Diving

The Xstream 1st Stage Deep G5/8 in. regulator has a patented ruby ball seal that is automatically positioned by the floating seat which balances any upstream pressure equally with the pressure adjustment spring, maintaining the benefits of having a perfect ball as the sealing element. This makes the Xstream Range self-balancing, giving the same high performance, irrespective of the pressure in the cylinder. Added to this, the range has a built-in antifreeze protection in its construction. The TDA (Thermo Dynamic Antifreeze) ensures that the through-flowing water keeps the ice away, entirely without fluids or extra diaphragms.

Features

• Patented ruby ball seal that is automatically positioned by the floating seat which balances any upstream pressure equally with the pressure adjustment spring, maintaining the benefits of having a perfect ball as the sealing element.

• Self-balancing, giving the same high performance, irrespective of the pressure in the cylinder.

• Range has a built-in antifreeze protection in its construction.

• TDA (Thermo Dynamic Antifreeze) ensures that the through-flowing water keeps the ice away, entirely without fluids or extra diaphragms.

Specifications

• Gases: Air, nitrox, trimix, and heliox

• Connection: DIN G5/8 in.

• Ports:

  • 5 LP ports

  • 2 HP ports

• Flowrate (l/cu. ft. per min): 5500/194

• Safety Valve: Yes

• Separate Yoke: Accessory

• Technique: Rolling diaphragm

• Thermodynamic Anti-Freeze Protection: Yes

• Valve Technique: Spheric

• Wheel Mount: Side

• Zytel HP Seat: Yes

• Weight: 750 g

• Material: Chrome plated brass construction

MS3108B-18-08P Includes

• Right angle 8-pin MS-style connector shell with clamp*

*Note: This item is no longer sold with a bushing. Bushings may be purchased separately depending on the size of your video cable. Bushings are used to reduce friction and provide strain-relief, wear and tear to the cable.  

There are three recommended Bushing options

• P/N: MS-3420-8 - Bushing for cables up to .437 in. diameter (recommended for use with Outland C-2300 video cable).

• P/N: MS-3420-10 - Bushing for cables up to .562 in. diameter.

• P/N: MS-3420-6 - Bushing for cables up to .312 in. diameter (needs to be purchased with the MS-3420-8 bushing for nesting and proper fitting inside the MS3108B-18-08P shell and clamp).

Outland Technology's UWC-330 Underwater Dive Camera, the HD version of a diver's favorite. This high-definition (1080P) fixed-focus camera is specifically crafted for underwater exploration, delivering exceptional clarity and reliability.

Choose between the lightweight delrin housing for optimal maneuverability or the durable stainless steel housing for maximum protection in challenging conditions. The UWC-330's fixed-focus lens eliminates the need for constant adjustments, allowing divers to focus on capturing the moment effortlessly.

Elegantly designed and housed in a rugged casing, the UWC-330 is the go-to dive camera for both professionals and enthusiasts. Dive into the depths with confidence, capturing the wonders of the underwater world in stunning detail. Outland Technology's UWC-330 Dive Camera – where HD meets durability for unparalleled underwater experiences.

Applications

• Helmet mount

• Manipulator arm (ROV)

• Hand-held

• Drop camera

 Features

• High definition

• Durable, corrosion-free housing

• Color

• Compact size

 Specifications

• Body Materials:

  • Stainless Steel

  • Black Delrin

• Video Formats:

  • NTSC (U.S.)

  • PAL (Europe & Asia)

• Mechanical:

  • Diameter: 1.62 in. (41 mm)

  • Length (excluding connector): 5 in. (127 mm)

  • Weight in Air: 9.8 oz. (0.28 kg)

  • Weight in Seawater: 3.1 oz. (0.09 kg)

  • Depth Rating: 6560 ft. (2000 m)

  • Housing Material: Delrin

  • Port Material: Acrylic

• Camera Properties:

  • Image Device: 1/2.7 in. 2MP CMOS (1933 H x 1088 V pixels)

  • Sensitivity: 1.3 lux @ F2.0

  • Resolution: Up to 1933x1088

  • Lens: 3.6 mm, F2.0

  • Focus: Fixed

  • Horizontal FOV (in water): 70 degrees

  • Standard Format: PAL

• Electrical:

  • Input Voltage 12-24 VDC

  • Power 90 mA @ 12 VDC

• Connector:

  • Standard Connector (included): OTI-XSK-5-BCL

  • Mate for Standard Connector (not included): RMK-5-FS

  • Locking Sleeve (not included): K-FLS-D

Note: This will not work with Standard Definition recorders or video systems. Currently limited to 150 m cable transmission or 300 m with post amp.

Explore the depths with Outland Technology's UWC-325 Dive Camera, a favored choice among divers. This underwater camera delivers stunning Standard Definition (SD) images at 480i resolution, capturing the beauty beneath the waves with ease. Its fixed focus ensures hassle-free operation, allowing you to focus on your underwater adventures.

Choose between the lightweight Delrin housing for optimal maneuverability or the durable stainless steel housing for maximum protection in challenging conditions. Distinguished by its sleek and durable housing, the UWC-325 Dive Camera is built to withstand the challenges of underwater environments. Whether you're navigating coral reefs or exploring dark caverns, this camera is your reliable companion for deep-sea exploration.

