Australian Standards AS2299.1 3.13.6 requires that the minimum breaking strength of any potential load bearing component of a diver’s umbilical or lifeline shall be at least 6kn (600kg). This umbilical meets that standard.
Application (All members are spiraled together):
DC0671 - Surface dive umbilicals for communication.
FBL04P - Pneumo hose
FBL06G - Hose delivers gas for the diver to breathe underwater.
Note: Fittings and terminations are not included
Featured:
Fibrolite hoses with optimized outer covers for air end use – for standard arduous worksites requiring normal abrasion.
High kink, abrasion and fatigue resistance
Custom-built and extremely flexible
Lightweight with balanced load distribution
Rope-like construction for easy handling and storage
Inherent strength braid in communications cable - no need for a dedicated rope
Color coding for different services
3 Part umbilical-Air, Pneumo and Comms/Strength Includes:
DC0671 Reinforced Two Pair Communication Cable Specifications:
Two each individually screen 0.5 mm2 plain copper twisted pairs
Screens comprise polyester/aluminium laminate tape and tinned copper drain wire
Fiber filler element
Vectran fiber braid
Solid filled polyurethane sheath with 1.7 mm nominal thickness
Standard Color: Red
FBL04P - 1/4 Inch NB Fibroline Pneumo Hose Specifications:
Hose Type: Fibrolite
Max Working Pressure: 500 PSI / 35 bar
Minimum Burst Pressure: 2500 PSI / 172 bar
Nominal Bore: 1/4 inch / 6.35 mm
Outside Diameter: 12.5 mm
Minimum Bend Radius (Operational): 82 mm
Weight in Air: 101 kg/km
Weight in Sea Water: -25 kg/km
Standard Color: Yellow
FBL06G - 3/8 Inch NB Fibroline Gas Hose Specifications:
Hose Type: Fibrolite
Max Working Pressure: 500 PSI / 35 bar
Minimum Burst Pressure: 4000 PSI / 276 bar
Nominal Bore: 3/8 inch / 9.53 mm
Outside Diameter: 18.5 mm
Minimum Bend Radius (Operational): 121 mm
Weight in Air: 227 kg/km
Weight in Sea Water: -49 kg/km
Standard Color: Blue
Note: Umbilical lengths are subject to +/- 2% over/under to the quoted length.
Note: Fittings and terminations are not included
Application (All members are spiraled together):
DCS0001 - Surface dive umbilicals for communication.
FLT04 - Hose delivers air to measure the diver's depth underwater.
FLT06 - Hose delivers air for the diver to breathe underwater.
C-2300C - Outland Video Cable
FLT08 - Hot Water Hose delivers heated water from the surface to the diver
Featured:
Tough, kink and abrasion resistant
Buoyant in sea and fresh water
Clean and odor free
Flexible and non-aging
5 Part umbilical-Air, Pneumo, Comms/Strength and Video/Light Includes:
DCS0001 Communication Cable Specifications:
Screened Pairs: 2 x 0.5 mm2
Polyester Strength Braid: 500 kg minimum break strength
Red polyurethane outer sheath: 1.7 mm nominal thickness
Weight in Air: 120 kg/km
Weight in Sea Water: 25 kg/km
O.D. mm: 11.0 mm
Standard Color: Red
FLT04 - 1/4 Inch Pneumo Hose Specifications:
Hose Type: Fibrolite
Max Working Pressure: 400 PSI / 27.5 bar
Minimum Burst Pressure: 1600 PSI / 110 bar
Nominal Bore: 1/4 inch / 6.3 mm
Outside Diameter: 11.5 mm
Weight in Air: 82 kg/km
Weight in Sea Water: -25 kg/km
Minimum Bend Radius (Static): 75 mm
Minimum Bend Radius (Dynamic): 115 mm
Tensile Rating: 100 kg
Standard Color: Yellow
FLT06 - 3/8 Inch Breathing Air Hose Specifications:
Hose Type: Fibrolite
Max Working Pressure: 500 PSI / 35 bar
Minimum Burst Pressure: 2000 PSI / 140 bar
Nominal Bore: 3/8 inch / 9.5 mm
Outside Diameter: 17.5 mm
Weight in Air: 193 kg/km
Weight in Sea Water: -53 kg/km
Minimum Bend Radius (Static): 105 mm
Minimum Bend Radius (Dynamic): 1160 mm
Tensile Rating: 100 kg
Standard Color: Blue
C-2300C - Outland Video Cable Specifications:
Small, rugged, “Orange cable”.
Replaces the C-1500, C-2000, C-2300 and C5500 cables.
Braided Kevlar strength member (1200 lbs)
Lengths to 3000 ft.
Material: Orange Polyurethane jacket.
Temp. rating -40 to +90C.
Diameter .380 inch
38 lbs.(17.5 kg) per 500 ft.