Choose the UWC-325 Camera by Outland Technology for a seamless blend of simplicity and reliability, ensuring an extraordinary underwater experience that's optimized for capturing and sharing your underwater adventures.

Features

• Stainless steel or delrin housing options

• Standard definition

• Color

• Compact size

 Uses Include

• Helmet mount

• Manipulator arm

• Hand-held

• Drop camera

 Specifications

Mechanical Specifications

• Diameter: 1.62 in. (41 mm)

• Length (Excluding Connector): 5 in. (127 mm)

• Weight in Air (SS): 1.23 lbs. (0.56 kg)

• Weight in Seawater (SS): 0.63 lbs. (0.28 kg)

• Weight in Air (Plastic): 1.77 lbs. (0.24 kg)

• Weight in Seawater (Plastic): 0.11 lbs. (0.05 kg)

• Depth Rating: 6560 ft. (2000 m)

• Housing Material: 316 stainless steel or delrin

• Port Material: Acrylic (options available)

 Camera Specifications

• Image Device: .5 in. Sony sensor

• Sensitivity (BW): 0.0008 lux

• Sensitivity (Color): 0.017 lux

• Resolution: SD 4:3

• Focus: Fixed

• Horizontal FOV (in Air): ~60°

• Standard Format: NTSC

• Signal Type: Composite analog

 Electrical Specifications

• Input Voltage: 10-24 VDC

• Power: 135 mA (typical) @ 12 VDC

 Connectors

• Standard Connector: OTI-XSK-5-BCL

• Mate for Standard Connector: OTI-RMK-5-FS

Options

• 1. PAL format

• 2. Port material

• 3. Housing material

Interspiro Head Harness - Black NR/CR - P/N: 460-190-457

Note: P/N: 460-190-457 Head Harness replaces Head Harness P/N: 460-190-520.

The Amron International Model 3114 Talk Back Speaker is encased in a die-cast housing with a stainless steel front panel. Speaker is 8 watts, 8 ohms. Frequency Range: 250 Hz - 10,000 Hz. Input connection: 3 ft. SJO cable, 18 AWG. Housing is die-cast zinc with gray epoxy powder coat, with a 300 series stainless steel front panel.

DISCLAIMER NOTICE: Amron's communications equipment is designed to be used in air chambers where oxygen concentrations remain below 23.5%. Our communications products (including communicators, speakers, entertainment systems, and other communications accessory items) are NOT designed for oxygen service, are not intrinsically safe, and do not meet the criteria given in NFPA-99, Chapter 20 and other applicable definitions. Use of our products in high-concentration Oxygen environments may result in serious injury and/or death.

Specifications

• 8 Ω

• Voice Range: 8 watts

• Frequency Range: 250 Hz – 10,000 Hz

• Input Connection: 3 ft. SJO cable, 18 AWG

• Material:

  • Housing: Die-cast zinc with gray powder coat

  • Front Panel: 300 series stainless steel

• Height: 4.25 in. (10.8 cm)

• Width: 5.5 in. (14 cm)

• Depth 2 in. (5.1 cm)

• Weight: 5 lb. (2.3 kg)

Features

• Touch switch with 6-level light intensity dimmer.

• Long-lasting LED technology (50,000 hour life).

• Frosted lens for diffuse lighting.

• Compact, low profile design.

• Mounting plate can be rotated to orient connector & switch.

• Low heat, high-performance heat sink.

• Vented design requires no pressure relief valve.

• 3-pin wiring (V+, V-, Safety GND).

• 3-pin Marsh Marine style connector (mates with RMG-3-FS).

• Optional magnetic base (P/N: 540-0021-01).

• Optional lens filters - Red (P/N: 245-0003-01) and Blue (P/N: 245-0004-01).

 Dimensions

• Height: 2.6 in. (67 mm)

• Body Diameter: 3.3 in. (84 mm)

• Mounting Plate: 4.5 in. dia. (114 mm)

• Weight: 1.50 lbs. (0.68 kg)

• Mounting Holes: 2x 0.25 in. (6.35 mm) dia. with 3.82 in. (97 mm) spacing

 Electrical Specifications

• Lamp Type: Bright white LED (5000K)

• Operating Voltage Range: 9-28 VDC

• Input Power: 15 watts (max.)

• Beam Angle: 120°

• Light Level: Adjustable - 1000 lumens (max.)

 Electrical Connection

• Male 3-Pin Marsh Marine (RMG-3-MP style equivalent)

• Mating Connector / Cable Options:

  • RMG-3-FS Marsh Marine (not included)

  • WPC-3-FS-10 Low Smoke Zero Halogen Cable (not included)

• Mating Connector Locking Sleeve Options:

  • Delrin G-FLS-D Marsh Marine (not included)

  • Stainless Steel G-FLS-S Marsh Marine (not included)

 Other Specifications

• Lens: Borosilicate glass (frosted)

• Housing: 6061 aluminum

• Finish: Black hard anodized (MIL-A-8625, Type III Class 2)

• Pressure Rating: 1000 FSW (300 MSW)

The Model H203-U Sound Powered Phone with unterminated coiled retractable cord provides safe, reliable transmission for chamber communications. The Model H203 Sound Powered Phone generates signal from sound waves, no electrical power required. Comes with 6 feet of extended coiled retractable cord.

Note: Phone cord and plate color/material are subject to change without notice.

Features:

• Safe and reliable transmission for chamber communications

• Generates signal from sound waves, no electrical power required

Specifications:

• Height: 9 in. (22.8 cm)

• Width: 2.30 in. (5.84 cm)

• Depth: 4 in. (10.1 cm)

• Coil Cable Length: 36 in. (91.44 cm)

• Weight: 2 lbs. 6 oz. (21 kg)

FAQ's

Will the SPT-550RC Sound Powered Phone work with the model H203-XX Sound Powered Phone?

Yes.

Does the Sound Powered Phone have a ringer?

No.

What´s the difference between model SPT-550RC and this one ?

The H203-U is manufactured to be more durable and is heavier than the SPT-550RC.

Used for Diver Umbilical Comms

RMG-4-FS In-Line Rubber Molded Connector - 4 female sockets with 24 in. pigtail of 18 AWG SJOOW cable. This Marsh Marine-style connector is intermateable between brands in this RMG-4 category.

Applications

• Diver umbilical communications, underwater cameras, lighting systems, and instrumentation.

Specifications

• Material: Special neoprene, molded

• Contacts: Copper alloy-gold plated per ASTM-B-488

• Voltage Rating: 300 VDC

• Pressure Rating: Up to 20,000 PSI

• Cable: 18/4 AWG SJOOW

• Cable Length: 24 in.

FAQ's

Why is the SJO cable on the RMG-4-FS only rated to 300 volts when the other RMG connectors are rated to 600 volts?

Amron had to use a SJO cable with a thinner walled jacket to allow the cable to be used with the commercial diving helmet penetrator and diving umbilical.

After I solder my RMG waterproof connector to my umbilical, how do I waterproof the connection?

Amron recommends using an 82-F1 inline splice kit to waterproof your RMG to umbilical connection. We chose this resin because it’s semi-flexible and extremely durable in the harsh underwater environment.

Amron Low-Pressure Hose Assembly for AGA Divator MK II Full Face Mask - 30 in. 5/16 in. ID Hose LP5-AGAF-O2M-30

Application

• Low pressure hose assembly to be used in conjunction with the AGA Divator MK II Full Face Mask and umbilical with female O2 fitting.

 Specifications

• Hose Type: Low pressure hose 30 in. 5/16 in. ID

• Working Pressure: 400 PSI / 27.6 bar

• Minimum Burst Pressure: 2000 PSI / 137.9 bar

• Listed on the SEA 00C3 Authorization for Navy Use (ANU) Program list, 
  Category 2.2.9 MK 20 Umbilical to Mask Hose Assembly

 Fittings

• AGA Divator MK II Full Face Mask female swivel fitting with o-ring.

• 9/16-18 Male O2 swivel fitting connects with umbilical O2 fitting.

• Made from brass, plated with Hi-phosphorus electroless nickel or copper, nickel, chrome.

 Tests

• Tested to EN250: 2014 standards.

• Certificate available upon request.

Viking Inflator Hose for Pro / Protech / HD / Haztech Suits

Low pressure hose

Length: 29.5 inches

Connection: CEJN connector

Specifications

• Materials:

  • O-Ring: Viton®

  • Body: Naval brass

• Temperature: −20° F to +400° F (-29°C to +204°C)

• Valve Size: ⅜ in.

• Inlet Connections: Male pipe & lockwire

• Set Pressure: 300 psi

This valve has been tested in accordance with procedures in Paragraph UG 131, Section V111 of the ASME Unified Pressure Vessel Code: ASME Certificate of Authorization, Number 4599. This valve is not certified for steam or liquid service and is intended for air service applications only.

IMPORTANT: The ASME requires that valves be set at a “pop point." The ASME refers to this as the set pressure. This point is higher than the traditional Circle Seal Controls definition of cracking pressure.

NOTE: After a prolonged period of storage with no system pressure, this relief valve will evidence an apparent high set pressure on first pop; therefore, in receiving inspection tests, true set pressure should be determined after first pop.

FOR YOUR SAFETY: It is solely the responsibility of the system designer and user to select products suitable for their specific application requirements and to ensure proper installation, operation, and maintenance of these products. Material compatibility, product ratings, and application details should be considered in the selection. Improper selection or use of products described herein can cause personal injury or property damage.

Specifications

• Accuracy: 0.25% full scale (calibration certification included)

• Product Type: Pneumo depth gauge

• Dial Size: 6 in. (external zero adjust included)

• Pointer Type: Test (knife-edged, precision reading)

• Mirror Band: Yes

• Pointer Dampening: Yes

• External Zero Adjust: Yes

• Pressure Range: 250 FSW / 76 MSW

• Color: Black

• Dial Trim Material: Stainless steel

• Fitting Position: Rear

• Fitting Type: 1/4 in. NPT

• Front flange

Specifications

• Series: F

• Material: Brass

• Thread Size: 3/8 in. MNPT

• Socket Size: 3/8 in.