Conductors: 16 #22 awg and 1 mini RG-59 coax.
300 volt rated conductors.
FLT08 - 1/2 Inch Hot Water Hose Specifications:
Hose Type: Fibrolite
Max Working Pressure: 400 PSI / 27.5 bar
Minimum Burst Pressure: 1600 PSI / 110 bar
Nominal Bore: 1/2 inch / 12/.5 mm
Outside Diameter: 18.5 mm
Weight in Air: 167 kg/km
Weight in Sea Water: -109 kg/km
Minimum Bend Radius (Static): 120 mm
Minimum Bend Radius (Dynamic): 185 mm
Tensile Rating: 100 kg
Standard Color: Red
Note: Umbilical lengths are subject to +/- 2% over/under to the quoted length.
Note: Australian Standards AS2299.1 3.13.6 requires that the minimum breaking strain of any potential load bearing component of a diver’s umbilical or lifeline shall be at least 6kn (600kg). This umbilical does not meet that standard. Please contact your Amron sales representative for an alternate spiral umbilical that can meet this standard.
Note: Fittings and terminations are not included
Fibron 4 Part Umbilical that includes 1/4 in. Pneumo Hose, 3/8 inch Breathing Air Hose, Communications Cable and Video/Light Cable
Note: Fittings and terminations are not included
Application (All members are spiraled together):
DCS0001 - Surface dive umbilicals for communication.
FLT04 - Hose delivers air to measure the diver's depth underwater.
FLT06 - Hose delivers air for the diver to breathe underwater.
C-2300C - Outland Video Cable
Featured:
Tough, kink and abrasion resistant
Buoyant in sea and fresh water
Clean and odor free
Flexible and non-aging
4 Part umbilical-Air, Pneumo, Comms/Strength and Video/Light Includes:
DCS0001 Communication Cable Specifications:
Screened Pairs: 2 x 0.5 mm2
Polyester Strength Braid: 500 kg minimum break strength
Red polyurethane outer sheath: 1.7 mm nominal thickness
Weight in Air: 120 kg/km
Weight in Sea Water: 25 kg/km
O.D. mm: 11.0 mm
Standard Color: Red
FLT04 - 1/4 Inch Pneumo Hose Specifications:
Hose Type: Fibrolite
Max Working Pressure: 400 PSI / 27.5 bar
Minimum Burst Pressure: 1600 PSI / 110 bar
Nominal Bore: 1/4 inch / 6.3 mm
Outside Diameter: 11.5 mm
Weight in Air: 82 kg/km
Weight in Sea Water: -25 kg/km
Minimum Bend Radius (Static): 75 mm
Minimum Bend Radius (Dynamic): 115 mm
Tensile Rating: 100 kg
Standard Color: Yellow
FLT06 - 3/8 Inch Breathing Air Hose Specifications:
Hose Type: Fibrolite
Max Working Pressure: 500 PSI / 35 bar
Minimum Burst Pressure: 2000 PSI / 140 bar
Nominal Bore: 3/8 inch / 9.5 mm
Outside Diameter: 17.5 mm
Weight in Air: 193 kg/km
Weight in Sea Water: -53 kg/km
Minimum Bend Radius (Static): 105 mm
Minimum Bend Radius (Dynamic): 1160 mm
Tensile Rating: 100 kg
Standard Color: Blue
C-2300C - Outland Video Cable Specifications:
Small, rugged, “Orange cable”.
Replaces the C-1500, C-2000, C-2300 and C5500 cables.
Braided Kevlar strength member (1200 lbs)
Lengths to 3000 ft.
Material: Orange Polyurethane jacket.
Temp. rating -40 to +90C.
Diameter .380 inch
38 lbs.(17.5 kg) per 500 ft.
Conductors: 16 #22 awg and 1 mini RG-59 coax.
300 volt rated conductors.
Please see Product Ordering Information below.
The unique materials and cabled 'ropelike' construction combine to produce the most flexible, neutrally buoyant umbilicals available today. With no need to tape, much reduced repairs and longer life.
Unlike rubber or PVC compounds used in some commercial diving hoses, Fibron uses a particularly clean unfilled polymer containing no plasticizers or potentially harmful additives. This ensures breathing air gas quality is maintained under all conditions from -40°C to 60°C. Fibron diving umbilical hoses will not deteriorate significantly with age and remain flexible and abrasion resistant, thereby easily outlasting rubber and PVC type hoses.
Diving umbilicals in long, continuous lengths can be delivered. Standard lengths are 305m (1,000 ft.). Longer lengths are available upon request. The rugged abrasion resistant construction of Fibron diving umbilicals is ideal for surface supplied diving and can be incorporated with various electrical cables for compact, flexible diving umbilicals that are neutral or float in seawater.