• Maximum Operating Pressure: 3,000 PSI

• Seal Material: BUNA

• Oxygen Cleaned IAW MIL-STD-1330 & CGA G4.1

 Compatible with

• Dummy Plug for Exhaust Quick Disconnect, Brass - P/N: B-6QDP

• BIBS Brass Manifold, 4-Port, with 1/4 in. & 3/8 in. MNPT Plugs - P/N: 8000-004

• BIBS Brass Manifold, 2-Port, with 1/4 in. & 3/8 in. MNPT Plugs - P/N: 8000-002

• Exhaust Hose Plug, 3/8 in. Barb x 3/8 in. Plug, Brass - P/N: 59852-00

• Hose Clamp, 3/16 in. Stainless Steel - P/N: MLT2S-CP

FAQ's

Is this the female quick disconnect that is used with the Amron and Avox BIBS Masks?

Yes. 

What size is the thread on the 59853-00 quick disconnect?

3/8 inch NPT.

What is the maximum pressure for P.N. 59853-00 Oxygen Cleaned Quick Disconnect Socket - Brass?

2,700 PSI

The Amron International 8000-004 Chamber BIBS Manifold Block was designed to operate with up to four Oxygen BIBS Masks. The BIBS Manifold Block is made of high quality brass and has a working pressure up to 1800 PSI. For systems that require more than four masks, multiple manifolds can be installed in series. The manifold is supplied with a 1/4 in. and 3/8 in. female NPT plug.

Features

• Designed to operate with up to four Oxygen BIBS Masks. 

• Includes 4 supply ports and 4 exhaust ports for a maximum of 4 Oxygen BIBS Masks with overboard discharge.

• Unit is supplied with 1/4 in. and 3/8 in. Female NPT plugs (qty. 4 each plug size).

Specifications

• Maximum Working Pressure: 1800 PSI

• Supply Ports: 1/8 in. Female NPT (4)

• Exhaust Ports: 3/8 in. Female NPT (4)

• Manifold Supply Connection: 1/4 in. Female NPT

• Manifold Exhaust Connection: 3/8 in. Female NPT

• Supply Passage Inside Diameter: 0.422 in.

• Exhaust Passage Inside Diameter: 0.562 in.

• Mounting Holes: 1/4-20 UNC-2B (2) 

• Dimensions:

  • Height: 2.5 in. (6.4 cm)

  • Width: 7.88 in. (20 cm)

  • Height: 1.25 in. (3.2 cm)

• Weight: 6.25 lbs. (2.8 kg)

• Enclosure: Brass

Note: For requirements of more than 4 masks, the manifolds can be installed in series.

FAQ's

Is the BIBS Manifold Block oxygen clean?

No. However, if you require the BIBS Manifold Block to be oxygen cleaned, please contact your Left Surface representative for a written quote.

What is the safe working pressure for the BIBS Manifold Block?

1800 PSI

What is the threaded hole in the center of my Chamber BIBS Manifold Block used for?

This is an accessory mounting hole used to attach the lanyard from the B-6QDP Brass Plug to the Chamber BIBS Manifold Block. The threaded hole accepts a 6-32 UNC screw.

The Amron International 18969-00 Oxygen Cleaned Quick Disconnect Socket is designed for Oxygen use in a hyperbaric environment. The fitting incorporates a self-sealing feature for the purpose of automatically shutting off the flow of gas when disconnected from its mating half.

Specifications

• Quick Disconnect Socket Size: 1/4 in. (female)

• Thread Size: 1/8 in. MNPT

• Oxygen cleaned & packaged

• Working Pressure: 300 PSI

• Materials:

  • Brass body and valve

  • Stainless steel spring and locking balls

• Color Coded: Green for Oxygen service

FAQ's

Is this the female quick disconnect that is used with the Amron and Avox BIBS Masks?

Yes. 

What size is the thread on this quick disconnect?

1/8 inch NPT. 

Specifications

• Type: 5-contact female socket on one end

• Cable: 24 in. pigtail 5-conductor 18 AWG SOOW cable

• Material: Neoprene rubber

• Contacts: Gold-plated

• Voltage Rating: 600 VDC-contact factory for higher voltage requirements

• Pressure Rating, Mated: Up to 20,000 psi (1370 bar = 13,700 m water depth)

• Mates With: RMK-5-MP, RMK-5-MPD, RMK-5-MPD-HP, XSK-5-BCL, RMK-5-BCL

• Locking Sleeves: Female K-FLS-D, Male K-MLS-D (purchased separately)

• Larger profile than RMG and VMG

The RMG-3-MP In-Line Rubber Molded Connector - 3 Pin Male with 18 SO AWG Cable. Other typical uses are for underwater cameras, lighting systems, instrumentation.

Applications

• Underwater cameras, lighting systems and instrumentation.

 Specifications

• Material: Special neoprene, molded

• Contacts: Copper alloy-gold plated per ASTM-B-488

• Voltage Rating: 600 VDC

• Pressure Rating: Up to 20,000 PSI

• Cable: 18/3 AWG SO

• Cable: 24 in.

The RMG Dummy Connectors are manufactured in both Low Pressure (LP) and High Pressure (HP). Instead of a cable, it is solid rubber on the end (about 3 in. long rubber).

Features

• Standard rubber molded dummy connector

• Mated Pressure Rating: 20,000 psi (male pin contact required) or < 4,000 PSI (male pin contact not required)

• Female socket

• Number of Contacts: 3

• Mates with: RMG-3-MP and XSG-3-BCL

• Locking Sleeve:  G-FLS-D

 Specifications

• Material: Special neoprene, molded

• Voltage Rating: 600 VDC-contact factory for higher voltage requirements

The Rubber Molded Dummy Connector mates with RMG-3-FS.

Features

• Standard rubber molded dummy connector

• Low pressure

• Mates with: RMG-3-FS

 Specifications

• Material: Special neoprene, molded

RMG-3-FS In-Line Rubber Molded Connector - 3 Socket Female with 18/3 SOOW cable. This Marsh Marine style connector is inter-mateable between brands in this RMG-3 category.

Applications

• Underwater cameras, lighting systems, and instrumentation.

 Specifications

• Material: Special neoprene, molded

• Contacts: Copper alloy-gold plated per ASTM-B-488

• Voltage Rating: 600 VDC

• Pressure Rating: Up to 20,000 PSI

• Cable: 18/3 AWG SOOW

• Cable Length: 24 in.

• Mating Connectors: RMG-3-MP, RMG-3-MPD (dummy), RMG-3-BCL (bulkhead)

• Locking Sleeves: G-FLS-D (delrin), G-FLS-S (stainless steel)

Amron 5/16 in. ID Low Pressure Breathing Air Hose for Divers with Customizable Diver and Supply Fittings - Price per Inch

Applications

• Diving

• Low pressure air breathing hose assemblies

• Bailout whips

• Emergency gas supply hose (EGS)

 Specifications

• Hose Type: Low pressure hose, 5/16 in. ID

• Working Pressure: 400 PSI / 27.6 bar

• Minimum Burst Pressure: 2000 PSI / 137.9 bar

• Nominal Bore: 0.290 in. to 0.330 in. / 7.37 mm to 8.38 mm

• Outside Diameter: 0.540 in. to 0.566 in. / 13.72 mm to 14.38 mm

• Temperature Range: -40°F to +190°F / -40°C to +88°C

• Weight: 9.6 lbs. per 100 ft. of hose

• Standard Color: Black

 Hose Construction

• Tube: Black odorless nitrile rubber

• Reinforcement: Single braid synthetic yarn

• Cover: Black neoprene rubber

 Fittings

• Fitting Types:

  • 9/16-18 female swivel X 5/16 barb

  • AGA female swivel X 5/16 barb

  • 1/4 male NPT X 5/16 barb

  • 3/8-24 male X 5/16 barb

  • Oxygen male x 5/16 barb

• Made from brass

• Plated with hi-phosphorus electroless nickel OR copper, nickel, chrome

RMG-4-MP In-Line Rubber Molded Connector - 4 Pin Male connector

Applications

• A male connector is typically installed on helmets/masks and mates with a female connector on a diver communications cable/umbilical.

• Underwater cameras, lighting systems, and instrumentation.

 Specifications

• Material: Special neoprene, molded

• Contacts: Copper alloy gold-plated per ASTM-B-488

• Voltage Rating: 300 VDC

• Pressure Rating: Up to 20,000 PSI

• Cable: 18/4 AWG SJOOW

• Pigtail Length: 24 in.

• Mating Connector: RMG-4-FS or RMG-4-FSD (dummy)

• Locking Sleeve: G-MLS-D (Delrin®) or G-MLS-S (stainless steel)

 FAQ's

Why is the SJO cable on the RMG-4-MP only rated to 300 volts when the other RMG connectors are rated to 600 volts?

Amron had to use a SJO cable with a thinner walled jacket to allow the cable to be used with the commercial diving helmet penetrator.

DISCLAIMER NOTICE: Left Surface reserves the option to supply this style from multiple manufacturers. If you prefer a particular manufacturer, please let your salesperson know before ordering.

Interspiro Service Kit for Divator Breathing Valve with Safety Pressure 460-190-904

InterspiroService Kit for Divator Breathing Valve with Safety Pressure includes:

• (1) Diaphragm unit MK II P/N: 336-190-360

• (1) Valve insert Sub Assembly without Safety Pressure P/N:97083-51

• (1) Non Return Valve Assembly P/N: 460-190-559

• (1) O-Ring POS 7 P/N: 346-190-198

• (1) O-Ring POS 6 P/N: 99486-01

• (1) O-Ring POS 5 P/N: 331-900-064

• (1) O-Ring POS 10 P/N: 336-900-008

• (1) Lever Assembly P/N: 336-190-142

Interspiro Service Kit for Divator Breathing Valve with Safety Pressure supports the following:

• Divator MK II Full Face Mask with Positive Pressure Regulator - Silicone - Yellow P/N: 96319-02

• Divator MK II Full Face Mask with Positive Pressure Regulator - Natural Rubber - Grey P/N: 96319-04

• Divator MK II Full Face Mask with Positive Pressure Regulator - Silicone - Black P/N: 96319-06

• Divator Mask Si Hatch with Safety Pressure, Breathing Valve Included - Yellow P/N: 96319-15

• Divator Valve Housing with Positive Pressure - Black P/N: 336-101-158

• Divator Cover with Purge Button - Black P/N: 460-190-518

This service part kit is intended for component-level maintenance of the DIVATOR Full Face Mask. The service part kit contains the required soft rubber parts that are listed on the Specs tab. The replacement of the parts shall be done according to the instructions in the DIVATOR Service and Repair manual for the DIVATOR Full Face Mask unit - IS-document # 30 930 - Divator service and repair manual.