Spiraling of diving umbilicals produces a unified flexible structure that allows components to realign when flexed, minimizing stresses induced by bending. No individual component is always on the inside or outside of the bend. This ensures the diving umbilicals are neither compressed nor stretched.
Note: Fittings and terminations are not included
Note: Umbilical lengths are subject to +/- 2% over/under to the quoted length.
Note: Australian Standards AS2299.1 3.13.6 requires that the minimum breaking strain of any potential load bearing component of a diver’s umbilical or lifeline shall be at least 6kn (600kg). This umbilical does not meet that standard. Please contact your Amron sales representative for an alternate spiral umbilical that can meet this standard.
FAQ's
All cables are sold with their connection?
No. The umbilical material pages listed on our website come un-terminated. Amron does list terminated umbilicals in limited configurations in the "Umbilicals" category of our web site. Also, if you wish to receive a price quote for terminated umbilicals, please request a price quote at https://www.amronintl.com/request-for-quote.
Hi,What is the hose made of? Thanks
Fibrolite Gas and hot water hoses : - Polyether based polyurethane liner - food grade. - 1 layer (all sizes) braided (open weave) polyester fibre reinforcement - Overall optimum polyurethane extruded cover
Fibron 3 Part Umbilical Material that includes 1/4 in. Pneumo Hose, 3/8 in. Breathing Air Hose and a Communications Cable.
Application (All members are spiraled together)
DCS0001 - Surface dive umbilicals for communication.
FLT04 - Hose delivers air to measure the diver's depth underwater.
FLT06 - Hose delivers air for the diver to breathe underwater.
Note: Fittings and terminations are not included
Amron sells many different diving umbilical configurations. Discounted umbilical material applies to continuous reel lengths of 2,001 feet./610 meters. If you don’t see the configuration you need, please contact us.
Featured
Tough, kink and abrasion resistant
Buoyant in sea and fresh water
Clean and odor free
Flexible and non-aging
3 Part umbilical-Air, Pneumo and Comms/Strength Includes
DCS0001 Communication Cable Specifications
Screened Pairs: 2 x 0.5 mm2
Polyester Strength Braid: 500 kg minimum break strength
Red polyurethane outer sheath: 1.7 mm nominal thickness
Weight in Air: 120 kg/km
Weight in Seawater: 25 kg/km
O.D. mm: 11.0 mm
Standard Color: Red
FLT04 - 1/4 Inch Pneumo Hose Specifications
Hose Type: Fibrolite
Max Working Pressure: 400 psi / 27.5 bar
Minimum Burst Pressure: 1600 psi / 110 bar
Outside Diameter: 11.5 mm
Weight in Air: 82 kg/km
Weight in Seawater: -25 kg/km
Minimum Bend Radius (Static): 75 mm
Minimum Bend Radius (Dynamic): 115 mm
Tensile Rating: 100 kg
Standard Color: Yellow
FLT06 - 3/8 Inch Breathing Air Hose Specifications
Max Working Pressure: 500 psi / 35 bar
Nominal Bore: 3/8 in. / 9.5 mm
Outside Diameter: 17.5 mm
Weight in Air: 193 kg/km
Weight in Seawater: -53 kg/km
Minimum Bend Radius (Static): 105 mm
Minimum Bend Radius (Dynamic): 1160 mm
Tensile Rating: 100 kg
Standard Color: Blue
Please see Product Ordering Information below.
The unique materials and cabled 'ropelike' construction combine to produce the most flexible, neutrally buoyant umbilicals available today. With no need to tape, reducing repairs and extending its life.
Unlike rubber or PVC compounds used in some commercial diving hoses, Fibron uses a particularly clean unfilled polymer containing no plasticizers or potentially harmful additives. This ensures breathing air gas quality is maintained under all conditions from -40°C to 60°C. Fibron diving umbilical hoses will not deteriorate significantly with age and remain flexible and abrasion resistant, thereby easily outlasting rubber and PVC type hoses.
Diving umbilicals in long, continuous lengths can be delivered. Standard lengths are 305m (1,000 ft.). Longer lengths are available upon request. The rugged abrasion resistant construction of Fibron diving umbilicals is ideal for surface supplied diving and can be incorporated with various electrical cables for compact, flexible diving umbilicals that are neutral or float in seawater.
Spiraling of diving umbilicals produces a unified flexible structure that allows components to realign when flexed, minimizing stresses induced by bending. No individual component is always on the inside or outside the bend. This ensures the diving umbilicals are neither compressed nor stretched.
Note: Umbilical lengths are subject to +/- 2% over/under to the quoted length.
Note: Australian Standards AS2299.1 3.13.6 requires that the minimum breaking strain of any potential load bearing component of a diver’s umbilical or lifeline shall be at least 6 kn (600 kg). This umbilical does not meet that standard. Please contact your Amron sales representative for an alternate spiral umbilical that can meet this standard.
No results match your search. Try removing a few filters.