NOTE: Service on the Divator Full Face Mask and Breathing Valve shall only be carried out by a qualified service technician carrying a valid Interspiro service certificate.

This service part kit is intended for component-level maintenance of the DIVATOR Full Face Mask. The service part kit contains the required soft rubber parts that are listed below. The replacement of the parts shall be done according to the instructions in the DIVATOR Service and Repair manual for the DIVATOR Full Face Mask unit - IS-document # 30 930 - Divator service and repair manual.

Service Part Kit for Divator Mask (460-200-503) - Breathing Valve Includes

• Non-return valve disc - 2 x P/N: 331-100-791

• O-ring for the cover - 1 x P/N: 944-610-221

• O-ring lever assembly (to be used for safety pressure and octopus valve only) - 1 x P/N: 336-900-001

• Non-return valve assembly - 1 x P/N: 336-190-332

• *O-ring mask connection -1 x P/N: 336-900-008

• Sealing sleeve - 1 x P/N: 336-100-019

• O-ring, inner - 1 x P/N: 331-900-064

• O-ring, outer - 1 x P/N: 99-486-01

• Balancing diaphragm - 1 x P/N: 331-100-641

• Valve cone assembly - 1 x P/N: 336-190-064

• Exhalation diaphragm, natural rubber (as per product bulletin 30417A01, January 2009) - 1 x P/N: 30-005-01

• Diaphragm - 1 x P/N: 336-100-009

• O-ring - 1 x P/N: 336-900-009

• O-ring - 1 x P/N: 944-610-206

• O-ring (for regulator hose 3/8" fitting) - 1 x P/N: 336-900-099

*WARNING: This O-ring must not be fitted to a breathing valve with a mouthpiece.

Interspiro Service Kit for Divator Breathing Valve without Safety Pressure 460-190-902

Interspiro Service Kit for Divator Breathing Valve without Safety Pressure includes:

• (1) Diaphragm unit MK II P/N: 336-190-360

• (1) Valve insert Sub Assembly without Safety Pressure P/N: 97083-51

• (1) Non Return Valve Assembly P/N: 460-190-559

• (1) O-Ring POS 7 P/N: 346-190-198

• (1) O-Ring POS 6 P/N: 99486-01

• (1) O-Ring POS 5 P/N: 331-900-064

• (1) O-Ring POS 10 P/N: 336-900-008

Interspiro Service Kit for Divator Breathing Valve without Safety Pressure supports the following:

• Divator MK II Full Face Mask with Demand Regulator - Silicone - Black P/N: 96319-05

• Divator MK II Full Face Mask with Demand Regulator - Silicone - Yellow P/N: 96319-01

• Divator MK II Full Face Mask with Demand Regulator PR - Silicone - Black P/N: OTS-900157-008

• Divator Breathing Valve Assembly w/o Positive Pressure - Black P/N: 336-101-150

3/4 IN #12 JIC HOSE FITTING

Applications:

• #12 JIC Hose fitting for 3/4 inch I.D. Cortland Fibrolite and Fibroflex Umbilical Hoses

Specifications:

• Hose Details:

  • Bore (ID): 3/4 inch

  • Hose Type: Fibrolite, Fibroline and Fibroflex

  • Hose Fitting: #12 JIC

  • Part Number: FBL12

  • O.D.: 30.60 MM

  • Max Working Pressure: 500 PSI

• Ferrule O.D.:

  • Body Material: Swageable Phosphor-Bronze

  • Pre Crimp: 39.60 mm

  • Post Crimp: 33.20 CDD ± 0.20 mm

Cortland 1/2 inch #8 JIC Hose Fitting Swagable Phosphor - Bronze

The Fibroline (FBL series) and Fibrolite (FLT series) pneumo, gas and hot water hoses have an extruded polyurethane final finish (Fibroline with a thicker cover for greater robustness). These are typically used in surface demand / air dive applications.

Applications:

• #8 JIC Hose fitting for 1/2 inch I.D. Cortland Fibrolite and Fibroflex Umbilical Hoses

Specifications:

• Hose Details:

  • Body Material: Swagable Phosphor - Bronze

  • Bore: 1/2 inch

  • Hose Type: Fibrolite and Fibroflex

  • Hose Fitting: #6 JIC

  • Part Number: FLT06R*

  • O.D.: 18.50 mm

  • Max Working Pressure: 400 PSI

• Ferrule O.D.:

  • Pre Crimp: 25.40 mm

  • Post Crimp: 20.00 CDD ± 0.20 mm

• Note: Crimp down diameters (CDD) are for Cortland phosphor bronze hose end fittings for the Cortland ranges of diving hoses.

Fibron 1/4 inch Oxygen Hose Fitting Swagable Phosphor - Bronze

The Fibroflex pneumo, gas and hot water hoses (FDH series), light-weight collapse and recover (C/R) reclaim (FRH series) and non-collapse reclaim hoses (FXH series), all have a fibre braided final finish. These are typically used in both main services umbilicals and bell excursion umbilicals.

Applications:

• Oxygen Hose fitting for 1/4 inch ID Fibron Fibrolite and Fibroflex Umbilical Hoses

Specifications:

• Hose Details:

  • Body Material: Swagable Phosphor - Bronze

  • Bore: 1/4 inch

  • Hose Type: Fibroflex and Fibrolite

  • Hose Fitting: Oxygen

  • Part Number: FDH04

  • O.D.: 11.90 mm

  • Max Working Pressure: 1000 PSI

• Ferrule O.D.:

  • Pre Swage: 19.00 mm

  • Post Swage: 15.85 CDD ± 0.15 mm

• Note: Crimp down diameters (CDD) are for Fibron phosphor bronze hose end fittings for the Fibron ranges of diving hoses.

Fibron 1/2 inch #8 JIC Hose Fitting Swagable Phosphor - Bronze

The Fibrolite (FLT series) pneumo, gas and hot water hoses have an extruded polyurethane final finish (Fibroline with a thicker cover for greater robustness). These are typically used in surface demand / air dive applications.

Applications:

• #8 JIC Hose fitting for 1/2 inch I.D. Fibron Fibrolite Umbilical Hoses

Specifications:

• Hose Details:

  • Body Material: Swagable Phosphor - Bronze

  • Bore: 1/2 inch

  • Hose Type: Fibrolite

  • Hose Fitting: #8 JIC

  • Part Number: FLT08

  • O.D.: 18.50 mm

  • Max Working Pressure: 400 PSI

• Ferrule O.D.:

  • Pre Crimp: 25.40 mm

  • Post Crimp: 22.00 CDD ± 0.20 mm

• Note: Crimp down diameters (CDD) are for Fibron phosphor bronze hose end fittings for the Fibron ranges of diving hoses.

Fibron 3/8 inch #6 JIC Hose Fitting Swageable Phosphor-Bronze

Applications:

• #6 JIC Hose fitting for 3/8 inch I.D. Fibron Fibrolite and Fibroflex Umbilical Hoses

Specifications:

• Hose Details:

  • Bore (ID): 3/8 inch

  • Hose Type: Fibrolite, Fibroline and Fibroflex

  • Hose Fitting: #6 JIC

  • Part Number: FLT06/R - Fibrolite, FBL06 - Fibroline and FDH06 - Fibroflex

  • D.: FLT06/R - 17.50 mm, FBL06 - 18.50 mm FDH06 - 18.25 mm

  • Max Working Pressure: FLT06/R - 500 PSI, FBL06 - 500 PSI and  1000 PSI

• Ferrule O.D.:

  • Body Material: Swageable Phosphor-Bronze

  • Pre Swage: 25.4 mm

  • Post Swage: FLT06/R - 21.5 CDD ± 0.20 mm, FBL06 - 23.0 CDD ± 0.20 mm and FDH06 - 21.8 CDD ± 0.15 mm

Note:

• Crimp down diameters (CDD) are for Fibron phosphor bronze hose end fittings for the Fibron ranges of diving hoses.
  

• FLT06R has a thicker sheath than FLT06 and associated larger OD. This became Fibrolite standard in Aug 2004.

Fibron 1/4 inch #4 JIC Hose Fitting Swagable Phosphor - Bronze

The Fibroline (FBL series) and Fibrolite (FLT series) pneumo, gas and hot water hoses have an extruded polyurethane final finish (Fibroline with a thicker cover for greater robustness). These are typically used in surface demand / air dive applications.

Applications:

• #4 JIC Hose fitting for 1/4 inch I.D.Fibron Fibrolite and Fibroflex Umbilical Hoses

Specifications:

• Hose Details:

  • Body Material: Swagable Phosphor - Bronze

  • Bore: 1/4 inch

  • Hose Type: Fibrolite or Fibriflex

  • Hose Fitting: #4 JIC

  • Part Number: FLT04

  • O.D.: 11.50 mm

  • Max Working Pressure: 400 PSI

• Ferrule O.D.:

  • Pre Crimp: 19.00 mm

  • Post Crimp: 16.00 CDD ± 0.20 mm

• Note: Crimp down diameters (CDD) are for Fibron phosphor bronze hose end fittings for the Fibron ranges of diving hoses.

Fibron 3/8 inch Oxygen Hose Fitting Swageable Phosphor-Bronze

Applications:

• Oxygen Hose fitting for 3/8 inch ID Fibron Fibrolite, Fibroline and Fibroflex Umbilical Hoses

Specifications:

• Hose Details:

  • Bore (ID): 3/8 inch

  • Hose Type: Fibrolite, Fibroline and Fibroflex

  • Hose Fitting: Oxygen

  • Part Number: FLT06/R - Fibrolite, FBL06 - Fibroline and FDH06 - Fibroflex

  • O.D.: FLT06/R - 17.50 mm, FBL06 - 18.50 mm FDH06 - 18.25 mm

  • Max Working Pressure: FLT06/R - 500 PSI, FBL06 - 500 PSI and 1000 PSI

• Ferrule O.D.:

  • Body Material: Swageable Phosphor-Bronze

  • Pre Swage: 25.4 mm

  • Post Swage: FLT06/R - 21.5 CDD ± 0.20 mm, FBL06 - 23.0 CDD ± 0.20 mm and FDH06 - 21.8 CDD ± 0.15 mm

Note:

• Crimp down diameters (CDD) are for Fibron phosphor bronze hose end fittings for the Fibron ranges of diving hoses

• FLT06R has a thicker sheath than FLT06 and associated larger OD. This became Fibrolite standard in Aug 2004.

The OCEAN REEF GSM CUBE3 is an Underwater Communication Unit capable of operating wireless/hardwired or interfaced with a VHF radio - 3 units in one. If the unit is connected to the Alpha Pro X-DIVERS surface unit via a cable, then communication is in full duplex mode with the surface unit (no need to press the transceiver button to communicate). At the same time, the unit is capable of communicating with other wireless underwater units such as the OCEAN REEF GSM G.divers, GSM DC, GSM G-Power and GSM G-Power SL, M105 and M100 G.divers.

By pressing the button of the PTT, the unit is transmitting on channel 1 of ultrasonic frequency (channel 1 - 32.768 kHz). The GSM CUBE3 can be connected to a VHF radio through the waterproof carrying bag and other relevant connectors and interfaces. The GSM CUBE3 is equipped with a special plug for the six pin connector which can be used when you don't need to connect the cable. You can also connect and disconnect the unit to/from the cable while underwater.

Features

• GSM Cube 3 Wireless Communication System

• Underwater Communication Unit capable of operating wireless or hardwire or VHF.

• Operating Modes:

  • Connected to an ALPHA PRO X-DIVERS surface unit by cable - Hardwire

  • Connected to a Gamma 105 surface unit - Wireless

  • Connected to the VHF system - Becomes a GSM-VHF

  • Can connect to other wireless systems transmitting on channel 1 – 32.768 kHz

• Communicates with other wireless underwater units such as the OCEAN REEF GSM G.divers, GSM DC, GSM G-Power and GSM G-Power SL, M105 and M100 G.divers 

Specifications

• Rated Depth: 120 ft. (40 m)

• Powered By: 9V alkaline battery

• Color: Orange and black

• Weight: 1.44 lb. 

Sold Per Meter

OCEAN REEF's Professional Cable with Rope, Audio or Video is sold per meter and is available in any length. The professional cable includes a polyurethane jacket and yellow exterior rope to protect the cable from damage. The Professional Cable has a 900 lbs (4,000-newton resistance) breaking strength..

Specifications:

• Materials: Polyurethane jacket and yellow exterior rope to protect the cable from damage

• Strength: 900 lbs (4,000-newton resistance) breaking strength

• Audio or Video is sold per meter and is available in any length

FAQ's

What is the wire gauge size for the Ocean Reef Professional Cable?

1x Micro-coaxial: Conductor 28AWG, Tinned copper braid coverage >90%

4x Conductor 25AWG

Amron Field Spares Kit for 28XXA-XX Communicators w/ Internal Power Supply

Amron 28XXA-FS-02 Field Spares Kit for 28XXA-XX Communicators Includes

• (1) Toggle Switch – P/N: 7580K6

• (1) Toggle Switch – P/N: 757-3522

• (2) Yellow Push-To-Talk Buttons – P/N: PBSWITCH

• (2) Knurled Thumb Screws (Brass) – P/N: 8-32X3/4KTSB

• (1) Potentiometer 10K with Knob – P/N: P16NP-10K

• (1) Tip Jack (Red) – P/N: 105-0602-001

• (1) Tip Jack (Black) – P/N: 105-0603-001

• (2) Banana Jacks (Red) – P/N: 1498-102

• (2) Banana Jacks (Black) – P/N: 1498-103

• (2) Banana Jacks (Yellow) – P/N: 1498-107

• (2) Cooper Bussman Fuses, 4A/250V, Slo-Blo 5X20MM Glass Tube - P/N: 130-1002-01

• (2) Toggle Switch Seal Half Boots (Grey) – P/N: 5168

• (2) 5-Way Binding Posts (Black) – P/N: 14002B

• (2) 5-Way Binding Posts (Red) – P/N: 14002R

• (1) Fuses 3.15A/250V Micro Quick Acting – P/N: 0034.6019

• (2) Mounting Clips for 5mm LED – P/N: LEDHOLDER-BLK.25

• (1) LED Bi-Color Red/Green – P/N: LT2462-24-D51

• (1) LED Bright Green – P/N: LEDGREEN

*NOTE: To be used with Power Supply - P/N: 190-0101-00.

Amron 12 VDC Sealed Lead Acid Rechargeable Battery with Slide terminals

Specifications

• Standby Use:

  • Voltage Regulation: 13.6 -1 3.8v

  • Initial Current: 1.1A

• Cyclic Use:

  • Voltage Regulation: 14.5 - 14.9v

  • Initial Current: 2.2A

Amron 12 VDC Sealed Lead Acid Rechargeable Battery with Slide terminals supports the following

• AMCOM I - 2810E; 2810-01

• AMCOM II - 2820A/24; 2820A-01; 2825A/24; 2825A-01; 2825A/24/26DSP3; 2825A-02

• AMCOM II - 2825A/24/28FDW

• AMCOM III - 2830A/24; 2830A-01; 2830A/24-MS; 2830A-05; 2830A/24/26DSP3; 2830A-02

• AMCOM III - 2830A/24/26-MS; 2830A/24/28FDW

• AMCOM III - 2830A/24/28FDW-MS

• AMCOMMAND I - 8111; 8111-01

• AMCOMMAND II - 8225-HP; 8225-01

• AMCOMMAND II - 8225-HP2

Note: Amron reserves the right to change the battery brand at any time without notice.